zZounds Tour Pro Portable PA System
No longer available at zZounds



zZounds Gear Experts Say...
Includes: Powered mixer, monitor amplifier, 2 PA speakers, 2 stage monitor speakers, 2 speaker stands, 4 speaker cables, 4 mics, 4 mic cables, 1 monitor cable, and 4 mic stands.
Overview
Save money and hassle with this expertly-configured, bargain-priced PA package! We've done all the hard thinking for you--matching great-sounding speakers with powered mixers that have the right wattage to drive the speakers properly; choosing great, durable live sound mics; and selecting all the cables and stands you'll need to get everything connected and ready to use! This system takes it up a notch and includes proper monitors and amps to run them so that you can hear more of you in the mix.
Includes:
1 x Behringer PMP5000 20-Channel Powered Mixer (1200 Watts)
1 x Behringer EP2000 Power Amplifier (*Monitor Amplifier)
2 x Yamaha S115V Club V Loudspeaker (500 Watts, 1x15 in.)
2 x Yamaha SM12V Club V Loudspeaker Monitors (*400 Watts, 1x12 in.)
2 x OnStage SS7761B Tripod Speaker Stand
4 x Shure SM58 Dynamic Handheld Microphone (Total of 3 with Plus Package)
4 x CBI LowZ Microphone Cable (20 Foot)
4 x OnStage 7701B Tripod/Boom Microphone Stand
4 x Stagg Speakon to Speakon Speaker Cable
1 x CBI BL2A 1/4 TRS To 1/4 TRS Cable (20 Foot) (*For Monitor Use)
Plus Package includes:
1 x Shure PG24/PG58 Wireless Vocal System (upgrade substitute for 1 handheld mic)
1 x CBI BL2A 1/4 in. 6 Foot TRS-TRS Cable (Upgrade substitute for 1 mic cable)
1 x Rhythm Tech Wireless Microphone Stand Clip
NOTE: Only New, Plus Package option includes Wireless System, extra TRS Cable, and Wireless Mic Clip.
Behringer PMP5000 20-Channel Powered Mixer
The PMP5000 powered mixer delivers more… read more power, better sound at less weight!
The PMP5000 mixer delivers 1,200 Watts of massive power and incredible performance through new-generation amplifier technology, crystal-clear sound plus an ultra-compact and lightweight design. 24-bit stereo FX processors, IMP mic preamps, Voice Canceler and more round off this impressive package of power features.
Get massive power and great sound in a lightweight package!
Features:
Ultra-compact 2 x 600-Watt stereo powered mixer (1,200 Watt bridged mode)
Revolutionary amplifier technology: enormous power, incredible sonic performance and super-light weight
Ultra-compact design at nearly half the weight of conventional powered mixers means no more lugging around dead weight
20-channel mixer section features 12 mono and 4 stereo channels plus separate tape returns
2 studio-grade 24-bit stereo FX processors with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
12 high-quality IMP "Invisible" Mic Preamps with switchable +48 V phantom power for condenser microphones
Effective, extremely musical 3-band EQ, switchable Low cut filter and Clip LEDs on all mono channels
Stereo 7-band graphic EQ allows precise frequency correction of monitor or main outputs
Voice Canceller function removes singer's voice from recordings for Karaoke applications
Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
Standby switch mutes all mic input channels during breaks while background music is provided via tape inputs
Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
Adjustable stereo CD/Tape input for connecting external line sources
Multi-functional stereo Preamp outputs for added flexibility
Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Yamaha S115V Club V Loudspeaker (500 Watts, 1x15 in.)
Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.
Features
15 in. cast frame woofer
Dual Speakon and 1/4 in. connectors
2 in. pure titanium diaphragm
90 x 45 degree CD horn
Excellent for high-level music and vocals.
