Audio-Technica ATW-T1001 System 10 Wireless Bodypack Transmitter

Add another transmitter to your A-T System 10 wireless setup. This bodypack is compatible with lavalier mics and guitar cables with a cW-style connector.

The Audio Technica ATW-T1001 System 10 Wireless Bodypack is designed for use with the System 10 wireless system. This bodypack transmitter has a cW-style locking 4-pin connector.

Audio-Technica's System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.

- Operating Frequencies: 2.4 GHz ISM band
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: <0.05% typical
- Operating Range: 30 m (100') typical - Open range environment with no interfering signals
- Operating Temperature Range: 0* C to +40* C (32* F to 104* F) - Battery performance may be reduced at very low temperatures
- Frequency Response: 20 Hz to 20 kHz - Depending on microphone type

Body Pack Transmitter Specifications:

- RF Power Output: 10 mW
- Spurious Emissions: Following federal and national regulations
- Input Connections: Four-pin Locking Connector (cW-style)
- Pin 1: GND
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +9V
- Batteries: Two 1.5V AA (not included)
- Battery Life: >7 hours (alkaline) - Depending on battery type and use pattern
- Dimensions (W x H x D): 2.76 x 4.21 x 0.98 inches
- Net Weight: 3.5 oz. (without batteries)
Dimensions and Weight in Packaging
(2.4 Ghz ISM)
Shipping Weight: 0.5 lbs
Shipping Dimensions: 10 x 6 x 3 in
Manufacturer Part Number (MPN): ATW-T1001

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000

(2.4 Ghz ISM)

On Backorder
Preorder Today
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to