Audix MB8450 MicroBoom System with M1250B Choir Microphone and Carbon Fiber Boom

zZounds Gear Experts Say...
Float these inconspicuous area mics in front of your choir or small ensemble. This set includes an M1250B cardioid condenser on an 84-inch carbon fiber boom.

Part of Audix's MicroBoom System, the MB8450 package includes an 84-inch carbon fiber boom with M1250B microphone, clutch assembly, and cable. The M1250B miniature cardioid condenser microphone attaches to the mini-XLR connector at the end of the gooseneck, and runs on 18-52 V phantom power.

M1250B Miniature Cardioid Condenser Microphone

The M1250B microphone, despite its size, has all the attributes of a world class recording microphone. Low noise integrated electronics allows the microphone to function in the close field as well as in distance miking. It can be used on a wide variety of acoustics instruments as well as on voice and vocal ensembles.

The M1250B's cardioid pattern is the most widely used, as it offers a good balance between the sound of the instrument or voice within the context of the room or venue. For instruments, the M1250B may be positioned anywhere from 3 - 12 inches depending on instrument and room acoustics. For speech or singer voice the typical working distance is 8 - 10 inches. For area miking or group vocals the working distance can be between 2 - 3 feet from the sound source.

MicroBoom Carbon Fiber Boom Stand

The MicroBoom is a modular system and simple to use. The microphone attaches to the mini-XLR connector at the end of the gooseneck. To release and remove the microphone from the connector, simply push the black button on the side of the miniXLR and pull the microphone off.

The MicroBoom carbon fiber boom stand can be used with any read more of the microphones in Audix's The Micros series, providing a broad selection of pick-up patterns, output levels and frequency responses. A high quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom. The stand adapter offers total control over the angle, rotation and position of the carbon fiber rod by way of a flexible metal gooseneck. The MicroBoom provides an ultra-clean, professional and elegant appearance on stage while providing exceptional performance and portability.

Features:

- Clean, elegant appearance
- Choice of microphone capsules available to swap in
- No external power needed
- Ideal for Choir, Ensemble vocal, Theatre, Orchestral zone
- Lightweight, low-profile with miniaturized preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- Transducer Type: Condenser
- Polar Pattern: Cardioid
- Frequency Response: 50 Hz - 19 kHz
- Sensitivity: 10 mV / Pa @ 1 kHz
- Maximum SPL: ≥140 dB @ 0.5% THD
- Equivalent Noise Level: 21 dB (A-weighted)
- Signal-to-Noise Ratio: 73 dB
- Output Impedance: 150 ohms
- Power Requirements: 18-52 V phantom power
- Connector Type: 3-pin mini-XLR male
- Included Cable Length: 25 feet

Dimensions and Weight in Packaging

Base Item

  • Shipping Weight: 3.69 lbs
  • Shipping Dimensions: 88 x 4 x 4 in
  • Manufacturer Part Number (MPN): MB8450

For support or warranty questions, please contact the manufacturer:
Phone: 503-682-6933 / 800-966-8261
Email: info@audixusa.com

New

$719.00
  • 12 payments of 
    $59.92/mo
  • 8 payments of 
    $89.88/mo
FREE -Day Shipping!
Get it for 
Get it (or get it with an order of ), if you order within
Shipping to