Neumann KH 150 Powered Studio Monitor

Take the guesswork out of mixing with Neumann's 6.5" powered monitors. The KH 150 boasts a linear response from 39 Hz to 21 kHz, and XLR and S/PDIF inputs.

The KH 150 is a powerful bi-amplified studio monitor with reference-class performance. Its 6.5-inch woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.

What You Hear Is What You Get
The KH 150 follows the same philosophy as all Neumann studio monitors: highest linearity, lowest distortion, no coloration, and perfect adaptability to any acoustic environment. It allows you to hear every nuance of your tracks. Mixing becomes so much faster and easier, once the guesswork is over. And more creative, too: Sounds genius, but can I get away with that? Is that vocal bright or sibilant? Is it too much bass? The KH 150 will tell you. Honestly.

One Bigger
What differentiates the KH 150 from its smaller siblings is its deeper bass response down to 39 Hz. That's almost as low as the larger KH 310, thanks to the KH 150's novel 6.5" high-precision woofer in a carefully designed bass reflex cabinet. The KH 150 is thus ideally suited to urban music, EDM, film scoring, and all styles that require extended low end and/or elevated listening levels. Thanks to powerful amplifiers (145W/100W) and sophisticated protection limiters, no clarity is lost even at high SPLs. But, being a true universalist, the KH 150 works just as well for everything from rock to classical music, broadcast read more applications and voice-over work.

The KH 150 has an exceptionally linear frequency response from 39 Hz to 21 kHz (±3 dB). Not only that: It also linearizes the phase response! Which translates to clear mids with astonishing transparency as well as extreme accuracy in the time domain: precise impulse reproduction and finely resolved reverbs. This is made possible by DSP controlled electronics which allow for sophisticated crossovers avoiding the phase distortion caused by analog filters. The internal DSP also realizes new standards in tonal consistency. The KH 150 is made to extremely low tolerances of no more than ± 0.8 dB! And you can hear it, too: Stereo imaging is razor-sharp.

Ready for Your Room
Even the best loudspeaker only sounds as good as the acoustic environment allows. Neumann's Mathematically Modelled Dispersion waveguide guarantees a wide sweet spot and minimizes desk reflections. But the KH 150 goes much further: Its internal DSP allows for room calibration via Neumann's revolutionary Automatic Monitor Alignment. MA 1 (sold separately) makes sure your DSP powered monitors are optimally adapted to the character of your room and perfectly calibrated for your listening position. Even in acoustically treated rooms, this results in a huge improvement.

Tonal compatibility with other KH line studio monitors makes it possible to use the KH 150 in mixed setups e.g. in surround/immersive setups. For flexible connectivity the KH 150 features both analog and digital inputs.

Energy Efficient
Neumann engineers took great care to develop a patent pending amplifier technology which combines superior audio performance with the energy efficiency of Class D. Although the KH 150's amplifiers deliver up to 145 W to the 6.5" woofer and 100 W to the 1" tweeter, they only consume 17 W at idle. Auto-standby reduces power consumption to 0.3 W when the KH 150 has not been used for a while, but can be deactivated.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

Free field frequency response ±3 dB: 39 Hz - 20.4 kHz
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): <20 dB(A) SPL
Max. SPL calc. in half space at 3% THD at 1 m (averaged between 100 Hz and 6 kHz): 118.7 dB SPL
Acoustical Principle: Bass reflex, Ports at the front
Analog input(s): XLR, analog electronically balanced
Analog input impedance: 24k Ohms
Digital input(s): RCA (75 Ω) S/PDIF

Input gain control (sensitivity): 0 dB to -15 dB
Output level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL
Equalization Bass : 0; -2; -4; -6 dB
Equalization Low-Mid: 0; -2; -4; -6 dB
Equalization Treble: +1; 0; -1; -2 dB
Control: Local, Network
Crossover frequency: 1.7 kHz
FIR phase correction: Linear phase (105 Hz ... 16 kHz; +/- 45°)
Protection circuitry: Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers
Output power woofer amplifier (THD+N with limiter deactivated: 10%): 145 W
Output power tweeter amplifier (THD+N with limiter deactivated: 10%): 100 W
Woofer: 165 mm (6.5") with protecting metal grille
Tweeter: 25 mm (1") with protecting metal grille

Product dimensions (height x width x depth): 345 x 225 x 273 mm; 13.58" x 8.86" x 10.75"
Product weight: 8.0 kg (17 lbs 10 oz)
Dimensions and Weight in Packaging
Black, Single Speaker
Shipping Weight: 20.75 lbs
Shipping Dimensions: 19 x 16 x 12 in
Manufacturer Part Number (MPN): 509129
White, Single Speaker
Shipping Weight: 22.25 lbs
Shipping Dimensions: 19 x 16 x 12 in
Manufacturer Part Number (MPN): 509131
Black, AMBEO Immersive Bundle
Shipping Weight: 325.75 lbs

For support or warranty questions, please contact the manufacturer:
Phone: 860-598-7555
Web: https://www.neumann.com/en-en/contact/

Black, Single Speaker

$1,750.00
  • 18 x  
  • 12 x  
    $145.83 with zZounds
  • 8 x  
    $218.75 with zZounds
FREE -Day Shipping!
Get it  for
Get it (or get it with an order of ), if you order within
Shipping to
Save $2049! AMBEO Immersive Bundle was $23,049, now $21,000
  • For a limited time, save on Neumann AMBEO Immersive Bundles at zZounds. Hurry -- ends October 31!