Audix M1370B Cardioid Microboom Wireless Kit
zZounds Gear Experts Say...
Adapt your Audix Microboom mic system for wireless operation with the M1370B. Includes mic, cables, and mic stand mount.
Overview
The M1370B is a retrofit kit designed to adapt an existing wired Audix Microboom System for wireless operation. It contains the M1370B cardioid microphone designed to operate on 4.5 - 5.5 v bias power supplied by Audix, Shure and other popular body pack transmitters (not included) that provide 4.5 to 5.5 volts power, two 6' cables terminated in TA3F and TA4F to plug into a wireless body pack and the Audix MBWFLEX to mount the body pack transmitter to a standard straight mic stand. Standard 48 V phantom power voltage from an audio mixer or recording device will not damage the microphone, however it will not pass signal.
Body pack transmitters not included.
- Compatible with standard 5V body pack transmitters
- Fast setup, portable, and cable-free
- Designed, assembled & tested in the USA
Body pack transmitters not included.
Features:
- Pristine, studio-grade audio quality- Compatible with standard 5V body pack transmitters
- Fast setup, portable, and cable-free
- Designed, assembled & tested in the USA
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Transducer Type: Condenser
- Frequency Response: 50 Hz - 19 kHz
- Polar Pattern: Cardioid
- Output Impedance: 100 Ohms
- Sensitivity: 10 mV (C/HC) / Pa @ 1 kHz
- Signal to Noise: Ratio 72 dB
- Equivalent Noise: Level 22 dB
- Maximum SPL: 117 dB SPL
- Dynamic Range: 95 dB
- Power Requirements: 4.5 - 5.5 V
- Current Consumption: (@5V) 2 mA
NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
- Frequency Response: 50 Hz - 19 kHz
- Polar Pattern: Cardioid
- Output Impedance: 100 Ohms
- Sensitivity: 10 mV (C/HC) / Pa @ 1 kHz
- Signal to Noise: Ratio 72 dB
- Equivalent Noise: Level 22 dB
- Maximum SPL: 117 dB SPL
- Dynamic Range: 95 dB
- Power Requirements: 4.5 - 5.5 V
- Current Consumption: (@5V) 2 mA
Dimensions and Weight in Packaging
Base Item
- Shipping Weight: 0.68 lbs
- Shipping Dimensions: 9 x 4 x 3 in
- Manufacturer Part Number (MPN): M1370B
Consumer Alert
Most users do not need a license to operate this wireless system. Nevertheless, operating this system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's website at www.fcc.gov/cgb/wirelessmicrophonesNOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 503-682-6933 / 800-966-8261
Email: info@audixusa.com
Phone: 503-682-6933 / 800-966-8261
Email: info@audixusa.com
New
$499.00
- 8 payments of$62.38/mo
FREE
-Day
Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.