SE Electronics X1 S Microphone Studio Bundle with RF-X

Get set up to record at home with an SE Electronics X1 S condenser microphone, RF-X reflection filter, shock mount with integrated pop filter, and XLR cable.

Want an all-in-one recording kit that's tailor-made for capturing great vocals? Then check out the SE Electronics X1 S Studio Microphone Bundle. This affordable bundle of recording gear will hit home with home studio artists, as it includes everything you need to get started right out of the box: the X1 S large-diaphragm cardioid condenser microphone, the RF-X reflection filter, a shock mount and pop filter kit, and a microphone cable.

What You Need to Record Vocals and Acoustic Instruments

The SE Electronics X1 S microphone has a hand-built 1-inch capsule/diaphragm with a -10/-20 dB pad and 2 switchable low-cut filters, outfitted with acoustically damping black paint and black rubber. This versatile microphone's cardioid polar pattern, which rejects sounds from the sides and rear of the mic, makes it especially sweet on vocals, but equally nice on acoustic instruments such as guitar, strings, or percussion. With a frequency response of 20 Hz to 20 kHz, this large-diaphragm condenser helps you capture anything that's spoken, sung, or strummed.

Get Great Recordings in Any Room

SE Electronics' high-performance RF-X Reflexion Filter works hand in hand with the bundle's X1 S condenser mic, providing optimal recording conditions in less-than-ideal recording environments. For quick and easy setup on your microphone stand, the RF-X features a lightweight body and redesigned lightweight clamp assembly. Put the reflection filter behind the X1 S microphone to stop read more acoustic reflections in their tracks, and gain complete acoustic control over your vocal booth.

See how to set up your RF-X in this demo video:

See what makes sE Electronics' Reflexion Filters unique in this video:

Keep Plosives in Check

A pop filter significantly reduces popping sounds caused during regular speech, while also serving as a spit barrier between mouth and mic. Use the included pop filter to prevent clipping as well as prolong the life of the X1 S microphone. The included shock mount cradles the X1 S and further prevents noise and vibrations from affecting the sound of the mic.


- X1 S large-diaphragm cardioid condenser microphone plus accessories
- Ideal for capturing vocals and acoustic instruments
- Hand-made 1-inch capsule with a -10/-20 dB pad and 2 switchable low-cut filters
- Sports acoustically damping black paint and black rubber
- Lightweight SE Electronics RF-X Reflexion Filter reduces acoustic reflections
- Microphone shock mount reduces noise from the area surrounding the mic
- Pop filter keeps popping sounds and saliva from entering the microphone
- Includes a 3-meter XLR microphone cable

Bundle Includes:
- sE Electronics X1 S large-diaphragm cardioid condenser microphone
- sE Electronics RF-X Reflexion Filter
- Shock mount
- Pop filter
- 3-meter XLR microphone cable

NOTE: Microphone stand not included.
WARNING: Cancer and Reproductive Harm -
read less

Dimensions and Weight in Packaging
Base Item
Shipping Weight: 9 lbs
Shipping Dimensions: 19 x 17 x 8 in
Manufacturer Part Number (MPN): X1-S-STUDIO-BUNDLE-U

For support or warranty questions, please contact the manufacturer:
Phone: 512-847-5696

SE Electronics X1 S Studio Bundle R-FX

The X1 S Studio Bundle has an sE Electronics X1 S microphone, sE Isolation Pack (with pop shield and shock mount), and 3-meter mic cable, plus SE Electronics' simple and effective RF-X Reflexion Filter so you can record anywhere you want. If you're recording in a non-acoustically-treated space (bedrooms, closets, etc.), a Reflexion Filter helps keep your signal clean without the sound of your room around it.

With a hand-crafted and individually tuned custom 1" capsule, high-performance electronics, an all-metal chassis, -10dB and -20dB pads and two low-cut filters, the X1 S microphone has the sound and features you'd expect from a serious high-end studio mic, at only a fraction of the cost.

The included sE Electronics Isolation Pack gives you a quick-release shock mount with integrated, adjustable pop filter. The Isolation Pack is a great add-on for anyone looking to increase the versatility of their X1 Series or 2200a II Series mic. The integrated quick-release mechanism at the base of the shock mount makes it easy to insert or remove a mic. No screws, no hassle, just one twist to secure or release.

Made from metal (rather than delicate fabric), the pop filter can be vertically positioned to accommodate any of the above mics, or completely removed from the shock mount if desired. The Isolation Pack comes included with the X1 S Vocal Pack and X1 S Studio Bundle. Also includes a 3 meter microphone cable.

Bundle Includes:
- X1 S microphone
- RF-X Reflexion Filter
- sE Isolation Pack (with shock mount and pop shield)
- 3-meter mic cable

See how to set up your RF-X in this demo video:

Reviewers gave this product an overall rating of 5 out of 5 stars. (2 ratings)
Submitted January 7, 2020 by Lil Mikey King in Cincy, OH

"Awesome product"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
Very responsive, high quality studio or home studio gear. You will not beat this set up for the money!

Musical Background:


Musical Style:

8 of 8 people (100%) people found this review helpful. Did you?
Thanks for your opinion!


FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to