- Home |
- Guitar |
- Bass |
- Keyboard |
- Recording |
- Computer Music |
- Live Sound |
- Drums |
- DJ |
- Accessories |
- Blowouts
This product is no longer available at zZounds.
Shop our website for related products:
(In most cases, a product is unavailable because it has been discontinued by its manufacturer.)
Nady PRM400 6-Channel Powered Mixer with DSP Effects
Internal AC supply. Road-tough all steel construction. Rack ears supplied.
Our 30-Day 100% Satisfaction Guarantee applies on this item. Buy it, and if it isn't just right for you, return it!
Description
Docs
A compact, desk console or rackmountable 200W/channel stereo powered mixer with 16 built-in selectable preset DSP echo and reverb effects and a comprehensive mixer section with extensive routing capability. A useful, versatile audio tool that combines exceptional flexibility, and performance, the PRM-400 is ideal for many small venue live sound reinforcement applications.
Features
Superior audio performance with low noise and powerful, full-spectrum transparent audio and natural sounding selectable echo/reverb effects
6 mono balanced XLR mic and unbalanced 1/4 in. line inputs, trim controls and switchable 20dB pads, 3-band EQs, Peak overload LEDs, Aux, ,Pan controls
Aux/Monitor switch allows the PRM-400 to be used as either a stereo main or a mono main and monitor powered mixer
Stereo power amplifier delivers 200W/side @ 4 Ohms. Fan-cooled, bipolar amplifier design for longest life and maximum reliability.
Dual 7-band graphic EQ can be used in stereo or mono for main and monitor EQ
Aux Send and Aux Return with Aux Send and Aux Return controls
6 balanced 1/4 in. TRS inserts allow independent connection of effects devices for each mono channel
Stereo Master inserts and Post EQ 1/4 in. TRS jacks
60 mm faders on all channels and master L/R and Effect bus mix for precise level control
High quality sealed pots with center detents
Tape In and Record Out RCA jacks with Tape level control
Built-in DSP (Digital Sound Processor) for ECHO (REVERB) with 16 selectable preset level and echo intervals and separate Repeat control, Effects Send, and individual channel
Effects Return controls, separate effects PFL monitoring, and numeric LED display
Headphone output with separate volume adjust
PFL control for each channel allows headphone monitoring independent of channel volume
Switchable global 48V phantom power
Dual 10-segment LED meter for L/R main and PFL
White erasable area above all faders for notations
Internal AC supply with 115/230V select switch
Road-tough all steel construction
Rack ears supplied
Weight: 27.8 lbs. (12.6 kg)
Features
Superior audio performance with low noise and powerful, full-spectrum transparent audio and natural sounding selectable echo/reverb effects
6 mono balanced XLR mic and unbalanced 1/4 in. line inputs, trim controls and switchable 20dB pads, 3-band EQs, Peak overload LEDs, Aux, ,Pan controls
Aux/Monitor switch allows the PRM-400 to be used as either a stereo main or a mono main and monitor powered mixer
Stereo power amplifier delivers 200W/side @ 4 Ohms. Fan-cooled, bipolar amplifier design for longest life and maximum reliability.
Dual 7-band graphic EQ can be used in stereo or mono for main and monitor EQ
Aux Send and Aux Return with Aux Send and Aux Return controls
6 balanced 1/4 in. TRS inserts allow independent connection of effects devices for each mono channel
Stereo Master inserts and Post EQ 1/4 in. TRS jacks
60 mm faders on all channels and master L/R and Effect bus mix for precise level control
High quality sealed pots with center detents
Tape In and Record Out RCA jacks with Tape level control
Built-in DSP (Digital Sound Processor) for ECHO (REVERB) with 16 selectable preset level and echo intervals and separate Repeat control, Effects Send, and individual channel
Effects Return controls, separate effects PFL monitoring, and numeric LED display
Headphone output with separate volume adjust
PFL control for each channel allows headphone monitoring independent of channel volume
Switchable global 48V phantom power
Dual 10-segment LED meter for L/R main and PFL
White erasable area above all faders for notations
Internal AC supply with 115/230V select switch
Road-tough all steel construction
Rack ears supplied
Technical Info
Dimensions: 16 x 17 x 6 in. (406 x 432 x 152mm)Weight: 27.8 lbs. (12.6 kg)
What Our Customers Say About zZounds
"Great Prices and a big selection. Customer service staff is professional and polite to work with." - customer on November 17, 2009
Nady PRM400 6-Channel Powered Mixer with DSP Effects Reviews
10 out of 10
zZounds has verified that this customer bought this product from us.
"This Powered Board has it all, and you won't need a chiopractor!!!!"
Feature:
The built in effects are handy, although I don't use them to process my voice. I use seperate processing. The but its great to use on the band members. Each channel has an insert for routing effects and that's great! The best part about the amp is that it is a 400 watt amp and board that weighs under 30 pounds, it's fully functional and great to take around to small venues...plenty of power for my Bose Speakers! Can be set to run 200 watts on house speakers and 200 watts on monitors.
