Audix FireBall V Harmonica Microphone with Volume Control

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Audix FireBall V Harmonica Microphone with Volume Control, Main
Audix FireBall V Harmonica Microphone with Volume Control, Main
Audix FireBall V Harmonica Microphone with Volume Control, Main
Audix FireBall V Harmonica Microphone with Volume Control, Main Audix FireBall V Harmonica Microphone with Volume Control, Main Audix FireBall V Harmonica Microphone with Volume Control, Main
zZounds Gear Experts Say...
Designed to be cupped in your hands, the FireBall is made for harmonica and beatboxing. Go ahead and get loud -- this tough mic handles up to 140 dB SPL.

The FireBall is a professional dynamic microphone specially designed for harmonica. It is well suited for both diatonic and chromatic instruments. Characterized with a cardioid pick-up pattern and a smooth, uniform frequency response of 50-15k, the FireBall will handle both live sound and studio applications. The microphone is clear, accurate, and capable of handling sound pressure levels in excess of 140dB without distortion.

In addition to harmonica, the Fireball can also be utilized for saxophone, brass, flute, and vocals.

Transformerless design, low impedance, and balanced output allow interference-free performance, even with long cable runs. The FireBall consists of a durable steel mesh grill with a CNC machined aluminum body that is coated with a three-stage anodizing process.

Transducer Principle: Dymamic, Moving Coil

Frequency Response: 50 Hz - 16 kHz

Polar Pattern: Cardioid

Output Impedance: 150 Ohms balanced

Sensitivity: 1.9 mV (ref 1k @ 1 Pascal)

Capsule Technology: VLM Type B

Off Axis Rejection: >23 dB

Maximum SPL: >140 dB

Cable/Connector: 3 pin gold-plated male XLR connector

Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector

Housing/Finish: Aluminum/Anodized

Weight: 4.5 oz./127.5 grams

Length: 3 in./76 mm

For support or warranty questions, please contact the manufacturer:
Phone: 503-682-6933 / 800-966-8261
Email: info@audixusa.com
Spec Sheet

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer