Electro-Voice Q1212 Power Amplifier (1200 Watts)

No longer available at zZounds
zZounds Gear Experts Say...
Play hard with the remarkable muscle of this ElectroVoice powered amp. Join it with the Phoenix, Tour X or Zx3/Zx5 systems to enhance low-end response.

With 2 x 1200 W @ 4 Ohms and 2 x 1800 W @ 2 Ohms, the ElectroVoice Q1212 offers the horsepower to challenge the legendary P3000. It provides the same power from a 2 RU chassis at modest weight, making it a perfect subwoofer or high-power top drive for Phoenix, Tour X and Zx3/Zx5 systems or system combinations.

Specifications
Maximum Input Voltage: +21 dBu (8.69 Vrms)

Amplifier Gain (dB): 32 dB

Continuous rated power (1k Hz, THD 1%) 2Ohm: 1800 Watts

Continuous rated power (1k Hz, THD 1%) 4Ohm: 1200 Watts

Input Impedance (balanced): 20 kOhm

Continuous rated power (1k Hz, THD 1%) 8Ohm: 750 Watts

Continuous rated power
(20-20k Hz, THD<0,2%) 4 Ohm: 1100 Watts
Continuous rated power

(20-20k Hz, THD<0,2%) 8 Ohm: 550 Watts

Maximum bridged output 4 Ohm: 3600 Watts

Maximum bridged output 8 Ohm: 2400 Watts

Frequency Response: 10 Hz...40 kHz

Slew Rate: > 30 V / us

Mains Voltage: 100 V, 120 V, 230 V or 240 V; 50-60 Hz (factory configured)

Cooling: Front-to-rear, 3-stage fans

Electronics Type: Amplifier

Network Control (IRIS-Net): No

Intermodulation Distortion (SMTPE): < 0.1 %

DIM 30: < 0.05 %

Signal-to-noise ratio (A-weighted): > 110 dB

Input Sensitivity: +6.6 dBu

Weight Net: 17.7 kg ( 39.02 lbs )

Dimensions (HxWxD): 88.1 x 483 x 421.5 mm (3.47 x 19.02 x 16.59 in.)

Output at 8 ohms stereo: 750 watts per channel

For support or warranty questions, please contact the manufacturer:
Phone: 800-289-0096
Email: technical.support@us.bosch.com
Web: https://electrovoice.com/contact-us/

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer