Peavey SP2 II Passive, Unpowered 2-Way PA Speaker (1000 Watts, 1x15")





zZounds Gear Experts Say...
Loaded with 15" BWX Black Widow woofers and asymmetrical Quadratic Throat tweeters, these workhorse passive PA speakers make great mains or monitor wedges.
Overview
The Peavey SP 2 two-way, full-range/bi-ampable Sound Reinforcement system features a premium 15" BWX Black Widow 4" diameter VC woofer with field-replaceable basket, RX 22CT compression driver, and Sound Guard III tweeter protection. Engineered for optimal sound reproduction with proven reliability continuing a 30-year legacy, Peavey SP enclosures feature exclusive asymmetrical Quadratic Throat Waveguide technology that helps deliver pristine, precise sound. Asymmetrical horn aims the coverage pattern 15* upward and 35* downward - directing sound to your audience, not over their heads.
- 54Hz-17kHz
- Patented Asymmetrical Quadratic Wave Guide Horn
- 1000 Watts Program 2000 Watts Peak
- Painted Ply-Wood Enclosure
- 2" Titanium HF Driver
- Monitor Cut
- Pole Mount
- Multiple Fly Points
- 15" BWX Driver Field replaceable Basket with 4" Voice Coil
- Impedance: 8 ohms
Note: Unpowered speaker, requires separate power amplifier.
Features:
- 2-Way, Full Range, Bi-ampable Sound Reinforcement system- 54Hz-17kHz
- Patented Asymmetrical Quadratic Wave Guide Horn
- 1000 Watts Program 2000 Watts Peak
- Painted Ply-Wood Enclosure
- 2" Titanium HF Driver
- Monitor Cut
- Pole Mount
- Multiple Fly Points
- 15" BWX Driver Field replaceable Basket with 4" Voice Coil
- Impedance: 8 ohms
Note: Unpowered speaker, requires separate power amplifier.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Pole Socket Size: 1-3/8" (35 mm)
- Dimensions: (L x W x H) 23.63 x 20.63 x 31.19"
- Weight: 82.6 lbs
Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 64 Hz to 17 kHz (±3 dB)
Usable Low Frequency limit (-10 dB point): 49 Hz
Power Handling:
Full Range: 500 W continuous, 1,000 W program, 2,000 W peak
Low Frequency Section: 500 W continuous, 1,000 W program, 2,000 W peak
High Frequency Section: 50 W continuous, 100 W program, 200 W peak
Sensitivity/Sound Pressure Level, 1 Watt, 1 meter in anechoic environment:
Full Range: 97 dB SPL, (2.83 V input)
Low Frequency Section: 98 dB SPL, (2.83 V input)
High Frequency Section: 105 dB SPL, (2.83 V input)
Maximum Sound Pressure Level (1 meter):
Full Range: 124 dB SPL continuous, 130 dB SPL peak
Low Frequency Section: 125 dB SPL continuous, 131 dB SPL peak
High Frequency Section: 125 dB SPL continuous, 131 dB SPL peak
Radiation Angle measured at -6 dB point of polar response:
100 deg. Horizontal by 50 deg. Vertical
The vertical main polar lobe is angled down 10 degrees with respect to straight ahead, the vertical coverage angles being +15. –35 deg.
Transducer Complement:
Low Frequency Section: 1 x 15” woofer, vented; Black Widow® 1508-8 SPS
High Frequency Section: 1 x 1.0” exit, 50 mm voice coilRX22CT compression driver on asymmetrical Quadratic Throat CD Horn
Box Tuning Frequency:
Low Frequency Section: 50 Hz
Electroacoustic Crossover Frequency (internal passive):
Low Frequency - High Frequency: 1,800 Hz
Recommended Active Crossover Frequency Region and Slope:Low Frequency - High Frequency: 2.0 kHz at 24 dB/octave LR
Time Offset:
Low Frequency: 0.0 ms
High Frequency: 0.31 ms
Impedance (Z):
Full Range: Nominal: 8.0 Ω, Minimum 6.0 Ω
Low Frequency: Nominal: 8.0 Ω, Minimum: 6.0 Ω
High Frequency: Nominal:8.0 Ω, Minimum: 7.9 Ω
Input Connections:
Full range: two 1/4” phone jacks, one four-pin, twist lock connector & one Neutrik NL4 Speakon switching jack (bi-amp only)
Enclosure Materials & Finish: Plywood coated with a textured black polyurethane finish. Full length black powder coated metal grille.
