Peavey PV115 2-Way Passive, Unpowered PA Speaker (1x15")

An outstanding value from Peavey, the PV115 PA enclosure is loaded with a tough 15" woofer and horn, and handles 400 watts program, 800 watts peak power. Unpowered. Requires separate power amplifier.

When you're ready to upgrade your PA system, nobody blends quality and value like Peavey. The PV115 loudspeaker is built like a tank and delivers a smooth response, filling your venue with clear and deep sound.

Wide Frequency Range

As front-of-house mains, Peavey PV115s offer two-way performance across the full audio spectrum. They're capable of delivering a wide frequency range, from a low 46 Hz all the way up to 21 kHz, for bomb-dropping bass, glassy highs, and everything in between with accuracy and presence. Where some loudspeakers only give you low-end boominess, the Peavey PV115's single 15-inch woofer reproduces lows and low-mids with punch and definition, so your audience will be able to lock in with the beat.. Once the crowd is feeling the groove, they'll be ready to experience the full effect of the melody. Every instrument in the band can sit in its own zone in the mix, adding texture and detail to your music.

Natural High-End Response

High frequencies are pushed through Peavey's RX14 compression driver. The 1.4-inch titanium diaphragm in the PV115 produces natural, airy top-end to complement the tight rumble of the bass frequencies. Vocals are crisp and clear, and guitars and keyboards cut through the mix with precision. The RX14 has onboard overload protection to protect the tweeter from harm. This speaker is coupled with a 40 x 60-degree constant-directivity horn to disperse the highs throughout the room. Peavey's 2.8 kHz crossover sends each frequency to read more the most efficient speaker for creamy smoothness across the entire midrange spectrum.

High-Volume Power Rating

Paired with a power amplifier or powered mixer, Peavey PV115 loudspeakers push out up to 118 dB SPL (sound pressure level). Rated at 400 watts RMS with 800-watt peaks, you can fill any venue with music. The tweeter horn's vertical orientation helps disperse sound widely even when the enclosures are set on the floor, and an integrated pole-socket is perfect for stand-mounting up high. The trapezoidal cabinet can also be tilted on its side for use as a floor monitor. Two 1/4-inch connections on each cabinet make for easy integration into any PA rig. Run them straight from your power source as mains or monitors, or daisy-chain multiple units to increase the coverage area.

Rugged, Tour-Worthy Construction

Working bands are constantly setting up and breaking down their PA systems. Night after night, city after city, it's an endless cycle of packing and unpacking. Seesawing temperatures and rough treatment will take its toll on all but the hardiest gear. Peavey enclosures are strong and rigid enough to stand up to the harshest road abuse. Heavy-duty carpet covers the cabinet, protecting the wood from scrapes and dings. A beefy metal grille spans the entire front baffle, shielding both the woofer and the tweeter from damage. It is powder-coated in black to keep a professional appearance, no matter how many times you drag it out of the van. Steel caps protect the corners, and thick steel handles make setup and transport a snap. Yet with all its ruggedness, the PV 115 speaker only weighs 53 pounds.


- 2-way trapezoidal sound reinforcement enclosures
- 15" premium woofer with 2-3/8" voice coil
- RX14 compression driver with a 1.4" titanium diaphragm 1" exit
- 90 x 40 degrees constant-directivity horn
- Tweeter protection
- Heavy-duty crossover
- Molded-in pole mounts
- Heavy-duty metal grille

Note: Unpowered speaker, requires separate power amplifier.
WARNING: Cancer and Reproductive Harm -
read less

- Frequency Response: 56 Hz to 20 kHz (-10 dB point on LF)
- Sensitivity: 96 dB (2.83V)
- Power handling: 200 RMS, 400 program, and 800 peak
- Pole Socket Size: 1-3/8" (35 mm)
- Dimensions (HxWxD): 31.75 x 18.38 front) x 14.25 inches
- Impedance: 8 ohms
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 53 lbs
Shipping Dimensions: 34 x 21 x 18 in
Manufacturer Part Number (MPN): 00572150
with Speaker Stand
Shipping Weight: 61.25 lbs
Shipping Weight: 106 lbs

Note: Unpowered speaker, requires separate power amplifier.

For support or warranty questions, please contact the manufacturer:
Phone: 877-732-8391

Peavey PV115 Passive Speaker

Peavey proudly introduces some additions to its long-running PV Series, including mixers, equalizers, crossovers, loudspeakers and cables.


- 2-way trapezoidal sound reinforcement enclosures
- 15 in. premium, 2-3/8 in. voice coil woofer
- RX14 compression driver with a 1.4 in. titanium diaphragm 1 in. exit
- 90 degrees x 40 degrees constant directivity horn
- Tweeter protection
- Heavy-duty crossover
- Molded-in pole mounts
- Heavy-duty metal grille

Note: Unpowered speaker, requires separate power amplifier.

Reviewers gave this product an overall rating of 5 out of 5 stars. (88 ratings)
Submitted June 5, 2011 by a customer from
"Pleasantly surprised!"
Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
Excellent, clear, smooth, solid sound throughout its entire frequency range! One of best musical equipment purchases I have made in 45 yrs of doing this sort of thing!
I have to say I was amazed at how well these speakers sound! Had recently used a pair of Yamaha S115 club speakers, all other equipment was the same as is used with the Peavey's: amp, mixer, etc, but the Peavey PV115 sounded much better to me. Bought a blemished pair where both cost less than one of the Yamaha. And Yamaha was what I was shopping for.
only has 1/4" connections
Ease of Use
Plug n play.
even as a blemished set, they look and sound new to me.
Musical Background:
Active Musician
Musical Style:
Almost any style
41 of 42 people (98%) people found this review helpful. Did you?
Thanks for your opinion!


  • 8 x
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to