Quality:
It seems to be made will. The finish is great, the rack ears are a little hard to mount because of the handles that are on the sides that have to be removed. I always rack mount my equipment and that seems to protect it. I can't say about taking this unit on the road if it is not rack mounted. So far, it seems to do well in the rack. The cosmtics are okay, they seem a little more delicate than a Mackie Board in terms of the finish...It's hard for me to say bacause I take really good care of my stuff...it never sees abuse.
Value:
It's WAY worth the selling price....big bang for your buck!!
Desirability:
It's kinda sexy in a Buck Rodgers Sci Fi Way. The Looks are nice, the mechanics and smoother, although I have felt smoother faders. The best part of this item is that it is fully equipped with the best bells and whistles, it weighs under 30 pounds, it is rack mountable and will let you power your speakers with 400 watts of power...perfect for those small venues!!!
Sound:
The Nady PRM gives good sound right out of the box. I loaded it in my rack and attached my varitey of equipment and got a great sound. The signal was clear and strong. The only thing that is different from my Mackie board is that you have to run the main and channel signals hot with the PRM. This doesn't cause any problem with the sound, it's just that the faders don't really get sensitive and responsive until they are near the top/max. So I had to get used to adjusting the volume within much smaller range of motion than I was used to, but it is very responsive.
Support:
I have used Nady Ear Monitors for years and contacted customer support once concerning them and it was an entirely professional experience. As far as the PRM mixer, I ordered one (one of the first sold) and cosmetically I wasn't pleased with it when it arrived. I called Nady, and they shipped me another the next day. That board was fine. The tech I dealt with at Nady was great! The customer service guys need a little training on dealing with customers in a more professional way...in other words, I don't want to see them sweat and I did see them sweat. It was a very new product and I think they were scrambling for the answers...
Overall:
I should be happy with this for quite a while...It meets my needs in every way and the price makes it the deal of the century. I like best the variety of features that are needed on pro gigs. I like least that it is silver...I would prefer a darker metalic look like the Mackie....it blends better on stage.
The built in effects are handy, although I don't use them to process my voice. I use seperate processing. The but its great to use on the band members. Each channel has an insert for routing effects and that's great! The best part about the amp is that it is a 400 watt amp and board that weighs under 30 pounds, it's fully functional and great to take around to small venues...plenty of power for my Bose Speakers! Can be set to run 200 watts on house speakers and 200 watts on monitors.
Quality:
It seems to be made will. The finish is great, the rack ears are a little hard to mount because of the handles that are on the sides that have to be removed. I always rack mount my equipment and that seems to protect it. I can't say about taking this unit on the road if it is not rack mounted. So far, it seems to do well in the rack. The cosmtics are okay, they seem a little more delicate than a Mackie Board in terms of the finish...It's hard for me to say bacause I take really good care of my stuff...it never sees abuse.
Value:
It's WAY worth the selling price....big bang for your buck!!
Desirability:
It's kinda sexy in a Buck Rodgers Sci Fi Way. The Looks are nice, the mechanics and smoother, although I have felt smoother faders. The best part of this item is that it is fully equipped with the best bells and whistles, it weighs under 30 pounds, it is rack mountable and will let you power your speakers with 400 watts of power...perfect for those small venues!!!
Sound:
The Nady PRM gives good sound right out of the box. I loaded it in my rack and attached my varitey of equipment and got a great sound. The signal was clear and strong. The only thing that is different from my Mackie board is that you have to run the main and channel signals hot with the PRM. This doesn't cause any problem with the sound, it's just that the faders don't really get sensitive and responsive until they are near the top/max. So I had to get used to adjusting the volume within much smaller range of motion than I was used to, but it is very responsive.
Support:
I have used Nady Ear Monitors for years and contacted customer support once concerning them and it was an entirely professional experience. As far as the PRM mixer, I ordered one (one of the first sold) and cosmetically I wasn't pleased with it when it arrived. I called Nady, and they shipped me another the next day. That board was fine. The tech I dealt with at Nady was great! The customer service guys need a little training on dealing with customers in a more professional way...in other words, I don't want to see them sweat and I did see them sweat. It was a very new product and I think they were scrambling for the answers...
Overall:
I should be happy with this for quite a while...It meets my needs in every way and the price makes it the deal of the century. I like best the variety of features that are needed on pro gigs. I like least that it is silver...I would prefer a darker metalic look like the Mackie....it blends better on stage.
Submitted: 11/14/2003
Style of Music: Jazz, pop
Questions? Our musicians can help you right now!
Mention Priority Code 7FDLWXD When You Call.
Toll Free En Español: 800.460.7976 9 AM to
5 PM EST
Shop with those who respect your privacy—
we do.
Copyright © 1996-2009, zZounds Music, LLC.
Terms of use apply.
A-ID: 3745