Mounting provisions: M8 Threaded Mounting Suspension Points (3 top, 3 bottom and 2 each side & 1 each top rear and bottom rear).
Built-in stand-mount adapter and four large rubber feet on bottom for floor use.
- Dimensions: (L x W x H) 23.63 x 20.63 x 31.19"
- Weight: 82.6 lbs
Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 64 Hz to 17 kHz (±3 dB)
Usable Low Frequency limit (-10 dB point): 49 Hz
Power Handling:
Full Range: 500 W continuous, 1,000 W program, 2,000 W peak
Low Frequency Section: 500 W continuous, 1,000 W program, 2,000 W peak
High Frequency Section: 50 W continuous, 100 W program, 200 W peak
Sensitivity/Sound Pressure Level, 1 Watt, 1 meter in anechoic environment:
Full Range: 97 dB SPL, (2.83 V input)
Low Frequency Section: 98 dB SPL, (2.83 V input)
High Frequency Section: 105 dB SPL, (2.83 V input)
Maximum Sound Pressure Level (1 meter):
Full Range: 124 dB SPL continuous, 130 dB SPL peak
Low Frequency Section: 125 dB SPL continuous, 131 dB SPL peak
High Frequency Section: 125 dB SPL continuous, 131 dB SPL peak
Radiation Angle measured at -6 dB point of polar response:
100 deg. Horizontal by 50 deg. Vertical
The vertical main polar lobe is angled down 10 degrees with respect to straight ahead, the vertical coverage angles being +15. –35 deg.
Transducer Complement:
Low Frequency Section: 1 x 15” woofer, vented; Black Widow® 1508-8 SPS
High Frequency Section: 1 x 1.0” exit, 50 mm voice coilRX22CT compression driver on asymmetrical Quadratic Throat CD Horn
Box Tuning Frequency:
Low Frequency Section: 50 Hz
Electroacoustic Crossover Frequency (internal passive):
Low Frequency - High Frequency: 1,800 Hz
Recommended Active Crossover Frequency Region and Slope:Low Frequency - High Frequency: 2.0 kHz at 24 dB/octave LR
Time Offset:
Low Frequency: 0.0 ms
High Frequency: 0.31 ms
Impedance (Z):
Full Range: Nominal: 8.0 Ω, Minimum 6.0 Ω
Low Frequency: Nominal: 8.0 Ω, Minimum: 6.0 Ω
High Frequency: Nominal:8.0 Ω, Minimum: 7.9 Ω
Input Connections:
Full range: two 1/4” phone jacks, one four-pin, twist lock connector & one Neutrik NL4 Speakon switching jack (bi-amp only)
Enclosure Materials & Finish: Plywood coated with a textured black polyurethane finish. Full length black powder coated metal grille.
Mounting provisions: M8 Threaded Mounting Suspension Points (3 top, 3 bottom and 2 each side & 1 each top rear and bottom rear).
Built-in stand-mount adapter and four large rubber feet on bottom for floor use.
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 60.75 lbs
- Shipping Dimensions: 30 x 21 x 20 in
- Manufacturer Part Number (MPN): 03614800
- Pair
- Shipping Weight: 121.5 lbs
Note: Unpowered speaker, requires separate power amplifier.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(1 ratings)
Submitted June 27, 2018 by james crouse in frenchcreek, WV
"sp2 peavey speakers"
Verified Purchaser
zZounds has verified that this reviewer purchased this specific product from us.
good sound! handle lots of power run them with a peavey ipr 7500 1200 watts per channal sound great
Musical Background:
sound man
Musical Style:
rock country bluegrass
7 of 8 people (88%) people found this review helpful. Did you?
Thanks for your opinion!
New
$799.99
- 12 x$66.67
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.