Seymour Duncan Multi-Source Wavelength Duo Steel String Guitar Pickup

zZounds Gear Experts Say...
Combining a condenser microphone and pickup system, this amplification system provides natural tones that blend the best of both worlds!
Overview
The Multi-Source combines the popular Wave-Length pickup system with a condenser microphone for versatility, flexibility, and the most natural sound possible from your acoustic guitar. The Multi-Source uses the Wave-Length unitary design, piezoelectric co-polymer under-saddle pickup coupled to an 18-volt, low-noise, high-input impedance preamp with twice the dynamic range of typical 9-volt systems. Two AA batteries power the 18-volt preamp. With 18 volts, your signal has more headroom so hard strumming or plucking won't distort into piezo quack as easily.
- Versatile, flexible, and the most natural sound possible from acoustic guitars
- Piezoelectric co-polymer under-saddle pickup coupled to an 18-volt, low-noise, high-input impedance preamp
- Available for both nylon-string and steel-string guitars
- Lightweight, low-profile knobs
- Copper shielding insures immunity to external noise fields
- Cable With 1/4 Stereo Endpin Jack
- Powered by 2 AA batteries
This system is available in both nylon-string and steel-string options. With the addition of the highly efficient miniature, omni-directional electret condenser microphone, you can amplify your acoustic guitar with startling clarity and accuracy. The mic is nestled in a special absorptive visco-elastic polymer shock mount for optimal isolation. Two lightweight, low-profile knobs allow for master volume and microphone volume. Dial the… read more microphone in to add just the right amount of air; dial it out to control feedback, if necessary. Speaking of feedback, the microphone channel has two stages of low frequency roll-off to combat any tendency towards low frequency feedback. Also, full coverage copper shielding on the pickup insures immunity to external noise fields. This system is quiet.
The installation instructions contain a stereo wiring option that allows you to separate the pickup and mic. With this option, the pickup gets sent to the Tip connection, and the mic get sent to the ring connection of the output jack for use with a two-channel preamp.
read less
Features:
- Combines popular Wave-Length pickup system with a condenser microphone- Versatile, flexible, and the most natural sound possible from acoustic guitars
- Piezoelectric co-polymer under-saddle pickup coupled to an 18-volt, low-noise, high-input impedance preamp
- Available for both nylon-string and steel-string guitars
- Lightweight, low-profile knobs
- Copper shielding insures immunity to external noise fields
- Cable With 1/4 Stereo Endpin Jack
- Powered by 2 AA batteries
This system is available in both nylon-string and steel-string options. With the addition of the highly efficient miniature, omni-directional electret condenser microphone, you can amplify your acoustic guitar with startling clarity and accuracy. The mic is nestled in a special absorptive visco-elastic polymer shock mount for optimal isolation. Two lightweight, low-profile knobs allow for master volume and microphone volume. Dial the… read more microphone in to add just the right amount of air; dial it out to control feedback, if necessary. Speaking of feedback, the microphone channel has two stages of low frequency roll-off to combat any tendency towards low frequency feedback. Also, full coverage copper shielding on the pickup insures immunity to external noise fields. This system is quiet.
The installation instructions contain a stereo wiring option that allows you to separate the pickup and mic. With this option, the pickup gets sent to the Tip connection, and the mic get sent to the ring connection of the output jack for use with a two-channel preamp.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 0.44 lbs
- Shipping Dimensions: 6 x 4 x 2 in
- Manufacturer Part Number (MPN): 12511-25B
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 805-964-9610
Email: support@seymourduncan.com
Web: https://seymourduncan.zendesk.com
Phone: 805-964-9610
Email: support@seymourduncan.com
Web: https://seymourduncan.zendesk.com
New
$209.00
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.