Crown XLI2500 Power Amplifier (750 Watts)

The 750-watt Crown XLI2500 is an affordable solution to your small venue needs with RCA and balanced XLR inputs, a clip indicator, and stereo level controls.

Crown has done it again, designing a high-quality power amp for use in the real world, all at an incredible price. The Crown XLI2500 power amplifier represents a leap in affordable, quality power amplification. The XLI2500 has the power, reliable performance, and ease of use to be used by musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The Crown XLI2500 power amp has all the connections you need in order to get hooked up, including RCA and XLR inputs plus Speakon and binding post outputs. Other features include user selectable input sensitivity of 0.755V or 1.4V, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful example of quality and value.

Features:

- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

- Power Output:
- - 4 Ohms Stereo: 750 watts per channel
- - 8 Ohms Stereo: 500 watts per channel
- - 8 Ohms Bridge Mono: 1,500 watts
- Channels: 2
- Sensitivity (full rated power at 8 ohms): 0.775V or 1.4V
- Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted): > 100 dB
- Total Harmonic Distortion (THD) (20Hz - 20kHz): < 0.5-percent
- Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB): = / < 0.35 percent
- Frequency Response (at 1W, 20Hz - 20kHz): 0 dB, -1 dB
- Crosstalk (below rated power):
- - at 1kHz: -75 dB
- - at 20kHz: - 59 dB
- Damping Factor (from 10Hz to 400Hz, 8 ohms): > 200
- Dimensions (HxWxD): 3.5 x 19 x 12.4 inches
- Weight: 29.7 lbs
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 33 lbs
Shipping Dimensions: 22 x 21 x 6 in
Manufacturer Part Number (MPN): NXLI2500-0-US

For support or warranty questions, please contact the manufacturer:
Phone: 800-342-6939

Reviewers gave this product an overall rating of 5 out of 5 stars. (4 ratings)
Submitted March 2, 2021 by a customer from yahoo.com
"Amazing for home audio"
Overall: 5 out of 5 stars
Verified Customer zZounds has verified that this reviewer made a purchase from us.
Hello. I have owned all the high end brand amplifiers over the years. I sold HiFi in my 20s and have seen and heard it all. For kicks I put this amplifier in my main stereo system pushing a large pair of 7 driver each Legacy Focus speakers. I'm very surprised by the sound quality! It drives these speakers to their limits. Bass is insane. Most pro amps I've tried throughout the years sounded thin, bright and had no bass. This amp is not like that at all. I could totally live with this amp for many years to go. It's cheap power for sure. You can only use bare wire or bananas. For bananas I took a wood screw and screwed it in slightly to the little plastic plugs in the holes and pulled them out. No spades unfortunately.
2 of 2 people (100%) people found this review helpful. Did you?
Thanks for your opinion!