Shure P2R Wireless Bodypack Receiver for PSM200

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Shure P2R Wireless Bodypack Receiver for PSM200, Main
Shure P2R Wireless Bodypack Receiver for PSM200, Main
zZounds Gear Experts Say...
The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time.

The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.

Features
- Operates as a wired or wireless bodypack, or both simultaneously

- Other Features: Frequency locator, Built-in headphone limiter, Integrated cable management, High-impact plastic chassis, 1/4-inch Line input jack with high/low gain switch

- Operating Controls: Volume knob, Frequency select

- LED Indicators: Power, RF reception, Frequency, Limiter, Low battery

RF Sensitivity: -109 dBm typical Squelch Threshold -102 dBm typical Antenna Attached Whip Audio Input Connector

Connector Type: 1/4-inch Mono Impedance: 1 megohm Maximum Input Level: LO = +0 dBu; HI = 10 dBu Frequency Response: 30 Hz to 20 kHz (+/-3 dB); earphone dependent

Power Requirements: 9 V alkaline battery, Duracell(R) type MN1604 recommended

Battery Life: Volume Dependent

Wired (RF Off): 6 hours Wireless (RF On): 4 hours

Audio Output Connector: 1/8 inch (3.5 mm)

Minimum Load Impedance: 8 ohms

Net Weight: 100 g (3.52 oz.), less battery

Overall Dimensions 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer