Mesa/Boogie Mark IIC+ Tube Amplifier Head (75 Watts)

zZounds Gear Experts Say...

Running the gamut from pristine cleans to the dirtiest overdriven tones, this Mesa/Boogie Mark IIC+ head produces complex tones for the biggest stages.

Overview

The Mark IIC+ is pure "Vintage Boogie" and based on the original Mark II (now called the Mark II-A) design, the world's first "Dual Mode" amplifier containing independent performance modes dedicated to clean and overdrive sounds.

Watch as we demo the Mark IIC+ in our exclusive video:

The IIC+ model represents the 3rd generation of that gamechanging single channel/dual mode layout and includes all the refinements made to that original format over its nearly five influential years. It was also the last model in its family, as the subsequent model would contain three performance modes and be dubbed the MARK III.

The IIC+'s single row of controls is shared by its two modes (preamps), one for Rhythm (clean) and one for Lead (overdrive). Independent, though still interactive, sets of gain and volume controls help optimize each gain structure while shared Tone controls handle the broad stroke voicing. Finetuning of the sounds is accomplished by the PULL SHIFT voicing features - some Mode specific - fitted to the simple controls and further shaping via the on-board 5-Band Graphic EQ. Though the "Q" of the individual Bands (Slider Pot frequencies) is fairly wide around their Center Points, they provide a surprising degree of surgical-level sculpting quickly and musically.

The Rear Panel of the C+ provides the important features that keep this amp as relevant as ever 40 years after its initial run. Global PRESENCE and REVERB controls are centered for easy navigation from the Front… read more in stage environments. A series, buffered Effects Loop provides a seamless interface for your time-based processing. The Power Select switch at the far right (left from the Front) allows for your choice of the full 75 watts of "SIMUL-CLASS" power for richness, authority, and max headroom or "CLASS A" for 25 watts of reduced power and low end along with easier, smoother power clip at lower volumes. One 8 Ohm and two 4 Ohm Speaker Outputs provide for a wide array of cabinet impedance matching. And though not a compensated Direct Output for Consoles or Interfaces, a SLAVE tap off the speaker outputs captures the entire sound of the amp - preamp and power section - to produce a non-compensated feed for IR Readers or external processors that might even serve an era-appropriate "dry/wet/wet" rig.

Out of production for four decades, we welcome back this icon and celebrate its impact on the incredible guitar heroes and timeless recordings they made during one of rock guitar's biggest decades. The Mark IIC+ legacy is one we don't take lightly or for granted, and recreating it in today's world with today's available components and rigorous worldwide Compliance Regulations was no easy feat. However, we are just as proud and excited about this iteration as we were about the first one that was produced for less than two years, four decades ago.

If you seek to own a legend, don't want to chase vintage relics in who knows what condition, want the fiercest, most articulate, and nuanced Tone possible, don't really need the galaxy-wide versatility of our Mark VII, and prefer a more classic layout and look, the Mark IIC+ is waiting. Be warned, though, once you play a C+, you may never feel the same about other guitar amplifiers. A bold statement, to be sure, but it's backed up by 40 years of iconic Tone and the passionate faithful who've made it mythical.

Features:

- An authentic recreation of the legendary MESA/Boogie Mark IIC+ Head
- Footswitchable Dual Mode Preamp
- Selectable Simul-Class (75 Watts) or Class A (25 Watts) Power
- Built-in Footswitchable Tube-Driven Spring Reverb
- Footswitchable 5-Band Graphic EQ
- Slave Output for use with Wet/Dry/Wet rigs or external IR readers
- Series, Buffered Effects Loop

Specs

- Wattage: 75 or 25 Watts (Global)
- Power Tube Type: 4x Mesa 6L6 Power Tubes
- Channels & Modes: Single Channel/Dual Mode (RHYTHM & LEAD)
- Mode Voicings/Styles:
RHYTHM: Traditional Clean to Vintage Gain, Independent Volume 1 (Gain) with Pull Bright & Master 1 with Pull Deep Controls to set initial gain independent of playing volume
LEAD: Cascading High-Gain (Lead), Utilizes Volume 1 to set initial gain strength then features Independent Lead Drive (Gain) with Pull Lead (to manually channel switch) & Lead Master with Pull Deep Controls to adjust the level of cascading gain independent of the playing volume
- Channel Controls: Each Channel features Independent 2-Position Style Mode Switch, Gain, Treble, Mid, Bass, Presence, Reverb (back panel), Master & Multi-Soak Power Controls
- GRAPHIC EQ / REVERB / FX / SOLO: FX Loop/5 Band Graphic EQ/Reverb
- Footswitchable Functions: Modes, EQ, Reverb
- WEIGHT: 39 lbs | 17.69 kg
- Dimensions: 9 1/4" H X 18 3/4" W X 10 3/8" D / 23.49 cm H X 47.62 cm W X 26.23 cm D
- Amp Type: Tube
- Chassis Material: Steel
- Rectifier Type: Silicon Diodes
- Preamp Tubes: 5x 12AX7
- Power Amp Tubes: 4x 6L6
- Maintenance Free Fixed Bias: Yes
- Wattage(s) quick reference (see power amp details for more info): 75 or 25 Watts (Global)
- Power Amp Details (class & wattage): Exclusive Simul-Class- Power Amp - Provides the benefits of vintage Class-A and modern Class A/B running simultaneously
- Convection Or Fan Cooling: Fan Cooled
- Number Of Footswitchable Channels (or modes): Single Channel, Dual Mode
- Number Of Style Modes: 2
- Number Of Style Modes Per Channel: Single Channel, 2 Modes
- Channel Controls Rhythm/Lead Shared Controls: Volume 1 (sets initial gain strength for both channels), Treble, Bass, Middle, Assignable/Foot-Switchable 5-Band Graphic EQ, Reverb & Presence
- Graphic Eq And/Or Contour: 5-Band Graphic EQ
- Reverb / Effects & Bypass Options: EQ Bypass
- Effects Loop & Bypass Options: Tube-Driven, Series FX Loop
- Speaker Outputs: 1x 8 Ohm and 2x 4 Ohm
- Footswitch Two: 1x Single-Button Footswitch (Modes 1/2), 1x Two-Button Footswitch (Reverb/EQ)
- Slipcover Included: Fitted Slipcover
- Cabinet Material: Marine Grade, Baltic Birch
- Standard Finish Options (no extra cost): Black Bronco Vinyl, Black Nylon Grille, Black Rubber Handle with Chrome End Caps & Metal Corners

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 49.6 lbs; Shipping Dimensions: 23 x 16 x 14 in; Manufacturer Part Number (MPN): 2.MCP.AB
Blemished: Shipping Weight: 49.6 lbs; Shipping Dimensions: 23 x 16 x 14 in