EarthQuaker Devices Blumes Bass Overdrive Pedal







zZounds Gear Experts Say...
A bass-flavored overdrive from the Akron tone wizards, EarthQuaker Devices' Blumes features a fully analog screamer overdrive circuit with soft clipping.
Overview
The Blumes is an overdrive effects pedal by EarthQuaker Devices based on the Plumes circuit that is ideal for bass players and all purveyors of low-end. While embodying the key characteristics and features of the Plumes, they went ahead and modified this circuit with double the gain and a deeper bass response to retain all the low end. At lower gain settings, you'll get all of the crunchy tone you love about the original, but once you get above noon on the Gain control, that's where the similarities stop.
This all-analog tri-mode overdrive with soft clipping carries the torch of the classic screamer circuit but has a voice all its own. And thanks to its +/- power supply it utilizes bipolar power, which gives you more dynamics, clarity, and all the headroom you could ever desire. The end result is a more three-dimensional tone with added clarity that really pushes a nice tube amp over the edge.
Watch and listen as Justin takes the EarthQuaker Devices Blumes for a ride in this head-spinning track:
And much like the Plumes, this pedal offers three different clipping options for your desired low end face melting needs.
- Deep bass response
- Twice as much gain as the Plumes
- Features 3 different clipping options: symmetrical LED, asymmetrical silicon, and no diode OpAmp drive
- Operates off internal bipolar power for more headroom and signal integrity
- All-analog signal path
- True bypass
- Silent relay-based… read more switching with Flexi-Switch Technology
- Lifetime warranty
read less
This all-analog tri-mode overdrive with soft clipping carries the torch of the classic screamer circuit but has a voice all its own. And thanks to its +/- power supply it utilizes bipolar power, which gives you more dynamics, clarity, and all the headroom you could ever desire. The end result is a more three-dimensional tone with added clarity that really pushes a nice tube amp over the edge.
Watch and listen as Justin takes the EarthQuaker Devices Blumes for a ride in this head-spinning track:
And much like the Plumes, this pedal offers three different clipping options for your desired low end face melting needs.
Features:
- Bass overdrive based on a modified Plumes- Deep bass response
- Twice as much gain as the Plumes
- Features 3 different clipping options: symmetrical LED, asymmetrical silicon, and no diode OpAmp drive
- Operates off internal bipolar power for more headroom and signal integrity
- All-analog signal path
- True bypass
- Silent relay-based… read more switching with Flexi-Switch Technology
- Lifetime warranty
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 0.74 lbs
- Shipping Dimensions: 6 x 3 x 3 in
- Manufacturer Part Number (MPN): EQDBLUMV1USA
Things To Know
EarthQuaker Devices Blumes Bass Overdrive Pedal
Updated May 28, 2025 14:00
by Pat Betzold
This is Patrick with zZounds, and I'm here with the EarthQuaker Blumes bass distortion pedal. Some things to know about this pedal here: this is very much the bass version of the Plumes distortion pedal. So if you're familiar with that one, you can see it’s got, you know, the same layout: level, tone, and gain, and then in the middle, you've got a clipping switch that changes, you know, what type of diodes you have in there. You can do LED clipping, silicon clipping, and an op-amp in there, and depending on which one you have selected, that gives your distortion a little bit of a different texture. On the one end, you have kind of a fuzzy sound; on the other side, you’ve got a little bit more cleaner boost kind of texture. In addition to that, it’s got additional low-end response as well as twice the gain as the Plumes. It’s a great pedal for just, you know, adding some distortion to your bass sound. You can cover a variety of tones, and it’s, you know, very useful. One thing to keep an eye out for is that that switch in the middle: when you change the clipping, that’s going to affect the level control here. The volume will change depending on which one you’ve got selected, so just keep an eye out for that. Compensate for that by turning the level down or up. There’s a lot of output on this and a lot of gain, so it’s a very useful pedal. That’s the EarthQuaker Blumes. Check it out at zZounds, and that’s it.

Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-252-9220
Email: info@earthquakerdevices.com
Web: https://www.earthquakerdevices.com
Phone: 330-252-9220
Email: info@earthquakerdevices.com
Web: https://www.earthquakerdevices.com
New
$119.00
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.