Walrus Audio Canvas Rehearsal Pedal







zZounds Gear Experts Say...
Rehearse with silent precision! Walrus Audio's Canvas Rehearsal pedal offers clean signal routing and stereo support for effortless practice sessions.
Overview
The Canvas Rehearsal is your all-in-one rehearsal tool. Designed for musicians who use effect pedals, you can listen to your instrument through headphones, play with tracks via Bluetooth or 1/8" auxiliary input, and practice with a built-in metronome. The Canvas Rehearsal is the perfect end-of-chain solution when your gig requires your practice to become perfection.
The Rehearsal is loaded with features to simplify practice with maximum results. The OLED display gives quick readouts of BPM (Beats Per Minute), Time Signature, Beat Division, and Accent Note. Simply rotate the Screen Control Encoder to fine -tune settings and press down to cycle to the next parameter.
The BPM can be set in three different ways:
- Use the Tap Tempo button on the face of the pedal to quickly tap in a tempo.
- Press and hold the Start/Stop switch to enter "Tap Mode" then tap in a tempo by pressing down on the switch.
- Dial in a precise tempo by using the Screen Control Encoder to any specific tempo from 40 to 250 BPM.
- Meter, Tap Division, and accent beat can be further customized with your BPM as well.
Flexible volume controls allow for your perfect practice mix. Separately adjust and set the volume for your instrument, metronome, and auxiliary audio input then use the main headphone volume to adjust the overall output.
The Rehearsal can be controlled via standard MIDI messages. Simply connect your MIDI controller to the Rehearsal MIDI "IN". Downstream MIDI devices can be connected to the MIDI… read more "OUT" which serves as a MIDI pass-through.
- Listen to instrument through Headphones
- Play Tracks via Bluetooth or 1/8" aux input
- Built-in Metronome
- BPM (Beats Per Minute), Time Signature, Beat Division, and Accent Note options
read less
The Rehearsal is loaded with features to simplify practice with maximum results. The OLED display gives quick readouts of BPM (Beats Per Minute), Time Signature, Beat Division, and Accent Note. Simply rotate the Screen Control Encoder to fine -tune settings and press down to cycle to the next parameter.
The BPM can be set in three different ways:
- Use the Tap Tempo button on the face of the pedal to quickly tap in a tempo.
- Press and hold the Start/Stop switch to enter "Tap Mode" then tap in a tempo by pressing down on the switch.
- Dial in a precise tempo by using the Screen Control Encoder to any specific tempo from 40 to 250 BPM.
- Meter, Tap Division, and accent beat can be further customized with your BPM as well.
Flexible volume controls allow for your perfect practice mix. Separately adjust and set the volume for your instrument, metronome, and auxiliary audio input then use the main headphone volume to adjust the overall output.
The Rehearsal can be controlled via standard MIDI messages. Simply connect your MIDI controller to the Rehearsal MIDI "IN". Downstream MIDI devices can be connected to the MIDI… read more "OUT" which serves as a MIDI pass-through.
Features:
- Great for players who believe that practice makes perfect- Listen to instrument through Headphones
- Play Tracks via Bluetooth or 1/8" aux input
- Built-in Metronome
- BPM (Beats Per Minute), Time Signature, Beat Division, and Accent Note options
Specs
- Power:
- 9v 300mA Minimum
- Center Negative, 2.1mm center pin, 5.5mm barrel
- Audio Input Connectors:
- Two Unbalanced 1/4"
- Impedance: 1M Ohm
- Frequency Response: 20hz To 20kh
- Auxiliary Input:
- One TRS Stereo 1/8"
- Impedance: 100k Ohm
- Audio Output Connectors:
- Two Unbalanced 1/4"
- Impedance: 220 Ohm
- Frequency Response: 20hz To 20khz
- Snr: 1vrms @ 1khz = 85db
- Thd+N: 8vpp @ 1khz = 0.006%
- Headphone Output:
- One TRS Stereo
- Impedance: 16 Ohm
- Frequency Response: 20hz To 20khz
- Snr: 1vrms @ 1khz = 85db
- Thd+N: 1vpp @ 1khz = 0.02%
- MIDI:
- 1x MIDI Trs Type A Input
- 1x MIDI Trs Type A Thru
- Bluetooth Information:
- Bluetooth Version 4.2
- Uses A2DP Protocol for Audio over Bluetooth
- Antenna: PCB Monopole
- Includes FFCID: 2AC7Z-ESP32WROOM32U
- 9v 300mA Minimum
- Center Negative, 2.1mm center pin, 5.5mm barrel
- Audio Input Connectors:
- Two Unbalanced 1/4"
- Impedance: 1M Ohm
- Frequency Response: 20hz To 20kh
- Auxiliary Input:
- One TRS Stereo 1/8"
- Impedance: 100k Ohm
- Audio Output Connectors:
- Two Unbalanced 1/4"
- Impedance: 220 Ohm
- Frequency Response: 20hz To 20khz
- Snr: 1vrms @ 1khz = 85db
- Thd+N: 8vpp @ 1khz = 0.006%
- Headphone Output:
- One TRS Stereo
- Impedance: 16 Ohm
- Frequency Response: 20hz To 20khz
- Snr: 1vrms @ 1khz = 85db
- Thd+N: 1vpp @ 1khz = 0.02%
- MIDI:
- 1x MIDI Trs Type A Input
- 1x MIDI Trs Type A Thru
- Bluetooth Information:
- Bluetooth Version 4.2
- Uses A2DP Protocol for Audio over Bluetooth
- Antenna: PCB Monopole
- Includes FFCID: 2AC7Z-ESP32WROOM32U
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 0.98 lbs
- Shipping Dimensions: 6 x 4 x 3 in
- Manufacturer Part Number (MPN): 900-1091
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 405-295-7847
Email: customerservice@walrusaudio.com
Web: https://www.walrusaudio.com/pages/contact
Phone: 405-295-7847
Email: customerservice@walrusaudio.com
Web: https://www.walrusaudio.com/pages/contact
New
$249.99
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.