Samson S2000 Power Amplifier

No longer available at zZounds
Power amplifier.

The rugged new S2000 stereo amp from Samson delivers plenty of power, reliability, and protection in live sound situations, commercial installations, and PA situations. It produces 1000 watts per channel into 4 ohms (stereo mode) and 2000 watts into 8 ohms (bridged mono).

Other features include a wide frequency response; dual temperature-sensitive, speed-controlled fans; and a bipolar design for consistent performance. The S2000 also includes full front-panel control, metering, and protection capability along with a wide range of interconnect options.

Features
Roadworthy and reliable stereo and mono-bridgeable power amplifier

1000 watts per channel into 4 ohms (stereo mode) and 2000 watts into 8 ohms (bridged mono)

Linear frequency response for exceptional audio performance

Dual temperature-sensitive, speed-controlled fans

Bipolar design for stable performance

Front panel input level controls with 41 detents

3-segment output LED metering

Dual protection LEDs and relay-controlled outputs linked to protection LEDs

Banana jack outputs with Speakon(TM) connectors

XLR inputs and locking TRS inputs

Parallel outputs to "daisy-chain" a number of amps together

AC mains: IEC and Neutrik(R) Powercon connector included

Rated Output Power, per channel (1 kHz, THD 0.1%, Both Ch Drive)
Stereo/Parallel modes
per channel (into 4 ohms) 1020 W
per channel (into 8 ohms) 685 W

Bridged mode
per channel (into 8 ohms) 2025 W

Frequency Response (0 dB, +0.5, -1 dB) 10 Hz - 50 kHz

Total Harmonic Distortion:
(1/2 power @ 20 Hz - 20 kHz, Both Ch Drive into 4 ohms)
0.016%

Dynamic Range: 98 dB

Channel Separation: (8 ohm, 335 W, 1 kHz) 85 dB

Residual Noise (0 dB ref. = .775 VAC rms, 22 Hz - 22 kHz)
(Att. Min.) -69.4 dBu
(Att. Max.) -63.8 dBu

Voltage Gain (4 ohm, 1 kHz) 38.25 dB

DC Offset Voltage: 0 ± 100 mV

Damping Factor: More than 200

Indicators:
Clipping LED 1 kHz THD 0.1%
Signal LED Right -20 dB ± 2 dB
Signal LED Left -40 dB ± 2 dB

Dimensions (W x D x H): 19 x 9.75 x 5.25 in. (482 x 247 x 133.35 mm)

Weight: 53 lbs. (24 kg)

For support or warranty questions, please contact the manufacturer:
Phone: 516-870-7200
Web: http://www.samsontech.com/contact/

Reviewers gave this product an overall rating of 4.5 out of 5 stars. (33 ratings)
Submitted April 13, 2004 by a customer from uplink.net

"Twice the Bang for you buck! Never run out of power!"

Overall: 4.5 out of 5 stars
(see rating details)
I now own the s700 and the servo 550 along with s-com and s-3way. My power rack is all samson and I will never change it! I will be replaceing my s700 w/s1500 for mid bass on triamp setup for more uniform efficency across transducers.
Sound
Crystal clear audio and awesome dampining. Loads of power reserve. Works great using full range or to power subs. Just make sure you plug it in by itself or you will run out of juice.
Features
Easy to set up and daisy chain or run parallel or bridged mono. Wish it was 2 ohm stable though.
Quality
I've had this amp about 1 year and I use it weekly. Never had it shut down or fade. One of the most reliable amps I've owned. Better than QSC or Crown for sound Quality. Enormous pollished aluminium heat sinks(2) and 2 120mm variable fans. Looks like max 100 cfm each. This thing moves a lot of air and keeps really cool. Huge toridal transformer! Amp weighs 53Lbs though, kind of heavy but worth it!
Value
You get the best sound and power output from Samson than any other brand for the price range.
Manufacturer Support
I dunno. Never had to use it. Just remember to send in the warranty card so you get 3 years instead of one.
The Wow Factor
I just wish you could run 4 ohm stable bridged mono.

Musical Style:

All types
11 of 14 people (79%) people found this review helpful. Did you?
Thanks for your opinion!

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer