Shure Beta 56A Instrument Microphone
![Shure Beta 56A Instrument Microphone, New, Main](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/site_img_us_pro_beta56a_l_clipped-637c6639c4f76c10a3dbf4d05197c3a9.jpg)
Reject all unwanted noise to capture only your music with the tailored frequency response of the Shure Beta 56A.
Overview
The Shure Beta 56A microphone has a frequency response specifically tailored for drums and instruments. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.
A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutter
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Minimally affected by varying load impedance
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Legendary Shure quality and reliability
A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
Features:
- Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutter
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Minimally affected by varying load impedance
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Legendary Shure quality and reliability
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
Specifications
- Type: Dynamic (moving coil)
- Frequency Response: 50 to 16,000 Hz
- Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
- Output Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa (2.8 mV), (1 Pa = 94 dB SPL)
- Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Connector: Three-pin professional audio connector (male XLR type)
- Case: Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille
- Adjustable, Locking Stand Adapter: Integral, dynamic locking, adjustable through 180 degrees with standard 5/8 in.-27 thread
- Net Weight: 468 grams (16.7 oz)
- Type: Dynamic (moving coil)
- Frequency Response: 50 to 16,000 Hz
- Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
- Output Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa (2.8 mV), (1 Pa = 94 dB SPL)
- Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Connector: Three-pin professional audio connector (male XLR type)
- Case: Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille
- Adjustable, Locking Stand Adapter: Integral, dynamic locking, adjustable through 180 degrees with standard 5/8 in.-27 thread
- Net Weight: 468 grams (16.7 oz)
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 2 lbs
- Shipping Dimensions: 10 x 5 x 4 in
- Manufacturer Part Number (MPN): SHU BETA56A
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Phone: 800-516-2525
Email: service@shure.com
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(3 ratings)
Submitted May 27, 2024 by Ross D in Columbus, OH
"Great for drummer vocal"
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
As 50 year sound engineer this is the only choice for drummer vocal mic. Low profile, out of the way, great off axis rejection
Musical Background:
Audio engineer/occasional drummer
Musical Style:
Whatever $
Did you find this review helpful?
Thanks for your opinion!
New
$169.00
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.