Diamond Bass Comp/EQ Compressor Pedal
No longer available at zZounds




zZounds Gear Experts Say...
The sweet spot in your bass tone has been found. Diamond's bass compressor lets you dial in tilt EQ with an adjustable frequency center, plus a mids knob.
Overview
There's something truly magical about finding the compression sweetspot on bass. Enter the Diamond Bass COMP/EQ. This bad boy will go on your board, and never come off. This next-gen compressor maintains the classic circuit architecture while increasing range and functionality. Now armed with 3 Tilt frequencies and a +/- 10dB Mid control, the EQ section allows you to sculpt your tone in the same box that masters it.
Rather than mess with perfection, the Diamond Comp/EQ augments the original bass-tuned yellow box design with a Mids boost/cut control, 3-position Tilt Frequency switch, custom spec'd, US-made opto-isolators and modern, quiet switching.
Combining silky smooth, natural optical compression with Diamond's signature hi-fi inspired, centre-detent active tilt EQ and Mid boost/cut control, the Comp/EQ is a mastering solution for your effects chain -- one you might never turn off.
- Mids boost/cut control
- Made in Canada
- Top-mounted jacks
- Burr-Brown audio path
- Relay based true bypass
- 9-18VDC operation
- Space saving design, without any loss of quality
Rather than mess with perfection, the Diamond Comp/EQ augments the original bass-tuned yellow box design with a Mids boost/cut control, 3-position Tilt Frequency switch, custom spec'd, US-made opto-isolators and modern, quiet switching.
Combining silky smooth, natural optical compression with Diamond's signature hi-fi inspired, centre-detent active tilt EQ and Mid boost/cut control, the Comp/EQ is a mastering solution for your effects chain -- one you might never turn off.
Features:
- 3 Tilt frequencies and a +/- 10dB Mid control- Mids boost/cut control
- Made in Canada
- Top-mounted jacks
- Burr-Brown audio path
- Relay based true bypass
- 9-18VDC operation
- Space saving design, without any loss of quality
Specs
- Input Impedance: > 1MO
- Output Impedance: < 10KO
- Switching: Relay True Bypass
- Power Requirement: 9-18 VDC , negative tip, 2.1 mm barrel jack.
- Current Draw @ 9 VDC: 22mA
- Tilt EQ Fulcrum Frequency: 250 || 500 || 900 Hz +|- 6 dB
- Mid EQ Center Frequency: 800 Hz +|- 10 dB
- Dimensions: 122 x 66.98 x 39.64 mm (4.8 x 2.64 x 1.58")
- Weight: 280 g
- Output Impedance: < 10KO
- Switching: Relay True Bypass
- Power Requirement: 9-18 VDC , negative tip, 2.1 mm barrel jack.
- Current Draw @ 9 VDC: 22mA
- Tilt EQ Fulcrum Frequency: 250 || 500 || 900 Hz +|- 6 dB
- Mid EQ Center Frequency: 800 Hz +|- 10 dB
- Dimensions: 122 x 66.98 x 39.64 mm (4.8 x 2.64 x 1.58")
- Weight: 280 g
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.