SKB 3i Waterproof Series Microphone Case




zZounds Gear Experts Say...
Keep your microphones safe wherever you roam! These SKB cases feature a foam interior with individual mic drops, and a dust-tight, water-tight exterior.
Overview
The SKB 3i Waterproof Series Microphone Case holds mics stored vertically and is part of the 3I Waterproof Series of cases. 3i Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Patent pending "trigger release" latch system
- Rubber over-molded cushion grip handle
The interior foam is cut on the water jet machine SKB is now using to cut custom foam and design products. The case has convoluted foam in the lid for a compression fit. The allows for all mics to be stored vertically. The two step mic holes are designed to secure any type of mic and the vertical storage provides instant access. In addition the case includes a generous padded storage compartment for cables and mic clips.
Features:
- Ultra high-strength polypropylene copolymer resin- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Patent pending "trigger release" latch system
- Rubber over-molded cushion grip handle
The interior foam is cut on the water jet machine SKB is now using to cut custom foam and design products. The case has convoluted foam in the lid for a compression fit. The allows for all mics to be stored vertically. The two step mic holes are designed to secure any type of mic and the vertical storage provides instant access. In addition the case includes a generous padded storage compartment for cables and mic clips.
Specs
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9" x 7" x 4" deep and is the most compact 3-mic case on the market. The case has convoluted foam in the lid for a compression fit.
The 3i-0907-MC6 holds six mics in a very compact case and is part of the 3i Waterproof Series of cases. It allows 6 mics to be stored horizontally on two separate layers of foam (3 on top and 3 on bottom). Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3i-0907-MC6 case measures 9" x 7" x 6" deep and is the most compact 6-mic case on the market. The case has convoluted foam in the lid for a compression fit.
The 3I-2015-MC24 case is the largest mic case and holds (24) mics vertically. It includes a large accessory section to store cables, mic clips, direct boxes, and more.
The 3i-0907-MC6 holds six mics in a very compact case and is part of the 3i Waterproof Series of cases. It allows 6 mics to be stored horizontally on two separate layers of foam (3 on top and 3 on bottom). Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3i-0907-MC6 case measures 9" x 7" x 6" deep and is the most compact 6-mic case on the market. The case has convoluted foam in the lid for a compression fit.
The 3I-2015-MC24 case is the largest mic case and holds (24) mics vertically. It includes a large accessory section to store cables, mic clips, direct boxes, and more.
- Dimensions and Weight in Packaging
- Fits 3 Microphones, 3I-0907-MC3
- Shipping Weight: 3 lbs
- Shipping Dimensions: 11 x 10 x 5 in
- Manufacturer Part Number (MPN): 3i-0907-MC3
- Open Box (Very Good), Fits 3 Microphones, 3I-0907-MC3
- Shipping Weight: 3 lbs
- Shipping Dimensions: 11 x 10 x 5 in
- Manufacturer Part Number (MPN): 3i-0907-MC3
- Fits 6 Microphones, 3I-0907-MC6
- Shipping Weight: 9.5 lbs
- Shipping Dimensions: 11 x 10 x 10 in
- Manufacturer Part Number (MPN): 3I-0907-MC6
- Fits 24 Microphones, 3I-2015-MC24
- Shipping Weight: 18.25 lbs
- Shipping Dimensions: 24 x 19 x 12 in
- Manufacturer Part Number (MPN): 3i-2015-MC24
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 714-685-5225
Email: customerservice@skbcases.com
Web: https://shop.skbcases.com/form--contact
Phone: 714-685-5225
Email: customerservice@skbcases.com
Web: https://shop.skbcases.com/form--contact
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(3 ratings)
Submitted December 4, 2011 by a customer from yahoo.com
"Built very well. I am happy with my purchase."
Verified Purchaser
zZounds has verified that this reviewer purchased this specific product from us.
I believe that this will suit me for many years. I have already recommended it to others. Yes, I would replace it with the same product.
Sound
N/A
Features
It has everything that it says it has.
Ease of Use
Well, it's pretty simple to use.
Quality
It is built very nicely. I don't expect the clamps to fail on it anytime soon. I feel that my mics are very well protected.
Value
I believe that it is worth it so far.
Manufacturer Support
N/A
The Wow Factor
To be honest most would not spend much money on a mic box. I wanted one to protect my investment and have it look good too.
Musical Background:
I do not play any instruments. I run sound for live bands. I have been doing sound for over 8 years.
Musical Style:
All of the above
4 of 4 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Fits 3 Microphones, 3I-0907-MC3
$94.99
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.