ART Dual Limiter Classic PWM Compressor

No frills here -- just 2 channels of serious dynamics control. ART's classic pulse width modulation design yields low noise and smooth, transparent limiting.
Applied Research and Technology's DUAL LIMITER offers a superb level of sound quality, and its design will enhance the sonic textures of your audio system for years to come. Developed in partnership with studio and live-sound engineers, the DUAL LIMITER is very musical.

The heart of the Dual Limiter is a PWM gain control circuit. Combined with its intelligent detector, the result is a classic-sounding compressor/ limiter without the traditional noise and distortion artifacts.

The DUAL LIMITER was designed and constructed with high quality components, assuring a lifetime of quiet, reliable performance.

Features:

- Two channels of dynamics processing
- Selectable stereo linking of channels
- XLR balanced inputs and outputs
- 1/4" TRS active balanced inputs and outputs
- Variable Attack and Release controls
- Selectable Slope
- Hardwire bypass
- 5-segment Gain Reduction LED array
- Internal power supply
- 3-year parts and labor warranty

The DUAL LIMITER may be used as either a compressor or a limiter with all of the following:
- Multitrack or analog recording device.
- In a mixer's channel insert points.
- Between a microphone preamp and signal processors.
- Between pre-amplified electronic musical instruments (synthesizers, guitars, bass, samplers, acoustic instruments with pickups) and other line-level equipment.
- The ART DUAL LIMITER may be used in a wide variety of applications and environments. Housed in a rack-mountable, all-steel enclosure, the unit read more is designed for continuous professional use.
read less
-Equivalent Input Noise: -97dBu (20-20kHz)
-Input Impedance: 20k Ohms
-Output Impedance: Balanced/Unbalanced 150 Ohms
-Maximum Input Level: +20dBu
-Maximum Output Level: +20dBu
-Overall Gain: +40dB max
-Frequency Response: 10Hz to 30kHz (+/- 1dB)
-Dynamic Range: >105dB (20-20kHz)
-Attack Time: 0.5mSec. to 50mSec., variable
-Release Time: 100mSec. to 3 Sec., variable
-Slope: 4:1 or >20:1, switchable (OR 2:1 or 1.5:1 when patching output to det. loop input)
-Total Harmonic Distortion: 0.03% (typical) @ 0dBm Out
-Power Requirements: USA 105 to 125 VAC / 60 Hz, 1/2A fuse, <15W
- Export units configured for country of destination.
-Dimensions: 1.75? H x 19? W x 5.9? D (44.5mm x 482.6mm x 150mm)
-Weight: 4.7 lbs (2.1 kg)
-Notes: 0 dBu = 0.775 VRMS
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 4.7 lbs
Shipping Dimensions: 19 x 6 x 2 in
Manufacturer Part Number (MPN): Duallimiter
For support or warranty questions, please contact the manufacturer:
Phone: 585-436-2720