QSC TouchMix-30 Pro Digital Mixer, 32-Channel

- Display: 10" diagonal, color TFT, touch sensing
- Inputs (Mic/Line): 32 Total
- 4, XLR/TRS combi
- 20, XLR
- 6 Balanced, 1/4" TRS
- Input (Talkback) : 1, XLR
- Outputs:
- 2 Main, XLR, Line
- 14 Aux XLR, Line
- 2 Stereo Aux. TRS, (Line or In Ear Monitor, 16 Ohm min. impedance)
- 2 Stereo Monitor, TRS, (Line or headphone, 16 Ohm min. impedance)
- 2 Stereo Cue, TRS, (Line or headphone, 16 Ohm min. impedance)
- Mic & Line Input Channel Processing: 4-band, parametric EQ with Hi/Low shelving option, variable 24db/octave HPF & LPF, Gate, Compressor, Delay
- Output Channel Processing: Main outputs and auxes 1 - 6: 1/3 octave GEQ, Variable HPF and LPF, Compressor / Limiter, 100ms Delay, 12-band Anti-Feedback Filters
- Recording: 32 tracks
- Groups: 8 DCA groups (with mutes), 8 Mute groups
- Cue: Selectable, AFL, PFL, Solo In Place
- Effects:
- 6 simultaneous, professional effects engines including reverb, echo, delay, chorus, pitch shift
- 1 Pitch Correct (assignable to any mono input channel)
- Preset Memory: 99 User Scenes, 120 Factory Presets, 99 User Presets
- Digital Connections: 2 USB A connectors, 1 USB B connector, 1 RJ-45 port (connection for Wi-Fi router)
- External Control: TouchMix-30 Control App for iOS and Android devices controls all mixer functions via Wi-Fi.
- Wi-Fi: Requires external ethernet Wi-Fi router (recommended) or USB Wi-Fi adaptor (not included)
- Dimensions (H x W x D) : 7.5 in X 16.9 in X 18.1 in (19 cm X 42.9 cm X 46 cm)
- Weight: 17.5 lb (7.9 kg)
- Line Voltage Requirements: 85 W, 100-240 VAC, 50-60 Hz
- Sampling Frequency: Selectable 44.1kHz or 48kHz
- Internal Processing: 32-bit floating point
- Frequency Response: 20 Hz - 20 kHz +/-0.5 dB, any input to any output
- Dynamic Range: 105dB
- Equivalent Input Noise: -126dBu
- Residual Output Noise: -86dBu
- Crosstalk: -80dB
- S/N Ratio: -94dB
- Maximum Input Level: +16 dB (XLR mic/line inputs), +26 dB (TRS mic/line inputs), +24 dBu (TRS line inputs), 0 dBv (top panel 1/8" stereo input)
- Phantom Power: 48V, individually switchable per channel
- Included Accessories: Power cable
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 25.5 lbs
Shipping Dimensions: 23 x 19 x 12 in
Manufacturer Part Number (MPN): TouchMix-30-NA
with TouchMix Tote and TS1 Tablet Stand
Shipping Weight: 32.25 lbs
If you have additional warranty questions, please contact the manufacturer at 800-772-2834
(2 ratings)
Submitted May 10, 2017 by Chuck H in McRae-Helena, GA
"What's Not To Like?"
Verified Customer zZounds has verified that this reviewer made a purchase from us.
This review has been selected by our experts as particularly helpful.
I've used this board on a few gigs now, and although I'm still learning to get around it, it's proven to be all it's advertised to be. The feedback elimination function is great to have and easy to use. Layout is simple. Effects are very useful. Screen is visible and maneuverable. I've tracked three shows now with an external SSD hard-drive (Glyph) with no problems at all. I take the SSD drive back to my studio, plug into my Mac Pro and in just a few seconds I've got the tracks loaded. I went ahead & purchased the SKB waterproof case for mine, as I hope to get many years of use out of this board. So far, no complaints at all.

The preamps seem to have a good quality & sound. Effects are great, with 6-channels of effects with delays, reverbs, or other useful goodies. Output signal seems solid. Nice to have a dedicated talkback mic input. Easy to view the parameters of each channel via the all-inclusive full-screen page, where you have all the parameters of that channel right in front of you.

Most useful features to me are the USB direct plug-in recording-to-SSD drive, tablet / iPad control, overall channel pages, and feedback eliminator. Often my gigs are on small stages, and feedback can be an issue. I also like to get "out front" when sound-checking. Recording to an external USB SSD drive is a breeze.

Ease of Use
If you're not familiar with mixing boards, you will read more

The product seems solidly built. Because of the nature of the product, I would think that the internal components should last a long time.

For what this board offers, it's definitely worth the price.

Manufacturer Support
I've had no need for factory support.

Musical Background:
Performer, Studio Owner, Instructor, All Around Audio Guru

Musical Style:
Rock, Country, Christian, Jazz, Blues, Songwriter
read less
17 of 17 people (100%) people found this review helpful. Did you?
Thanks for your opinion!


  • 18 x
  • 12 x
  • 8 x
On Backorder
Preorder Today
FREE -Day Shipping!
Get it  for
Get it by if you order within Faster Shipping
Shipping to
SALE: Save $200 on a QSC TouchMix-30 Pro! Was $2,099.99, Now Only $1899.99
  • For a limited time, save $200 when you buy this product at zZounds. Hurry -- sale ends June 30!
Shipping to
Chat With Us