Shure ULXD1 Digital Wireless Bodypack Transmitter

Shure ULXD1 Digital Wireless Bodypack Transmitter, G50, Rear

Shure ULXD1 Digital Wireless Bodypack Transmitter, G50, Side

Shure ULXD1 Digital Wireless Bodypack Transmitter, G50, Side 2

Shure ULXD1 Digital Wireless Bodypack Transmitter, G50, Top

zZounds Gear Experts Say...

Get crystal-clear 24-bit/48 kHz digital audio and reliable UHF transmission with the ULXD1, a bodypack transmitter for Shure's ULX-D digital wireless family.

Overview

The ULXD1 is a wireless bodypack transmitter compatible with Shure ULX-D Digital Wireless Systems. With a rugged yet lightweight aluminum case, the ULXD1 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options for professional sound reinforcement applications.

Features:

- 20 Hz to 20 kHz range with flat frequency response (actual response is microphone dependent)
- AES 256-bit encryption-enabled for applications where secure transmission is needed
- Interchangeable Shure microphone cartridges, including the legendary SM58
- >120 dB dynamic range
- 1, 10, and 20 mW selectable RF output power
- 5 segment battery fuel gauge
- Shure lithium-ion rechargeable battery pack provides up to 12 hours of battery life, precision metering, and zero memory effect
- Up to 11 hours continuous use with 2 x AA batteries
- Backlit LCD with easy to navigate menu and controls
- 100 meter (300 ft) operating range
- Rugged metal construction
- Frequency and power lockout

Specs

- Gain Offset Range: 0 to 21 dB (in 3 dB steps)
- Battery Type: Shure SB900 Rechargeable Li-Ion or AA batteries
- Battery Runtime @ 10 mW: Shure SB900: >12 hours, Alkaline: 11 hours
- Dimensions: 86 mm x 66 mm x 23 mm (3.4 in. x 2.6 in. x 0.9 in.) H x W x D
- Weight: 142 g (5.0 oz.), without batteries
- Housing: Cast aluminum
- Audio Input: Connector 4-Pin male mini connector (TA4M), See drawing for details
- Configuration: Unbalanced
- Impedance: 1 MO
- Maximum Input Level:
1 kHz at 1% THD
Pad Off: 8.5 dBV (7.5 Vpp)
Pad On: 20.5 dBV (30 Vpp)
- Preamplifier Equivalent Input Noise (EIN):
System Gain Setting = +20
120 dBV, A-weighted, typical
- RF Output Connector: SMA
- Antenna Type: 1/4 wave
- Impedance: 50 O
- Occupied Bandwidth: <200 kHz
- Modulation Type: Shure Proprietary Digital
- Power: 1 mW, 10 mW, 20 mW

Dimensions and Weight in Packaging
G50: Shipping Weight: 0.7 lbs; Shipping Dimensions: 13 x 5 x 4 in; Manufacturer Part Number (MPN): ULXD1=-G50
H50: Shipping Weight: 0.75 lbs; Shipping Dimensions: 13 x 5 x 4 in; Manufacturer Part Number (MPN): ULXD1=-H50
J50: Shipping Weight: 0.89 lbs; Shipping Dimensions: 13 x 5 x 4 in; Manufacturer Part Number (MPN): ULXD1=-J50A
V50: Shipping Weight: 0.89 lbs; Shipping Dimensions: 13 x 5 x 4 in; Manufacturer Part Number (MPN): ULXD1=-V50

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.