Bose F1 Model 812 Flexible Array Loudspeaker








zZounds Gear Experts Say...
With a 12" woofer and a flexible array of 8 HF drivers you can easily aim to cover the whole room, this PA speaker delivers 1000 watts of clear Bose sound.
Overview
The Bose F1 Model 812 Flexible Array Loudspeaker is the first powered portable full-range loudspeaker that lets you control its vertical coverage pattern. Simply push or pull the array into position to create "Straight," "C," "J" or "Reverse J" coverage patterns. And once set, the system automatically changes the EQ to maintain optimum tonal balance for each coverage pattern. So whether you're playing at floor level, on a stage, or facing raked seats or bleachers, you can now adapt your PA to match the room.
See how the Bose F1 Model 812 and F1 Sub can adjust to cover any room:
Front-of-house engineers give their review of the Bose F1 System:
The loudspeaker is engineered with an array of eight high-output mid/high drivers and a high-powered 12" woofer delivering bass down to 43 Hz (-10 dB). A lower crossover point delivers high SPL performance while maintaining vocal and midrange clarity that's dramatically better than conventional loudspeakers.
The loudspeaker is compatible with standard 35mm speaker stands and has 1,000 watts of power, so you can fill nearly any venue with sound.
For the first time, the F1 Model 812 Loudspeaker allows you to focus sound where it's needed. So no matter where you perform, your PA has you covered.
- Vertically oriented… read more 8-driver mid/high line array, with each driver mounted on a custom 100-degree waveguide, helps deliver wide, consistent coverage
- 12-inch LF driver provides high performance at low frequency for strong low-frequency output down to 43 Hz (-10 dB)
- Bi-amplified design with 2 high-output, Class-D amplifiers to separately power the FLEX array and 12-inch LF driver
- 2 input channels with independent volume controls and Line Level/Mic switch on Channel 1
- Full-range performance from 43 Hz - 20 kHz (-10 dB)
Learn more about the Bose F1 Model 812 and F1 Subwoofer:
Learn how easy it is to set up the Bose F1 Model 812 and F1 Subwoofer:
read less
See how the Bose F1 Model 812 and F1 Sub can adjust to cover any room:
Front-of-house engineers give their review of the Bose F1 System:
The loudspeaker is engineered with an array of eight high-output mid/high drivers and a high-powered 12" woofer delivering bass down to 43 Hz (-10 dB). A lower crossover point delivers high SPL performance while maintaining vocal and midrange clarity that's dramatically better than conventional loudspeakers.
The loudspeaker is compatible with standard 35mm speaker stands and has 1,000 watts of power, so you can fill nearly any venue with sound.
For the first time, the F1 Model 812 Loudspeaker allows you to focus sound where it's needed. So no matter where you perform, your PA has you covered.
Features:
- Flex array is a flexible baffle that can be configured into four unique shapes ("Straight," "C," "J" or "Reverse J"), allowing the customer to choose the best possible coverage pattern for the application- Vertically oriented… read more 8-driver mid/high line array, with each driver mounted on a custom 100-degree waveguide, helps deliver wide, consistent coverage
- 12-inch LF driver provides high performance at low frequency for strong low-frequency output down to 43 Hz (-10 dB)
- Bi-amplified design with 2 high-output, Class-D amplifiers to separately power the FLEX array and 12-inch LF driver
- 2 input channels with independent volume controls and Line Level/Mic switch on Channel 1
- Full-range performance from 43 Hz - 20 kHz (-10 dB)
Learn more about the Bose F1 Model 812 and F1 Subwoofer:
Learn how easy it is to set up the Bose F1 Model 812 and F1 Subwoofer:
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
System Performance:
- System Type: Self-powered, two-way
- Frequency Response (-3 dB): 52 Hz - 15.5 kHz
- Frequency Range (-10 dB): 43 Hz - 20 kHz
- Nominal Dispersion: 100 degrees H x 40 degrees V (C-position)
- Maximum SPL @ 1 m: 132 dB SPL (peak)
- Crossover Frequency: 600 Hz Acoustic 4th order Butterworth
Amplification:
- System Power: 1000 W
- Distortion at Rated Power: 0.1 % Max (30 Hz - 15 kHz)
- System Limiter: Dynamic limiter
- Power Indicator: Blue LED - system on
Transducers:
- Drivers: 8 x 2.25" mid-high drivers; 1 x 12" LF
Channels:
- Signal Indicators: POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT
- Input Connections:
-- Channel 1: XLR Balanced: Pin 1 (GND), Pin 2 (+), Pin 3 (-)
-- Channel 2: 1/4" TS/TRS, 18" TS/TRS, (2) RCA
Controls: Volume level, Signal input select, Front LED function select, EQ select, Power on/off
Additional Connections:
- Line Output: XLR balanced
- AC Mains: IEC Connector
Physical:
- Enclosure: High-impact composite materials
- Grille: Powder-coated perforated steel grille
- Dimensions: 26.1" H x 13.1" W x 14.6" D (664.66 x 334.3 x 372.5mm)
- Net Weight: 44.5 lbs (20.18 kg)
Power Supply Voltages:
- Universal: AC power rating: 100-240 V 50 / 60 Hz +/- 20 %, 200 W max
- System Type: Self-powered, two-way
- Frequency Response (-3 dB): 52 Hz - 15.5 kHz
- Frequency Range (-10 dB): 43 Hz - 20 kHz
- Nominal Dispersion: 100 degrees H x 40 degrees V (C-position)
- Maximum SPL @ 1 m: 132 dB SPL (peak)
- Crossover Frequency: 600 Hz Acoustic 4th order Butterworth
Amplification:
- System Power: 1000 W
- Distortion at Rated Power: 0.1 % Max (30 Hz - 15 kHz)
- System Limiter: Dynamic limiter
- Power Indicator: Blue LED - system on
Transducers:
- Drivers: 8 x 2.25" mid-high drivers; 1 x 12" LF
Channels:
- Signal Indicators: POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT
- Input Connections:
-- Channel 1: XLR Balanced: Pin 1 (GND), Pin 2 (+), Pin 3 (-)
-- Channel 2: 1/4" TS/TRS, 18" TS/TRS, (2) RCA
Controls: Volume level, Signal input select, Front LED function select, EQ select, Power on/off
Additional Connections:
- Line Output: XLR balanced
- AC Mains: IEC Connector
Physical:
- Enclosure: High-impact composite materials
- Grille: Powder-coated perforated steel grille
- Dimensions: 26.1" H x 13.1" W x 14.6" D (664.66 x 334.3 x 372.5mm)
- Net Weight: 44.5 lbs (20.18 kg)
Power Supply Voltages:
- Universal: AC power rating: 100-240 V 50 / 60 Hz +/- 20 %, 200 W max
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 53.5 lbs
- Shipping Dimensions: 32 x 21 x 19 in
- Manufacturer Part Number (MPN): 731419-1110
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-869-1855 or 800-379-2073
Web: https://www.bose.com/en_us/support.html
Phone: 800-869-1855 or 800-379-2073
Web: https://www.bose.com/en_us/support.html
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(20 ratings)
Submitted October 19, 2015 by Otis Steel
"Bose f1 model 812 flexible array loudspeaker"
Verified Purchaser
zZounds has verified that this reviewer purchased this specific product from us.
The sound is unbelievable. I could use it by itself and get great sound and great bass. But to use it with the F 1 sub is totally amazing
Musical Background:
Karaoke and video DJ for about 20 years
Musical Style:
All genres of music
29 of 29 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
New
$1,399.00
- 12 x$116.58
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.