BASSBOSS Sublim8 Column PA Speaker System

BASSBOSS Sublim8 Column PA Speaker System, Black, Action Position Back

zZounds Gear Experts Say...

Carry a big stick with the BASSBOSS Sublim8, a column PA system with massive output, stunning audio performance, and easy deployment.

Overview

The Sublim8 is a fully reimagined column; Deep, rich, crystal-clear, high output in a stealthy form factor that fits into any aesthetic and environment. This 3-way self-powered full-range column speaker system and subwoofer package delivers exceptional coverage and fidelity along with super high output in a compact, ready-to-roll unit.

The column section features dual 8" mid-ranges and a 3" voice coil, 1.4" throat compression driver on an isophasic wave guide. The integrated comprehensive DSP, 96kHz sampling rate, push button presets, and the BASSBOSS ControlBASS software application ensure ease of deployment, optimal sonic performance, and provides host of embedded features. The included wheel cart allows for efficient and streamlined transport.

Features:

- Deep, rich, crystal-clear audio
- 3-way powered full-range system
- 18" subwoofer
- Bi-amped, column-format top section
- Dual 8" mid-ranges & 3" voice coil
- 1.4" throat compression driver on an isophasic wave guide
- Compact ready to roll package
- 96kHz sampling rate
- Push button presets
- BASSBOSS ControlBASS software
- Included wheel cart

What's Included:
- Wheel cart
- Power cable
- Interconnect speaker cable
- Interconnect power cable
- Manual
- Warranty Card

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

Frequency Response: (+/-3 dB) 35-19,000Hz
Maximum Sustained SPL: 133dB SPL 1m Half Space (Preliminary)
Nominal Dispersion H* x V*: 120 x 20
Amplification: 4000W Class D, 3 channel: 2400W LF, 800W MF, 800W HF
Processing: Integrated comprehensive DSP, 96kHz sampling rate, 8 push button presets. Presets include high pass filters, low pass filters, phase alignment, equalization and multi-stage limiting. Storage capacity of up to 100 presets
Low Freq Transducer: 1 x 18" diameter (450mm) long-excursion Neodymium motor woofer with 4" (100mm voice coil and waterproof cone
Mid Freq Transducer: 2 x 8" diameter (200mm) Balanced Drive 8" Neodymium motor woofers with dual 2" (52mm) voice coils
High Freq: 1 x 3 in. (76mm) dia. diaphragm Neodymium motor compression driver passing through a 1.4" (35mm) exit throat into an isophasic wave guide
Enclosure Type:
- Subwoofer: Vented direct radiating, interlocking socket for upper sections
- Top: Vented Direct Radiating Midrange with Isophasic Wave Guide loaded HF section.
- Elevator: Support section featuring cable pathways and cable storage area
- Cabinet Construction: CNC machined 15 and 18mm Birch plywood with extensive bracing and dado joinery 2 M6 Eye Bolts to secure Elevated Light Fixtures. 6 integrated handles
- Exterior Finish Grille: High-pressure, bonded polyurea coating, waterproof, textured black or white Perforated, powder-coated steel
Dimensions (HxWxD):
- Assembled: 19" x 24" x 106"
- Sub Section: 19" x 24" x 36"
- Top Section & Elevator Section: 8.5" x 11.25" x 36"
Electrical Connector Mains:
- Neutrik powerCON True 1 Waterproof Connector
- USA 3-pin grounding 120V electrical plug: NEMA 5-15
Voltage Operating Range: 120V | 240V
Current Draw: 100-240V AC, 50-60Hz (Auto-sensing, auto switching universal supply) 5.4A (nominal) | 2.5A (nominal)
Signal Input Connector: XLR-F
Signal Output Connector: XLR-M (direct pass-through only)
Weight (Estimated):
- Subwoofer: 95 lbs.
- Elevator: 15 lbs.
- Top: 35 lbs.
- Cart: 30 lbs.
- Total: 175 lbs.