New cabinet tunings yield improved low frequency performance, and newly developed transducers allow higher power capacities for use with larger amplifiers. An improved, constant-directivity horn was also developed to further enhance high frequency dispersion and response. Durable steel input panels contain both dual 1/4 in. and dual Neutrik Speakon connectors.
The new Club V loudspeakers continue to offer performance and selection normally only available at substantially higher prices. These rugged, carpet covered cabinets feature heavy gauge, arced steel grilles and steel corner protectors.
On-Stage SS7761B Tripod Speaker Stands
An extremely versatile speaker stand, this reversible-shaft design may be used with either 1-3/8 in. or 1-1/2 in. speaker cabinet mounts. Includes the added safety of a locking shaft pin to prevent accidental speaker slippage.
Shure SM58 Dynamic Handheld Microphone
Consistently the first choice of performers around the globe, the SM58 vocal microphone is a genuine world standard and a true audio legend. The Shure SM58 is a unidirectional (cardioid) dynamic vocal microphone designed for professional vocal use in sound reinforcement and studio recording.
A highly effective, built-in, spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SM58 has a tailored vocal response for a sound that is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently. Outdoors or indoors, singing or speech -- the SM58 is the overwhelming choice of professionals worldwide.
On-Stage 7701B Tripod/Boom Microphone Stands
Height adjustable mic stand comes with a durable tripod base and foldable legs for easy storage.
Features:
Solid cast end with standard 5/8-27 threads
Long 30 in. boom with molded plastic counterweight
Euro-Style boom with separate clutches for length and angle of boom. Allows user to make one-handed adjustments of boom angle while performing
Professional quality die-cast zinc clutch locks vertical shaft at any height from 36 - 63 in.
Clip-on cable holder
Steel-reinforced plastic leg housing offers less weight and exceptional strength
Folding legs with plastic endcaps for durability and reduced floor vibration. Base spread: 23 in
Monitor Section
Behringer EP2000 Power Amplifier
Protected by an impact resistant, all-steel 2U rackmount chassis, the Behringer EP2000 Stereo Power Amplifier comes with ATR (Accelerated Transient Response) Technology.
The EP2000 delivers precise power, signal and clip LEDs to monitor performance. For reliable operation, independent DC and thermal overload protection on each channel, a back-to-front ventilation system, high-current toroidal transformer and power transistors have been added. With rugged construction and high-quality components, this amp ensures a long life of amazing sound.
Features
2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
Precise Power, Signal and Clip LEDs to monitor performance
XLR and 1/4 inch TRS input connectors for compatibility with any source
Professional speaker connectors and touch-proof binding posts support most speaker wiring systems
Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
Independent limiters per channel offer reliable protection against overload and distortion
High-current toroidal transformer for ultra-high transient response and absolute reliability
Ultra-reliable Toshiba/Fairchild power transistors
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
Back-to-front ventilation system including air filter for reliable operation
Built-like-a-tank, impact-resistant, all-steel 2U rackmount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Yamaha SM12V Club V Loudspeaker Stage Monitor
Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.
Features:
12 in. 2-way floor monitor
Dual Speakon and 1/4 in. connectors
Low-profile design
Great as a vocal monitor
New cabinet tunings yield improved low frequency performance, and newly developed transducers allow higher power capacities for use with larger amplifiers. An improved, constant-directivity horn was also developed to further enhance high frequency dispersion and response. Durable steel input panels contain both dual 1/4 in. and dual Neutrik Speakon(TM) connectors.
The new Club V loudspeakers continue to offer performance and selection normally only available at substantially higher prices. These rugged, carpet covered cabinets feature heavy gauge, arced steel grilles and steel corner protectors.
Info for Plus Package version only:
Shure PG24/PG58 Wireless Vocal System
A comprehensive first step into professional wireless, Performance Gear Wireless Systems are engineered to the same uncompromising quality standards as PGX, SLX, ULX and UHF-R wireless. Marrying superior sound quality and stage-proven endurance with advanced features like Internal Antenna Diversity and frequency selectability, Performance Gear Wireless fulfills the promise of independent, confident performance in freedom from the wire.
Features:
Reliable wireless performance
Up to 8 compatible systems (across multiple bands)
Shure's patented Predictive Diversity ensures continuous reception
Confident, portable setup
Internal Antenna
First in the industry
Internal 1/4 wave antennas minimize poor positioning and breakage
Durable construction
Superior sound quality
Variable companding ratio for clear sound
80 years of microphone expertise read less
Includes:
1 x Behringer PMP5000 20-Channel Powered Mixer (1200 Watts)
1 x Behringer EP2000 Power Amplifier (*Monitor Amplifier)
2 x Yamaha S115V Club V Loudspeaker (500 Watts, 1x15 in.)
2 x Yamaha SM12V Club V Loudspeaker Monitors (*400 Watts, 1x12 in.)
2 x OnStage SS7761B Tripod Speaker Stand
4 x Shure SM58 Dynamic Handheld Microphone (Total of 3 with Plus Package)
4 x CBI LowZ Microphone Cable (20 Foot)
4 x OnStage 7701B Tripod/Boom Microphone Stand
4 x Stagg Speakon to Speakon Speaker Cable
1 x CBI BL2A 1/4 TRS To 1/4 TRS Cable (20 Foot) (*For Monitor Use)
Plus Package includes:
1 x Shure PG24/PG58 Wireless Vocal System (upgrade substitute for 1 handheld mic)
1 x CBI BL2A 1/4 in. 6 Foot TRS-TRS Cable (Upgrade substitute for 1 mic cable)
1 x Rhythm Tech Wireless Microphone Stand Clip
NOTE: Only New, Plus Package option includes Wireless System, extra TRS Cable, and Wireless Mic Clip.
Behringer PMP5000 20-Channel Powered Mixer
The PMP5000 powered mixer delivers more… read more power, better sound at less weight!
The PMP5000 mixer delivers 1,200 Watts of massive power and incredible performance through new-generation amplifier technology, crystal-clear sound plus an ultra-compact and lightweight design. 24-bit stereo FX processors, IMP mic preamps, Voice Canceler and more round off this impressive package of power features.
Get massive power and great sound in a lightweight package!
Features:
Ultra-compact 2 x 600-Watt stereo powered mixer (1,200 Watt bridged mode)
Revolutionary amplifier technology: enormous power, incredible sonic performance and super-light weight
Ultra-compact design at nearly half the weight of conventional powered mixers means no more lugging around dead weight
20-channel mixer section features 12 mono and 4 stereo channels plus separate tape returns
2 studio-grade 24-bit stereo FX processors with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
12 high-quality IMP "Invisible" Mic Preamps with switchable +48 V phantom power for condenser microphones
Effective, extremely musical 3-band EQ, switchable Low cut filter and Clip LEDs on all mono channels
Stereo 7-band graphic EQ allows precise frequency correction of monitor or main outputs
Voice Canceller function removes singer's voice from recordings for Karaoke applications
Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
Standby switch mutes all mic input channels during breaks while background music is provided via tape inputs
Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
Adjustable stereo CD/Tape input for connecting external line sources
Multi-functional stereo Preamp outputs for added flexibility
Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Yamaha S115V Club V Loudspeaker (500 Watts, 1x15 in.)
Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.
Features
15 in. cast frame woofer
Dual Speakon and 1/4 in. connectors
2 in. pure titanium diaphragm
90 x 45 degree CD horn
Excellent for high-level music and vocals.
New cabinet tunings yield improved low frequency performance, and newly developed transducers allow higher power capacities for use with larger amplifiers. An improved, constant-directivity horn was also developed to further enhance high frequency dispersion and response. Durable steel input panels contain both dual 1/4 in. and dual Neutrik Speakon connectors.
The new Club V loudspeakers continue to offer performance and selection normally only available at substantially higher prices. These rugged, carpet covered cabinets feature heavy gauge, arced steel grilles and steel corner protectors.
On-Stage SS7761B Tripod Speaker Stands
An extremely versatile speaker stand, this reversible-shaft design may be used with either 1-3/8 in. or 1-1/2 in. speaker cabinet mounts. Includes the added safety of a locking shaft pin to prevent accidental speaker slippage.
Shure SM58 Dynamic Handheld Microphone
Consistently the first choice of performers around the globe, the SM58 vocal microphone is a genuine world standard and a true audio legend. The Shure SM58 is a unidirectional (cardioid) dynamic vocal microphone designed for professional vocal use in sound reinforcement and studio recording.
A highly effective, built-in, spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SM58 has a tailored vocal response for a sound that is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently. Outdoors or indoors, singing or speech -- the SM58 is the overwhelming choice of professionals worldwide.
On-Stage 7701B Tripod/Boom Microphone Stands
Height adjustable mic stand comes with a durable tripod base and foldable legs for easy storage.
Features:
Solid cast end with standard 5/8-27 threads
Long 30 in. boom with molded plastic counterweight
Euro-Style boom with separate clutches for length and angle of boom. Allows user to make one-handed adjustments of boom angle while performing
Professional quality die-cast zinc clutch locks vertical shaft at any height from 36 - 63 in.
Clip-on cable holder
Steel-reinforced plastic leg housing offers less weight and exceptional strength
Folding legs with plastic endcaps for durability and reduced floor vibration. Base spread: 23 in
Monitor Section
Behringer EP2000 Power Amplifier
Protected by an impact resistant, all-steel 2U rackmount chassis, the Behringer EP2000 Stereo Power Amplifier comes with ATR (Accelerated Transient Response) Technology.
The EP2000 delivers precise power, signal and clip LEDs to monitor performance. For reliable operation, independent DC and thermal overload protection on each channel, a back-to-front ventilation system, high-current toroidal transformer and power transistors have been added. With rugged construction and high-quality components, this amp ensures a long life of amazing sound.
Features
2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
Precise Power, Signal and Clip LEDs to monitor performance
XLR and 1/4 inch TRS input connectors for compatibility with any source
Professional speaker connectors and touch-proof binding posts support most speaker wiring systems
Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
Independent limiters per channel offer reliable protection against overload and distortion
High-current toroidal transformer for ultra-high transient response and absolute reliability
Ultra-reliable Toshiba/Fairchild power transistors
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
Back-to-front ventilation system including air filter for reliable operation
Built-like-a-tank, impact-resistant, all-steel 2U rackmount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Yamaha SM12V Club V Loudspeaker Stage Monitor
Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.
Features:
12 in. 2-way floor monitor
Dual Speakon and 1/4 in. connectors
Low-profile design
Great as a vocal monitor
New cabinet tunings yield improved low frequency performance, and newly developed transducers allow higher power capacities for use with larger amplifiers. An improved, constant-directivity horn was also developed to further enhance high frequency dispersion and response. Durable steel input panels contain both dual 1/4 in. and dual Neutrik Speakon(TM) connectors.
The new Club V loudspeakers continue to offer performance and selection normally only available at substantially higher prices. These rugged, carpet covered cabinets feature heavy gauge, arced steel grilles and steel corner protectors.
Info for Plus Package version only:
Shure PG24/PG58 Wireless Vocal System
A comprehensive first step into professional wireless, Performance Gear Wireless Systems are engineered to the same uncompromising quality standards as PGX, SLX, ULX and UHF-R wireless. Marrying superior sound quality and stage-proven endurance with advanced features like Internal Antenna Diversity and frequency selectability, Performance Gear Wireless fulfills the promise of independent, confident performance in freedom from the wire.
Features:
Reliable wireless performance
Up to 8 compatible systems (across multiple bands)
Shure's patented Predictive Diversity ensures continuous reception
Confident, portable setup
Internal Antenna
First in the industry
Internal 1/4 wave antennas minimize poor positioning and breakage
Durable construction
Superior sound quality
Variable companding ratio for clear sound
80 years of microphone expertise read less
Specs
Behringer PMP5000 Specs
Microphone Inputs:
- Type: XLR, electronically balanced, discrete input circuit
- Frequency Response: <10 Hz-155 kHz (-1 dB), <10Hz- >200 kHz (-3 dB)
- Gain: +10 dB, +60 dB
- Max Input Level: +12 dBu @ +10 dB gain
- Impedance: approx. 2.6 k ohms balanced/ 1.3 k ohms unbalanced
- Signal-to-Noise Ratio: 109 dB/ 112 dB A-weighted (0 dBu IN @ +10 dB gain)
- Distortion (THD+N): 0.002% / 0.0018% A-weighted
Mono Line Inputs
- Type: 1/4 in. TS connectors, balanced
- Impedance: approx 20k ohms
- Max Input Level: +21 dBu
Stereo Line Inputs
- Type: 1/4 in. TRS connectors, unbalanced
- Impedance: >3.6k ohms
- Max Input Level: +22 dBu
Equalizer
- Low: 80 Hz / +/- 15 dB
- Mid: 100 Hz - 8 kHz / +/- 15 dB
- High: 12 kHz / +/- 15 dB
CD/Tape Input
- Type: RCA
- Impedance: approx 3.6 k ohms, balanced
- Max Input Level: +21 dBu
Main Preamp Outputs:
- Type: 1/4 in. TRS connectors, unbalanced
- Impedance: approx 150 k ohms, unbalanced
- Max Input Level: +21 dBu
Monitor Preamp Outputs:
- Type: 1/4 in. TRS connectors, unbalanced
- Impedance: approx 150 k, unbalanced
- Max Input Level: +21 dBu
Stereo Outputs:
- Type: 1/4 in. TRS connectors, unbalanced
- Impedance: approx 150 ohms, unbalanced
- Max Output Level: +21 dBu
Stereo Outputs:
- Type: RCA
- Impedance: approx 1k ohms
- Max Output Level: +21 dBu
Loudspeaker Outputs:
- Type: compatible to Neutrik Speakon
Load Impedance:
- Main L/R: 4-8 ohms
- Monitor/Main Mono: 4-8 ohms
- Main Mono/Main Mono: 4-8 ohms
- Bridge: 8-16 ohms
DSP:
- Converter: 24-bit Delta-Sigma, 64/128-times oversampling
- Dynamics D/A: 90 dB
- Sampling Rate: 46.875 kHz
- Delay Time: max 5s
- Signal Run Time (Line in>>Line out): approx 1.5 ms
Display:
- Type: 2 Dual 7-Segment LED
Amplifier (Power Amp Output):
- Power @ 4 ohms: 2 x 450 w
- Power @ 8 ohms: 2 x 215 w
- Power @ 8 ohms (Bridge): 1 x 1200 w
Power Supply:
- Mains Voltage: 230V~, 50 Hz
- Power Consumption: 1000 w
- Fuse: T 6,3 A H 250V
- Mains Connector: Standard IEC receptacle
Physical/Weight:
- Dimensions: 4.875 x 23.5 x 19.5 in.
- Weight: 28.665 lbs
Behringer EP2000 Power Amplifier Specs
Output Power: 20 Hz-20kHz @ 0.1% THD, both channels driven:
- 8 ohms: 350 w
- 4 ohms: 500 w
- 2 ohms: 650 w (1 kHz @ 0.1% THD, both channels driven
Bridged Mono: 1 kHz, 0.1% THD
- 8 ohms: 1000 w
- 4 ohms: 1300 w
Distortion: <0.01%
Frequency Response: 20 Hz – 20 kHz, +0/-1dB
Damping Factor: >300 @ 8 ohms
Noise (unweighted, 20Hz to 20kHz): -100 dB
Voltage Gain: 40 x (32 dB)
Input Sensitivity, V RMS (@ 8 ohms): 1.15 V (+3.4 dBu)
Input Impedance: 10k ohms (unbalanced), 20k ohms (balanced)
Controls:
- Front: Power switch, gain control (channels 1 and 2)
- Rear: DIP switches (10x)
Indicators:
- Power: green LED
- Clip: red LED, 1 per channel
- Signal: yellow LED, 1 per channel
Connectors:
- Inputs: Balanced XLR and ¼ inch TRS
- Outputs: Touch-Proof binding posts and Neutrik Speakon
Cooling: Continuously variable speed fan, back-to-front air flow
Amplifier Protection: Full short circuit, open circuit, thermal and HF protection
Load Protection: Turn-on/off muting, AC coupling
Output Circuit Types: Class AB complementary linear output
Power Supply: USA/Canada 120 V. 60 Hz
Mains connector: Standard IEC receptacle
Dimensions (HxWxD): approx. 3.5 x 19 x 15.8 inches
Weight: 34.6 lbs.
Yamaha S115V Club V Loudspeaker Specs
Woofer: 15 in.
Tweeter (diaphragm): 2 in. titanium
Frequency response (-10dB): 55Hz - 16kHz
Power handling (noise/program/peak): 250/500/1000 watts
Sensitivity: 99dB
Dimensions (approximate): 19 x 28 x 15 in.
Weight (approx.): 60.5 lbs.
Yamaha SM12V Club V Loudspeaker (Stage Monitor) Specs
Woofer: 12 in.
Tweeter (diaphragm): 2 in. titanium
Frequency Response (-10dB): 60Hz - 16kHz
Power Handling (noise/program/peak): 200/400/800 watts
Sensitivity: 97dB
Dimensions (approximate): 25 x 16 x 14 in.
Weight (approx.): 43 lbs.
Enclosure Covering: Carpet
Shure SM58 Dynamic Mic Specs
Type: Dynamic (moving coil)
Frequency Response: 50 to 15,000 Hz
Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency Output Level (at 1,000 Hz)
Open Circuit Voltage: -74.5 dB* (0.19 mV)
Power Level: -56.0 dB**
Impedance: Rated impedance is 150 (300 actual) for connection to microphone inputs rated low impedance
Polarity: Positive pressure on diaphragm produces positive voltage on
pin 2 with respect to pin 3
Connector: 3-pin professional audio connector (male XLR type)
Case: Dark gray, enamel-painted, die cast metal; matte-finished,
silver colored, spherical steel mesh grille
Overall Dimensions: 51 x 162 x 23mm (2 x 6-3/8 x 29/32 in.)
Swivel Adapter: Positive-action, break-resistant, adjustable through 180 degrees, with standard 5/8 in.-27 thread
Net Weight: 298 g (10.5 oz.)
*0 dB = 1 v/ bar
**0 dB = 1 mw/10 bar
Info for Plus Package only:
Shure PG24/PG58 Wireless Vocal System
System Specs
Working Range: 75m (250 ft.) Note: actual range depends on RF signal absorption, reflection, and interference.
Audio Channel Response: Minimum: 45 Hz. Maximum: 15 kHz (overall system channel depends on microphone element).
Total Harmonic Distortion: 0.5%, typical Ref. +/- 33 kHz deviation, 1 kHz tone
Dynamic Range: >100 dB A-weighted, typical
Operating Temperature Range: -18C (0F) to +57C (+135F) Note: battery characteristics may limit this range
Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
PG2 Handheld Transmitter
Audio Input Level: +2 dBV maximum at -10dB position -8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 10 mW typical (dependent on applicable country regulations)
Dimensions: 223.52 L x 53.34 Dia. (8.8 in. x 2.10 in.)
