Neumann M149 Tube Large-Diaphragm Studio Condenser Microphone

With the same K49 capsule from Neumann's U47 and M49 microphones, this multipattern tube condenser shines on vocals and anything else you put in front of it!

The Neumann M149 tube microphone is a variable large-diaphragm studio condenser. The K 49 capsule -- well-known from the legendary U 47 and M 49 microphones -- is followed by a tube functioning as an impedance converter. In contrast to earlier concepts -- utilizing a transformer -- the tube is complemented with a transformerless output circuit design. The M 149 Tube can thus feed long microphone cables without any coloration.

Two slide switches are located below the large, acoustically very open headgrille. The switch at the front allows selection one of nine directional patterns. The slide switch at the rear operates a seven-step high pass filter. It allows a very fine adjustment of the cut-off frequency.


There are nine polar patterns to choose from, making this microphone an ideal choice for a wide range of recording situations. As its ancestors, the M 149 Tube is a superb vocalist microphone, not only because of the capsule, but also due to its modern circuitry, characterized by extremely low noise level.

Acoustic Features

The M 149 Tube is addressed from the front, marked with the Neumann logo. Also on the front is the switch for the selection of the polar patterns. The capsule is mounted elastically inside the headgrille to eliminate structure borne noise. The surface below the capsule is shaped like a cone to disperse any reflected sound from the acoustic upper half space. This avoids any interference with the primary sound arriving at the read more capsule directly. A large headgrille surrounds the capsule. It is acoustically very open and therefore increases the sonic realism.

Polar patterns

The polar pattern switch selects one of nine directional patterns: omnidirectional, wide-angle-cardioid, cardioid, hypercardioid, figure-8, and one additional intermediate pattern between each major position.

Electrical Features

The circuit of the M 149 Tube microphone has been developed to exceed traditional designs. We have selected a modern tube (triode) and combined its exceptional transmission characteristics with the advantages of our proven transformerless output circuit. The aim was to provide a more controlled environment for the audio signal on its path from the capsule to the output section. The final stage is an integrated amplifier, especially designed for such applications. It features very low distortion (THD


A seven-position slide switch is located on the back of the microphone. It selects a high-pass filter, advancing in half-octave steps between 20 Hz and 160 Hz (-3dB). This filter is useful to suppress rumble from air-conditioning and in windy situations. In addition, the filter provides an effective tool to control the audio signal when the microphone is used at close distance and therefore proximity effect alters the program material.

Delivery Range

The specifically designed N 149 A power supply unit feeds the M 149 Tube through an 8-core cable. The output connector for the audio signal is a 3-pin XLR. The output signal is balanced.

The microphone comes as a set in an attractive aluminium case, together with the 8-core microphone connecting cable, the N 149 A power supply with plug-in mains unit, the EA 170 full elastic microphone suspension and a dust cover.


- Switchable tube microphone
- Transformerless circuitry
- High output level
- Pressure gradient transducer with the M 49 capsule
- Acoustically very open wire mesh cage
- Nine directional characteristics: omni, wide angle cardioid, cardioid, hypercardioid, figure 8, and one intermediate position each
- 7fold switchable low frequency roll-off


- M 149 Tube Microphone
- N 149 A Power supply incl. power cable
- KT 8 Connecting cable
- EA 170 Elastic suspension
- Aluminium case
- Dust cover
read less

- Acoustical operating principle: Pressure gradient transducer
- Directional pattern: Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8 plus one intermediate position each
- Frequency range: 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm: 34/47/62 mV/Pa1)
- Rated impedance: 50 ohms
- Rated load impedance: 1 kohms
- Equivalent noise level, CCIR2): 28/25/23 dB1)
- Equivalent noise level, A-weighted2): 16/13/11 dB-A1)
- Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL): 66/69/71 dB1)
- Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL): 78/81/83 dB1)
- Typical SPL (tube characteristic)3): K < 0,5 %: 120 dB, K < 5 %: 136 dB
- Maximum output voltage: 18 dBu
- Powering: Power supply N 149 A
- Matching connectors: Microphone DIN8F, Power supply XLR3F
- Weight: 730 g
- Diameter: 70 mm
- Length: 201 mm
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 7.5 lbs
Shipping Dimensions: 10 x 7 x 5 in
Manufacturer Part Number (MPN): 008399

For support or warranty questions, please contact the manufacturer:
Phone: 860-434-9190


  • 18 x
  • 12 Interest-Free Payments with zZounds
  • 8 Interest-Free Payments with zZounds
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to