Fuchs ODS Classic Dual Boost Guitar Amplifier Head (50 Watts)
With on-board Spin Semiconductor 16-bit digital reverb, the ODS Classic Dual Boost head delivers killer clean and overdriven tone, bathed in lush reverb.
$3,170.99
- Interest-Free Payment Plans
Fuchs ODS II Custom 2550 Guitar Amplifier Head (50 Watts)
No longer available at zZounds
zZounds Gear Experts Say...
This 50 watt head is about to become your main squeeze. The two-channel ODS II nails a variety of sounds, from sparkling clean to over-the-top saturated.
Overview
The Fuchs ODS II Custom 2550 Guitar Amplifier 50 watt Head captures all the tones that made the original Fuchs ODS amps legendary, but allows massive tonal flexibility via totally separate clean and overdrive channels, each with their own dedicated tone controls, mid and gain boosts, and master volumes.
Despite this tremendous range, the ODS-II is still an easy to operate amp. Channel one gives tones from California style cleans to Classic rock grind. Channel two covers all that channel one offers but with over-the-top near-shred levels of gain as well. The amp has a deep, lush digital reverb with level and decay controls, and a global master and accent control. The rear panel features dual FX loops, digital bias monitoring with external bias controls for each tube, and 5 speaker outputs. The ODS-II is built on a fan cooled, aircraft grade aluminum chassis which includes half power and hi/low/off fan switches. Available in all global voltages.
Embraced by players as diverse as Al Di Meola, Warren Haynes, Jimmy Herring, Jake Cinninger, Luther Dickinson to country artists like The Zac Brown Band's Coy Bowles, the ODS has truly become a classic product on the landscape of stages worldwide.
- Channel-II is a medium high gain channel with drive, level and tone controls for overdrive.
- Global master volume and global Accent control.
- Front panel mounted power off, standby and on.
- Studio grade… read more digital reverb based on Spin Technology 16-Bit processor with level and dwell controls.
- Dual FX Loops: One standard Fuchs style loop for pedal or line level devices and series or parallel options. One series only loop for insert of signal processors, volume controls. read less
Despite this tremendous range, the ODS-II is still an easy to operate amp. Channel one gives tones from California style cleans to Classic rock grind. Channel two covers all that channel one offers but with over-the-top near-shred levels of gain as well. The amp has a deep, lush digital reverb with level and decay controls, and a global master and accent control. The rear panel features dual FX loops, digital bias monitoring with external bias controls for each tube, and 5 speaker outputs. The ODS-II is built on a fan cooled, aircraft grade aluminum chassis which includes half power and hi/low/off fan switches. Available in all global voltages.
Embraced by players as diverse as Al Di Meola, Warren Haynes, Jimmy Herring, Jake Cinninger, Luther Dickinson to country artists like The Zac Brown Band's Coy Bowles, the ODS has truly become a classic product on the landscape of stages worldwide.
Features
- Channel one is a low-medium gain channel with dedicated master volume.- Channel-II is a medium high gain channel with drive, level and tone controls for overdrive.
- Global master volume and global Accent control.
- Front panel mounted power off, standby and on.
- Studio grade… read more digital reverb based on Spin Technology 16-Bit processor with level and dwell controls.
- Dual FX Loops: One standard Fuchs style loop for pedal or line level devices and series or parallel options. One series only loop for insert of signal processors, volume controls. read less
Specs
- Power Levels: 25/50, 50 and 100 Watts.
- Tube Compliment: 4 Premium 12AX7 Preamp / 2 or 4 Matched 6L6 Power Tubes.
- Tube Filaments: Regulated DC
- Fan: DC Operated
- Chassis Construction: All Aluminum
- Wiring: Mix of PCB and PTP
- Power Transformer, Output Transformer, and Choke: Custom Wound US Made
- Cooling: Fuchs Standard ODS "Through Chassis" Cooling via 90-MM DC fan (No hum induced).
- Controls: Input Gain (pull gain boost works independent of tone controls which remain working in boost mode), High (pull mid boost), Mid (pull mid boost frequency), 3-Position Brite Switch Two Frequencies Plus Off, Deep Switch (low frequency enhance), 3-Position EQ Switch (high gain rock mode), Low Gain Jazz Mode, Center Position Tone Stack Bypass.
- Rear panel: AC IEC inlet, AC and DC fuses, LCD Digital Bias display with external bias adjustments and rotary tube selector allowing independent bias adjustment and direct current readouts for each tube.
- Outputs: 4-ohm, 8-ohm, and 16 ohm
- Tube Compliment: 4 Premium 12AX7 Preamp / 2 or 4 Matched 6L6 Power Tubes.
- Tube Filaments: Regulated DC
- Fan: DC Operated
- Chassis Construction: All Aluminum
- Wiring: Mix of PCB and PTP
- Power Transformer, Output Transformer, and Choke: Custom Wound US Made
- Cooling: Fuchs Standard ODS "Through Chassis" Cooling via 90-MM DC fan (No hum induced).
- Controls: Input Gain (pull gain boost works independent of tone controls which remain working in boost mode), High (pull mid boost), Mid (pull mid boost frequency), 3-Position Brite Switch Two Frequencies Plus Off, Deep Switch (low frequency enhance), 3-Position EQ Switch (high gain rock mode), Low Gain Jazz Mode, Center Position Tone Stack Bypass.
- Rear panel: AC IEC inlet, AC and DC fuses, LCD Digital Bias display with external bias adjustments and rotary tube selector allowing independent bias adjustment and direct current readouts for each tube.
- Outputs: 4-ohm, 8-ohm, and 16 ohm
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 973-772-4420
Email: info@fuchsaudio.com
Web: https://fuchsaudiotechnology.com/contact-us/
Phone: 973-772-4420
Email: info@fuchsaudio.com
Web: https://fuchsaudiotechnology.com/contact-us/
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.