Weight: 218 grams (7.7 oz.) without battery
Housing: Molded ABS handle and battery cup
Power Requirements: One 9V alkaline or rechargeable battery
Battery Life: >8 hours (alkaline)
Microphone Inputs:
- Type: XLR, electronically balanced, discrete input circuit
- Frequency Response: <10 Hz-155 kHz (-1 dB), <10Hz- >200 kHz (-3 dB)
- Gain: +10 dB, +60 dB
- Max Input Level: +12 dBu @ +10 dB gain
- Impedance: approx. 2.6 k ohms balanced/ 1.3 k ohms unbalanced
- Signal-to-Noise Ratio: 109 dB/ 112 dB A-weighted (0 dBu IN @ +10 dB gain)
- Distortion (THD+N): 0.002% / 0.0018% A-weighted
Mono Line Inputs
- Type: 1/4 in. TS connectors, balanced
- Impedance: approx 20k ohms
- Max Input Level: +21 dBu
Stereo Line Inputs
- Type: 1/4 in. TRS connectors, unbalanced
- Impedance: >3.6k ohms
- Max Input Level: +22 dBu
Equalizer
- Low: 80 Hz / +/- 15 dB
- Mid: 100 Hz - 8 kHz / +/- 15 dB
- High: 12 kHz / +/- 15 dB
CD/Tape Input
- Type: RCA
- Impedance: approx 3.6 k ohms, balanced
- Max Input Level: +21 dBu
Main Preamp Outputs:
- Type: 1/4 in. TRS connectors, unbalanced
- Impedance: approx 150 k ohms, unbalanced
- Max Input Level: +21 dBu
Monitor Preamp Outputs:
- Type: 1/4 in. TRS connectors, unbalanced
- Impedance: approx 150 k, unbalanced
- Max Input Level: +21 dBu
Stereo Outputs:
- Type: 1/4 in. TRS connectors, unbalanced
- Impedance: approx 150 ohms, unbalanced
- Max Output Level: +21 dBu
Stereo Outputs:
- Type: RCA
- Impedance: approx 1k ohms
- Max Output Level: +21 dBu
Loudspeaker Outputs:
- Type: compatible to Neutrik Speakon
Load Impedance:
- Main L/R: 4-8 ohms
- Monitor/Main Mono: 4-8 ohms
- Main Mono/Main Mono: 4-8 ohms
- Bridge: 8-16 ohms
DSP:
- Converter: 24-bit Delta-Sigma, 64/128-times oversampling
- Dynamics D/A: 90 dB
- Sampling Rate: 46.875 kHz
- Delay Time: max 5s
- Signal Run Time (Line in>>Line out): approx 1.5 ms
Display:
- Type: 2 Dual 7-Segment LED
Amplifier (Power Amp Output):
- Power @ 4 ohms: 2 x 450 w
- Power @ 8 ohms: 2 x 215 w
- Power @ 8 ohms (Bridge): 1 x 1200 w
Power Supply:
- Mains Voltage: 230V~, 50 Hz
- Power Consumption: 1000 w
- Fuse: T 6,3 A H 250V
- Mains Connector: Standard IEC receptacle
Physical/Weight:
- Dimensions: 4.875 x 23.5 x 19.5 in.
