Crown XLI3500 Power Amplifier (1350 Watts)

Affordable yet powerful, the Crown XLI3500 Power Amplifier can add some serious oomph to your live sound setup with 1350 watts of dependable power.

The flagship Crown Xli3500 power amplifier offers a huge amount of power in an affordable, rugged and reliable live sound amplifier. Built for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs; the Xli3500 features 1350-watts of power, RCA and XLR inputs, selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series, it is a powerful example of quality and value.

Features:

- 1350 Watts per channel at 4 Ohms
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

- Channels: 2
- Guaranteed Minimum Power:
- - 4 ohm stereo (per channel): 1350 watts
- - 8 ohm stereo (per channel): 1000 watts
- - 8 ohm bridge mono: 2700 watts
- Sensitivity (full rated power at 8 ohms): 0.775V or 1.4V
- Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted): > 100 dB
- Total Harmonic Distortion (THD) (20Hz - 20kHz): < 0.5%
- Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB): = / < 0.35%
- Frequency Response (at 1W, 20Hz - 20kHz): 0 dB, -1 dB
- Crosstalk (below rated power):
- - at 1kHz: -75 dB
- - at 20kHz: - 59 dB
- Damping Factor (from 10Hz to 400Hz, 8 ohms): > 200
- AC Line Voltage and Frequency Configurations (+/- 10%):
- - 120VAC 60Hz
- - 220VAC 50/60Hz
- - 230-240VAC 50/60Hz
- Dimensions (H x W x D): 3.5 x 19 x 14.4 inches (89 x 482 x 366mm)
- Weight: 43.0 lb (19.5 kg)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 44 lbs
Shipping Dimensions: 22 x 21 x 6 in
Manufacturer Part Number (MPN): NXLI3500-0-US
Blemished, USED
Shipping Weight: 44 lbs
Shipping Dimensions: 22 x 21 x 6 in
Manufacturer Part Number (MPN): NXLI3500-0-US

For support or warranty questions, please contact the manufacturer:
Phone: 800-342-6939

Reviewers gave this product an overall rating of 5 out of 5 stars. (8 ratings)
Submitted May 19, 2018 by Maverick B in Macon, GA
"Awesome"
Overall: 5 out of 5 stars
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I bought this amp on the play as you pay plan. I'm glad I did. I'm a 39 yr entertainer. I've dealt a lot with peavey amps. Not because of sound. But they are so reliable. I've also owned some behringer. They are good amps. But they overstate the specs. This amp is the best I've owned. It has power to spare. Looks good on my rack. And it sounds better than any amp I've heard. Until now I thought amps were just a power source. Now I realize that it has a profound effect on the way my music sounds. Bass is punchier, mids are clean and highs are crisp. You can buy cheaper amp. But for under $700. This amp can't be beat......BUY IT You'll love it. I havent needed tech support yet. Its ease of use is why. I don't need dps. I prefer my own separate xover and eq.
Musical Background:
Bass player/singer/sound tech for nearly 40 yrs
Musical Style:
Funk ,Motown, beach, and contemporary jazz
29 of 30 people (97%) people found this review helpful. Did you?
Thanks for your opinion!