Eminence Kappa Pro LF Bass Speaker (10")

Eminence Kappa Pro LF Bass Speaker (10"), 8 Ohms, Side

Load your bass amp cab or PA subwoofers with these mighty 10" speakers. With a frequency range of 47 Hz - 2 kHz, the Eminence Kappa Pros deliver huge lows.

Overview

Eminence's Kappa Pro series reaches a lower low with the Kappa Pro 10LF, a low frequency enhanced version of their popular Kappa Pro 10. With the low frequency content of modern music demanding more from the low end than in the past, the Kappa Pro 10LF excels with its high-BL, strong twin-reinforced cone, and high excursion suspension. Its high power handling capability (600 watts continuous, 1200 watts music program power) and its parameter set allow it to work in very compact vented or horn loaded bass guitar or subwoofer enclosures.

Take an in-depth tour of the Eminence speaker factory:

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

- Nominal Basket Diameter: 10", 254 mm
- Nominal Impedance: 8 O
- Watts: 600 W
- Music Program: 1200 W
- Resonance: 39 Hz
- Usable Frequency Range: 47 Hz - 2 kHz
- Sensitivity: 91.6 dB
- Magnet Weight: 105 oz.
- Gap Height: 0.375", 9.5 mm
- Voice Coil Diameter: 3", 76 mm
- Resonant Frequency (fs): 39 Hz
- DC Resistance (Re): 5.47 O
- Coil Inductance (Le): 0.97m H
- Mechanical Q (Qms): 8.97
- Electromagnetic Q (Qes): 0.29
- Total Q (Qts): 0.28
- Compliance Equivalent Volume (Vas): 72.97 liters / 2.58 cu.ft.
- Peak Diaphragm Displacement Volume (Vd): 271.4 cc
- Mechanical Compliance of Suspension (Cms): 0.37 mm/N
- BL Product (BL): 14.46 T-M
- Diaphragm Mass Inc. Airload (MMs): 46 grams
- Efficiency Bandwidth Product (EBP): 132
- Maximum Linear Excursion (Xmax): 7.2 mm
- Surface Area of Cone (Sd): 376.9 cm2
- Maximum Mechanical Limit (Xlim): 16. mm
- Driver Volume Displaced: 0.067 cu.ft. / 1.9 liters
- Overall Diameter: 10.27", 260.9 mm
- Baffle Hole Diameter: 9.14", 232.2 mm
- Front Sealing Gasket: Yes
- Rear Sealing Gasket: Yes
- Mounting Holes Diameter: 0.28", 7.1mm
- Mounting Holes B.C.D.: 9.75", 247.7mm
- Depth: 5", 127 mm
- Net Weight: 17.2 lbs, 7.8 kg
- Shipping Weight: 18.35 lbs, 8.32 kgs
- Coil Construction: Aluminum voice coil
- Coil Former: Polyimide former
- Magnet Composition: Ferrite magnet
- Core Details: Vented and extended core
- Basket Materials: Die-cast aluminum basket
- Cone Composition: Treated paper cone
- Cone Edge Composition: Paper cone edge
- Dust Cap Composition: Treated Paper dust cap

Dimensions and Weight in Packaging
8 Ohms: Shipping Weight: 18 lbs; Shipping Dimensions: 12 x 12 x 6 in; Manufacturer Part Number (MPN): EMI KAPPAPRO10LF
Blemished, 8 Ohms: Shipping Weight: 18.25 lbs; Shipping Dimensions: 12 x 11 x 6 in; Manufacturer Part Number (MPN): MBP EMIKAPPAPRO10LF

Documents and Manuals

Eminence Warranty

For support or warranty questions, please contact the manufacturer:
Phone: 502-845-5622

Reviews

(2 ratings)

Submitted June 27, 2015 by kendall j in greensboro, NC

"Eminence Kappa Pro LF"

Overall:

(see rating details)

I bought this to replace an original 10" that was in a Euphonic Audio VL110 cabinet. My intent was to have the original 10" re-coned. After seeing the massive 105 oz. magnet on this bad boy it might never happen. Delivers punchy smooth tone. Needs a lot of horsepower! Rated at 600 watts 1200 peak!!! I use a Bugera Veyron 1001T rated 2000 watt @ 4ohm 1000 watts @ 8ohm and the Eminence just laughs!!

Musical Background:

Been at it on bass 38 years and hacking guitars 48 years

Musical Style:

60s, 70s, 80s,90s, 2000s!, gospel, rock , funk, blues ,R and B, country

6 of 6 people (100%) people found this review helpful. Did you?