Rode SVMPR Stereo VideoMic Pro Condenser Microphone with Rycote Shockmount




zZounds Gear Experts Say...
Rode added a Rycote Lyre shockmount to their Stereo VideoMic Pro. Capture big, spacious stereo sound when shooting live music, outdoor environments and more.
Overview
Building on the success of the VideoMic Pro, which launched in early 2011 and quickly became the defacto standard for DSLR on-camera audio, and RODE's original Stereo VideoMic, the Rode Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.
Based around a matched pair of high sensitivity "cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
The Rode Stereo VideoMic Pro builds on the feature set of the VideoMic Pro, with an ergonomic form factor perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting… read more events.
Like the VideoMic Pro, the Rode Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
Get a rockin' introduction to the Rode Stero VideoMic Pro:
read less
Based around a matched pair of high sensitivity "cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
The Rode Stereo VideoMic Pro builds on the feature set of the VideoMic Pro, with an ergonomic form factor perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting… read more events.
Like the VideoMic Pro, the Rode Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
Get a rockin' introduction to the Rode Stero VideoMic Pro:
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter
- Capsule: 0.50"
- Polar Pattern: Cardioid
- Address Type: End
- Frequency Range: 40Hz - 20kHz
- Output Impedance: 200O
- Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KO load)
- Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted): 20dB-A
Power Options 9V Battery
- Weight: 115.00gm
- Dimensions (H x W x D): 130.00 x 66.00 x 108.00 mm
- Output: Minijack Output
- Warranty: 1 year with free extension to 10 years following registration
- Active Electronics: JFET impedance converter
- Capsule: 0.50"
- Polar Pattern: Cardioid
- Address Type: End
- Frequency Range: 40Hz - 20kHz
- Output Impedance: 200O
- Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KO load)
- Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted): 20dB-A
Power Options 9V Battery
- Weight: 115.00gm
- Dimensions (H x W x D): 130.00 x 66.00 x 108.00 mm
- Output: Minijack Output
- Warranty: 1 year with free extension to 10 years following registration
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 0.5 lbs
- Shipping Dimensions: 9 x 5 x 3 in
- Manufacturer Part Number (MPN): SVMPR
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 562-364-7400
Web: https://rode.com/en/support/contact
Phone: 562-364-7400
Web: https://rode.com/en/support/contact
New
$299.00
- 8 x$37.38
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.