Laney Black Country Customs IRT30-112 Guitar Combo Amplifier

Roll up to any show with the IRT30-112 for maximum tone from an ultra-portable combo. Three footswitchable channels allow for a complete sonic experience.

Overview

Handcrafted in the UK, the Black Country Customs IRT30-112 is a 30-Watt, super flexible, modern sounding 1 x 12" combo. Delivering lots of smooth, high gain guitar tones and packed full of top end features, the IRT30-112 is an extremely versatile, aggressive sounding unit, delivering plenty of low-end growl and punch. A tone Forged in Iron!

Features:

- Super flexible, modern sounding combo handcrafted in the UK
- Smooth, high gain, and aggressive guitar tones
- Full 3-channel pre-amp with clean, rhythm and lead channels
- Onboard digital Reverb
- 3-Band EQ with PULL/SHIFT function to precisely dial in the exact EQ
- Vari-Watts Knob to adjust wattage level without compromising tone
- Enhanced boost circuitry with footswitch control
- DI Out with switchable Cabinet Emulation

Featuring a full 3-channel pre-amp with clean, rhythm and lead channels, plus a footswitchable front end pre-boost feature. The IRT30-112 also features the ability to PULL/SHIFT the EQ controls allowing the player to get the exact EQ they are looking for. The BCC-IRT30-112 features a very useful vari-watts control, which allows you to get the tone you are after at any wattage level without compromising your amazing IRONHEART tone.

Enhanced boost circuitry on the UK built BCC-IRONHEARTS allows you to drive the amp hard without any of the muddiness and uncontrollable low end associated with lesser amps.

The BCC-IRT30-112 is fitted with an 8/16 Ohm extension speaker socket allowing you to match it… read more with whatever extension cabinet you choose. Along with a truly awesome sounding cabinet emulated DI out that allows you to connect you BCC-IRT30-112 directly to the PA removing the need to mic your cabinet and giving the engineer a great consistent sound every time. The source of the DI signal can be switched allowing you to can get a great recording sound using your favorite IR within your DAW. Combine these features with an effects loop with level switching plus an AUX in and you have a great sounding, super flexible high gain, all valve tone machine. The BCC-IRT30-112 can satisfy even the most demanding of tone conscious players.

Lovingly handcrafted in the UK workshop, the IRONHEARTs are Forged in Iron!

Specs

-Watts: 30 Watts RMS
-Preamp Tubes/Valves: ECC83
-Power Tubes: 6L6
-Speaker: 1 x 12" HH Custom driver
-Effects: Digital Reverb and Pre-Boost
-Inputs: 1/4" jack, 1/8" Aux In
-Outputs: XLR DI Out, 1/4" FX Loop i/o, 1/4" Extension Cab
-Weight: 25.6 kg
-Dimensions (HxWxL): 580mm x 680mm x 390mm

Dimensions and Weight in Packaging
1x12", 30 Watts: Shipping Weight: 56.5 lbs; Shipping Dimensions: 27 x 23 x 16 in; Manufacturer Part Number (MPN): BCC-IRT30-112

Documents and Manuals

For support or warranty questions, please contact the manufacturer:
Phone: 615-793-8787
Email: support@laney.co.uk

Reviews

(1 ratings)

Submitted April 21, 2024 by a customer from gmail.com

"Laney Black Country Customs IRT30-112 =Killer Amp"

Overall:

(see rating details)

Verified Customer zZounds has verified that this reviewer made a purchase from us.

Mine was delivered today, on a Sunday. It looked great, so I plugged it in via the 4 cable method via the FX loop and input with a Line 6 POD Go- (with NO amp sims, though, used only for effects). I connected my Mojotone 2x12" extension cabinet with Eminence Red Coat Tonkers as I usually do. I set all knobs to 12 o'clock for now. In a few minutes I got sound, and I was blown away. Clean channel-very nice, stepped on the boost pedal and it broke up nicely-very useful. Rhythm channel was dirtier as expected and the boost pedal added some more crunch-OK! The lead channel sounded great, but I turned up the gain to about 7.5 because I wanted more liquid and I got it. The Boost pedal added some more of what I liked and made it louder-OK again. There are a LOT of features and options on this amp. Adjustable dynamics, global tone control, digital reverb, watts control (sort of like an attenuator, but it doesn't come after the power section), cabinet-emulated XLR out, pull adjustments on all channel EQ's and more. Most importantly, it sounds really great and is plenty loud to gig with. Laney categorizes this as a 'bedroom' amp, which it can do by lowering the watts control, but I'm going to use it live with plenty of power to spare-even with 'watts' set to halfway. As stated, I use mine with effects using the four cable method and I don't use pedals of any kind before the input. I'm not sure how it would do with that, so check that out first. This is a HIGH gain amp with lots of bells… read more and whistles, and it delivered exactly what I needed (replacing my PRS Custom 20, which is healing in the shop). Two questions for Laney, though - (1) Where is my included IRONHEART guitar amp sim plugin by Aurora DSP? I filled out the registration online and I should have received the voucher via email automatically, like everyone does in 2024. (2) How many preamp tubes are in the IRT-30 112? The manual says (4) 12AX7 or ECC83's, but everywhere else I've searched says there are three preamp tubes. Who cares for now, though? The amp sounds killer and I can wait for the Laney people to come in on Monday and answer my email.

Did you find this review helpful?