Shure MX418 Desktop Condenser Microphone

This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
open zoom image for Shure MX418 Desktop Condenser Microphone, MX418D/C, Cardioid, Main
Shure MX418 Desktop Condenser Microphone, MX418D/C, Cardioid, Main
zZounds Gear Experts Say...
With interchangeable cartridges, a shock mount, and transformerless output, this desktop mic captures accurate, clear sound in a variety of settings.

This model of the Shure MX418 features a built-in desktop base with 10-foot cable attached.

Microflex Standard Gooseneck microphones bring are flexible with their fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Features

- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges provide the right polar pattern for every application
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Shock mount provides over 20 dB isolation from surface vibration noise
- Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables

- Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
- Sensitivity (At 1,000 Hz, open circuit voltage*): -35.0 dBV/Pa (17.8 mV) All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
- Maximum SPL (1 kHz at 1% THD, 1 k ohm load): 124.2 dB All values +6 dB at 0 gain
- Equivalent Output Noise (A-weighted): 28.0 dB SPL
- Signal to Noise Ratio (referenced at 94 dB SPL): 66.0 dB
- Dynamic Range at 1 k ohm load: 96.2 dB, 100 dB at 0 gain
- Common Mode Rejection: 45.0 dB minimum
- Preamplifier Output Clipping Level (1% THD): 6.0 dBV (0.5 V), 12 dBV at 0 gain
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
- Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
- Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
- Relative Humidity: 0 to 95%

Dimensions and Weight in Packaging

MX418D/C, Cardioid

  • Shipping Weight: 4.25 lbs
  • Shipping Dimensions: 23 x 10 x 8 in
  • Manufacturer Part Number (MPN): MX418D/C

MX418D/S, Supercardioid

  • Shipping Weight: 3.62 lbs
  • Shipping Dimensions: 23 x 10 x 8 in
  • Manufacturer Part Number (MPN): MX418D/S

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Specification Sheet
User Guide

Be the first to rate and review this product.

MX418D/C, Cardioid

$375.00
  • 8 payments of 
    $46.88/mo
Easy Payment Plans, No Interest (Ever)
Reserve Now
Preorder Today
FREE -Day Shipping!
Get it for 
Get it (or get it with an order of ), if you order within
Shipping to