Behringer NU3000DSP iNuke Power Amplifier with DSP (3000 Watts)

No longer available at zZounds
3000 watts are at your service with this lightweight power amp that features an on-board USB interface, iNuke DSP, and an interactive LED control panel.

The Behringer NU3000DSP iNuke power amplifier packs massive amounts of output power into an exceptionally lightweight, rack-mountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these feather-light powerhouses will drive your rig effortlessly for many years to come.

Superb Transient Response

Behringer spent years fine-tuning the high-density Class-D technology that gives the iNuke Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, these amps react instantly to even the most demanding electronic bass impulses.

When this amazing amplifier technology is combined with Behringer's state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.

Sublimely simple operation

The front panel controls and indicators provide your system's vital signs at a glance. After pressing the power button, the power LED lights to show the amp is ready for action. All channels feature positive-detent gain controls with signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.

The rear read more panel is just as elegant, with combo XLR and 1/4" TRS input connectors making the iNuke compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable iNuke amps to work in either dual mono, stereo or mono bridge mode. A built-in crossover switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to fullrange loudspeakers (CH1>100 Hz / CH2

iNuke DSP

For sound engineers requiring high-level control capability, iNuke DSP Series amplifiers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. All iNuke DSP models can also be set up, controlled and monitored via the front panel USB connector.

Value

Sporting massive output ratings, lightweight Class-D technology, an equally lightweight price tag, and all the amenities a professional audio engineer could ask for, Behringer iNuke amplifiers are serious amps for the most demanding applications.

Features

- Delivers 2 x 1520 Watts into 2 Ohms; 2 x 820 Watts into 4 Ohms; 2 x 440 Watts into 8 Ohms; 3000 Watts into 4 Ohms (bridge mode); 1520 Watts into 8 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg
- Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
- DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings
- Front panel LCD display enables setup and adjustment without PC
- Can be set up, controlled and monitored via front panel USB connector
- "Zero-Attack" limiters offer maximum output level with reliable overload protection
- Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
- Detented and illuminated gain controls for precise level setting
- Precise 4-segment Signal and Limit LEDs to monitor performance
- XLR and 1/4" TRS combination input connectors for compatibility with any source
- Professional twist-lock speaker connectors for ultimate reliability
- Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
- "Back-to-front" ventilation system prevents thermal buildup for reliable operation
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by Behringer Germany
read less

For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html

Behringer NU3000DSP Power Amplifier

The Behringer NU3000DSP iNuke power amplifier packs massive amounts of output power into an exceptionally lightweight, rack-mountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these feather-light powerhouses will drive your rig effortlessly for many years to come.

Superb Transient Response

Behringer spent years fine-tuning the high-density Class-D technology that gives the iNuke Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, these amps react instantly to even the most demanding electronic bass impulses.

When this amazing amplifier technology is combined with Behringer's state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.

Sublimely simple operation

The front panel controls and indicators provide your system's vital signs at a glance. After pressing the power button, the power LED lights to show the amp is ready for action. All channels feature positive-detent gain controls with signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.

The rear panel is just as elegant, with combo XLR and 1/4" TRS input connectors making the iNuke compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable iNuke amps to work in either dual mono, stereo or mono bridge mode. A built-in crossover switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to fullrange loudspeakers (CH1>100 Hz / CH2<100 Hz or fullrange). Flick the "Limiter On/Off" switch to activate the built-in overload protection, or turn it off if you're feeling lucky.

iNuke DSP

For sound engineers requiring high-level control capability, iNuke DSP Series amplifiers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. All iNuke DSP models can also be set up, controlled and monitored via the front panel USB connector.

Value

Sporting massive output ratings, lightweight Class-D technology, an equally lightweight price tag, and all the amenities a professional audio engineer could ask for, Behringer iNuke amplifiers are serious amps for the most demanding applications.

Features

- Delivers 2 x 1520 Watts into 2 Ohms; 2 x 820 Watts into 4 Ohms; 2 x 440 Watts into 8 Ohms; 3000 Watts into 4 Ohms (bridge mode); 1520 Watts into 8 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg
- Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
- DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings
- Front panel LCD display enables setup and adjustment without PC
- Can be set up, controlled and monitored via front panel USB connector
- "Zero-Attack" limiters offer maximum output level with reliable overload protection
- Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
- Detented and illuminated gain controls for precise level setting
- Precise 4-segment Signal and Limit LEDs to monitor performance
- XLR and 1/4" TRS combination input connectors for compatibility with any source
- Professional twist-lock speaker connectors for ultimate reliability
- Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
- "Back-to-front" ventilation system prevents thermal buildup for reliable operation
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by Behringer Germany

Reviewers gave this product an overall rating of 5 out of 5 stars. (6 ratings)
Submitted December 31, 2014 by Steve Stark in Spring, TX
"Excellent Amp for the price"
Overall: 5 out of 5 stars
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I have used this amp for 6 months in my Karaoke business. It is easy to use and has great features( really like the built in parametric EQ). The only issue I have had is the USB Connector on the front panel broke. After getting used to controlling the amp from the USB interface its kinda hard to go back to using the front panel so I just bought another NU3000DSP amp so that I can deactivate this one to send it in for repair.
Musical Background:
Karaoke/DJ- 2 years, Electronics Design Engineer- 30 years
Musical Style:
rock, country predominately
8 of 8 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer