Greer Amps Black Tiger Delay Device Pedal

zZounds Gear Experts Say...
A vintage-inspired delay with an analog signal path, Greer Amps' Black Tiger takes 3 vintage delay types and packs them into one potent stompbox.
Overview
The Black Tiger features an analog signal path, with a digital delay repeater circuit.
"The Black Tiger is rad. Best non-analog, analog sounding delay I've ever played. The decay on it is perfect. It's warm, but then gets grainy as it trails off, like a good analog delay." --J. Murty
"Such a wicked sounding delay! A truly 3D experience!" Lance Seymour (Geartalk)
You asked for it Greer Amps went to work it's wonderful.
The Black Tiger Delay Device is an amazing delay pedal. What would happen if you took the sound of two vintage tape delays, and sprinkled in a bit of sound from a vintage oil-can delay? Well you'd be in delay heaven, or at least Greer Amps thinks so. So, that's what Greer Amps did! After countless requests for a Greer Amps delay, Greer Amps have finally answered the call. Greer Amps took the time to engineer this delay to have the sound and feel of those vintage delays, with some added touch sensitivity. The front end of the Black Tiger is structured in a way that lets the nuances of your playing come through. If you're looking for a delay that has the warmth of vintage studio equipment, with some slight grain on the repeats, then look no further. The Black Tiger is the answer.
- Controls:
- Feedbackadjusts the number of repeats. When set at or above the dot on the faceplate, the pedal will go into self-oscillation mode. The pedal WILL self oscillate when in bypass mode, and as the repeats build, they get louder, so be careful about leaving the feedback control… read more at or above the dot when in bypass mode.
- Mixadjusts the level of delayed signal.
- Timeadjusts the time between delay repeats.
- Bypass Switchtrue bypass footswitch.
- Trails Switchallows existing delayed signal to continue trailing off (useful for long delay settings), without any new input being delayed. Trails mode should not be used for long-term bypass*. The Trails mode is used to avoid a sudden "chop" of delay signal when bypassing the delay, if it is engaged while the pedal is in true bypass mode, no repeats will be generated.
- Vintage tape and oil can voicing!
- High quality analog buffers!
- Warm, analog tone, with slight grit on longer delay repeats!
- True Bypass!
- Uses 9-Volt battery or standard neg. center, 2.1mm power supply.
- Built with top quality components
- 5 year warranty to the original owner!
read less
"The Black Tiger is rad. Best non-analog, analog sounding delay I've ever played. The decay on it is perfect. It's warm, but then gets grainy as it trails off, like a good analog delay." --J. Murty
"Such a wicked sounding delay! A truly 3D experience!" Lance Seymour (Geartalk)
You asked for it Greer Amps went to work it's wonderful.
The Black Tiger Delay Device is an amazing delay pedal. What would happen if you took the sound of two vintage tape delays, and sprinkled in a bit of sound from a vintage oil-can delay? Well you'd be in delay heaven, or at least Greer Amps thinks so. So, that's what Greer Amps did! After countless requests for a Greer Amps delay, Greer Amps have finally answered the call. Greer Amps took the time to engineer this delay to have the sound and feel of those vintage delays, with some added touch sensitivity. The front end of the Black Tiger is structured in a way that lets the nuances of your playing come through. If you're looking for a delay that has the warmth of vintage studio equipment, with some slight grain on the repeats, then look no further. The Black Tiger is the answer.
- Controls:
- Feedbackadjusts the number of repeats. When set at or above the dot on the faceplate, the pedal will go into self-oscillation mode. The pedal WILL self oscillate when in bypass mode, and as the repeats build, they get louder, so be careful about leaving the feedback control… read more at or above the dot when in bypass mode.
- Mixadjusts the level of delayed signal.
- Timeadjusts the time between delay repeats.
- Bypass Switchtrue bypass footswitch.
- Trails Switchallows existing delayed signal to continue trailing off (useful for long delay settings), without any new input being delayed. Trails mode should not be used for long-term bypass*. The Trails mode is used to avoid a sudden "chop" of delay signal when bypassing the delay, if it is engaged while the pedal is in true bypass mode, no repeats will be generated.
Features
- Touch sensitive front end, analog signal path, digital delay repeater.- Vintage tape and oil can voicing!
- High quality analog buffers!
- Warm, analog tone, with slight grit on longer delay repeats!
- True Bypass!
- Uses 9-Volt battery or standard neg. center, 2.1mm power supply.
- Built with top quality components
- 5 year warranty to the original owner!
Specs
- Enclosure Dimensions (in): 4.77" x 2.6" x 1.39"
- Power: 9 volt neg. center pin ONLY.
- Current draw: 35mA.
- Power: 9 volt neg. center pin ONLY.
- Current draw: 35mA.
- Dimensions and Weight in Packaging
- Open Box (Like New)
- Shipping Weight: 1 lbs
- Shipping Dimensions: 6 x 4 x 3 in
- Manufacturer Part Number (MPN): BLACK TIGER
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Email: GREERAMPSINFO@GMAIL.COM
Web: https://www.greeramps.com/pages/contact-us
Email: GREERAMPSINFO@GMAIL.COM
Web: https://www.greeramps.com/pages/contact-us
Open Box (Like New)
What is Open Box (Like New)?
$172.95
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.