- Weight: 28.665 lbs
Behringer EP2000 Power Amplifier Specs
Output Power: 20 Hz-20kHz @ 0.1% THD, both channels driven:
- 8 ohms: 350 w
- 4 ohms: 500 w
- 2 ohms: 650 w (1 kHz @ 0.1% THD, both channels driven
Bridged Mono: 1 kHz, 0.1% THD
- 8 ohms: 1000 w
- 4 ohms: 1300 w
Distortion: <0.01%
Frequency Response: 20 Hz – 20 kHz, +0/-1dB
Damping Factor: >300 @ 8 ohms
Noise (unweighted, 20Hz to 20kHz): -100 dB
Voltage Gain: 40 x (32 dB)
Input Sensitivity, V RMS (@ 8 ohms): 1.15 V (+3.4 dBu)
Input Impedance: 10k ohms (unbalanced), 20k ohms (balanced)
Controls:
- Front: Power switch, gain control (channels 1 and 2)
- Rear: DIP switches (10x)
Indicators:
- Power: green LED
- Clip: red LED, 1 per channel
- Signal: yellow LED, 1 per channel
Connectors:
- Inputs: Balanced XLR and ¼ inch TRS
- Outputs: Touch-Proof binding posts and Neutrik Speakon
Cooling: Continuously variable speed fan, back-to-front air flow
Amplifier Protection: Full short circuit, open circuit, thermal and HF protection
Load Protection: Turn-on/off muting, AC coupling
Output Circuit Types: Class AB complementary linear output
Power Supply: USA/Canada 120 V. 60 Hz
Mains connector: Standard IEC receptacle
Dimensions (HxWxD): approx. 3.5 x 19 x 15.8 inches
Weight: 34.6 lbs.
Yamaha S115V Club V Loudspeaker Specs
Woofer: 15 in.
Tweeter (diaphragm): 2 in. titanium
Frequency response (-10dB): 55Hz - 16kHz
Power handling (noise/program/peak): 250/500/1000 watts
Sensitivity: 99dB
Dimensions (approximate): 19 x 28 x 15 in.
Weight (approx.): 60.5 lbs.
Yamaha SM12V Club V Loudspeaker (Stage Monitor) Specs
Woofer: 12 in.
Tweeter (diaphragm): 2 in. titanium
Frequency Response (-10dB): 60Hz - 16kHz
Power Handling (noise/program/peak): 200/400/800 watts
Sensitivity: 97dB
Dimensions (approximate): 25 x 16 x 14 in.
Weight (approx.): 43 lbs.
Enclosure Covering: Carpet
Shure SM58 Dynamic Mic Specs
Type: Dynamic (moving coil)
Frequency Response: 50 to 15,000 Hz
Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency Output Level (at 1,000 Hz)
Open Circuit Voltage: -74.5 dB* (0.19 mV)
Power Level: -56.0 dB**
Impedance: Rated impedance is 150 (300 actual) for connection to microphone inputs rated low impedance
Polarity: Positive pressure on diaphragm produces positive voltage on
pin 2 with respect to pin 3
Connector: 3-pin professional audio connector (male XLR type)
Case: Dark gray, enamel-painted, die cast metal; matte-finished,
silver colored, spherical steel mesh grille
Overall Dimensions: 51 x 162 x 23mm (2 x 6-3/8 x 29/32 in.)
Swivel Adapter: Positive-action, break-resistant, adjustable through 180 degrees, with standard 5/8 in.-27 thread
Net Weight: 298 g (10.5 oz.)
*0 dB = 1 v/ bar
**0 dB = 1 mw/10 bar
Info for Plus Package only:
Shure PG24/PG58 Wireless Vocal System
System Specs
Working Range: 75m (250 ft.) Note: actual range depends on RF signal absorption, reflection, and interference.
Audio Channel Response: Minimum: 45 Hz. Maximum: 15 kHz (overall system channel depends on microphone element).
Total Harmonic Distortion: 0.5%, typical Ref. +/- 33 kHz deviation, 1 kHz tone
Dynamic Range: >100 dB A-weighted, typical
Operating Temperature Range: -18C (0F) to +57C (+135F) Note: battery characteristics may limit this range
Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
PG2 Handheld Transmitter
Audio Input Level: +2 dBV maximum at -10dB position -8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 10 mW typical (dependent on applicable country regulations)
Dimensions: 223.52 L x 53.34 Dia. (8.8 in. x 2.10 in.)
Weight: 218 grams (7.7 oz.) without battery
Housing: Molded ABS handle and battery cup
Power Requirements: One 9V alkaline or rechargeable battery
Battery Life: >8 hours (alkaline)
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.