
Audio-Technica U853R Cardioid Condenser Hanging Microphone
Suspend Audio-Technica's U853R UniPoint microphone over choirs, instrumental groups, and theater stages to capture natural sound from any angle.
$229.00
- No Credit Check6 x$38.17
- No Credit Check4 x$57.25
Audio-Technica U853A Hanging Condenser Microphone
No longer available at zZounds

zZounds Gear Experts Say...
Capture natural sound from any angle with the U853A hanging mic from Audio-Technica.
Overview
Maintaining the Audio-Technica tradition of clear and transparent sound quality, the U853A cardioid condenser hanging microphone is ideal for speech, theater, orchestra and choir sound reinforcement and recording. The microphone's fast transient response and low distortion characteristics allow every complex detail to be heard with all its impact--rich, vibrant qualities faithfully reproduced. Equipped with UniGuard innovations that offer unsurpassed immunity from radio frequency interference, the U853A accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine( line cardioid polar patterns. The battery- or phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.
- Superior off-axis rejection for maximum gain before feedback
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90* to 360*
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U853A) and white (U853AW)
- Operates on battery or phantom power
Features
- Designed for suspension over choirs, instrumental groups and theater stages- Superior off-axis rejection for maximum gain before feedback
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90* to 360*
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U853A) and white (U853AW)
- Operates on battery or phantom power
Specs
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Freq. Response: 30-20,000 Hz
LF Freq. Roll-Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: Phantom: -42 dB (7.9 mV) re 1V at 1 Pa
Battery: -43 dB (7.0 mV) re 1V at 1 Pa
Impedane: Phantom: 200 ohms
Battery: 270 ohms
Max. Input Sound Level: Phantom: 133 dB, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (typical): Phantom: 109 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current / Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Off, on-flat, on-roll-off
Weight (Mic): 0.5 oz (14 g)
Weight (Power Module): 4.9 oz (139 g)
Dimensions (Mic): 1.34 in. (34.0 mm) long,
0.48 in. (12.2 mm) diameter
Dimensions (Power Module): 3.31 in. (84.0 mm) H x
2.48 in. (63.0 mm) W x
0.87 in. (22.0 mm) D
Output Connector (Power Module): Integral 3-pin XLRM-type
Cable: 25.0 ft (7.6 m) long (permanently attached to microphone), 0.13 in. (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories Furnished: AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8531 power module; AT8438 5/8 inch-27 stand adapter; battery
Audio-Technica Case Style: M12
Polar Pattern: Cardioid
Freq. Response: 30-20,000 Hz
LF Freq. Roll-Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: Phantom: -42 dB (7.9 mV) re 1V at 1 Pa
Battery: -43 dB (7.0 mV) re 1V at 1 Pa
Impedane: Phantom: 200 ohms
Battery: 270 ohms
Max. Input Sound Level: Phantom: 133 dB, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (typical): Phantom: 109 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current / Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Off, on-flat, on-roll-off
Weight (Mic): 0.5 oz (14 g)
Weight (Power Module): 4.9 oz (139 g)
Dimensions (Mic): 1.34 in. (34.0 mm) long,
0.48 in. (12.2 mm) diameter
Dimensions (Power Module): 3.31 in. (84.0 mm) H x
2.48 in. (63.0 mm) W x
0.87 in. (22.0 mm) D
Output Connector (Power Module): Integral 3-pin XLRM-type
Cable: 25.0 ft (7.6 m) long (permanently attached to microphone), 0.13 in. (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories Furnished: AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8531 power module; AT8438 5/8 inch-27 stand adapter; battery
Audio-Technica Case Style: M12
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.