Our recommended alternative

Crown XTi2002 Power Amplifier with DSP (2000 Watts)

Part of Crown's XTi 2 series and loaded with smart DSP, this power amp gives you extensive control over EQ, crossover, limiting -- even a subharmonic synth.

Crown XTi2002 Power Amplifier with DSP (2000 Watts)

$999.00
  • 18 x  
  • 12 x  
    $83.25
  • 8 x  
    $124.88
  • No Credit Check
    6 x  
    $166.50
  • No Credit Check
    4 x  
    $249.75
FREE delivery Tomorrow

Crown XTi 2000 Power Amplifier (2000 Watts)

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Crown XTi 2000 Power Amplifier (2000 Watts), Main
Crown XTi 2000 Power Amplifier (2000 Watts), Rear
Crown XTi 2000 Power Amplifier (2000 Watts), Main Crown XTi 2000 Power Amplifier (2000 Watts), Rear
With powerful, reliable performance, the Crown XTi 2000 is a professional tool designed and built for portable PA applications.

The Crown XTi 2000 amplifier is a professional tool designed and built for portable PA applications. It's rugged and lightweight, and offers unmatched value in it's class.

The Crown XTi 2000 amplifier features an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon and binding-post outputs, short-circuit protection and more.

With it's powerful, reliable performance, the Crown XTi 2000 amp easily handles 2-ohm loads and is capable of chest-thumping lows. Plus, your investment in an XTi 2000 amplifier is backed by Crown's 3-Year, No-Fault, Fully Transferable Warranty.

Crown XTi 2000 features:
- Integrated proprietary DSP with LCD front panel display
- Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
- Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
- Extremely versatile, handling a wide range of speaker impedances and outputs
- Switch-mode universal power supply
- Speaker presets for crossover frequencies, EQ, limiting, and delay
- All products fill 2U rack spaces and weigh under 17 lbs.; weight sets a new standard in lightweight amps (20% less)
- Speakon and binding post outputs, XLR inputs and loop-thrus… read more
- Comprehensive LED status per channel
- 3-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Crown XTi 2000 Power:
8 ohms: 475W
4 ohms: 800W
2 ohms: 1000W*
8 ohms bridged to mono: 1600W
4 ohms bridged to mono: 2000W*

*With 1% THD. read less

XTi 2000 Power:
8 ohms: 475W
4 ohms: 800W
2 ohms: 1000W*
8 ohms bridged to mono: 1600W
4 ohms bridged to mono: 2000W*

*With 1% THD.

Voltage Gain at 1kHz, 8 ohm rated output:
XTi 1000: 30.5 dB
XTi 2000: 32.9 dB
XTi 4000: 34.2 dB

- Frequency Response: +/-0.25 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms
- Phase Response (at 1 watt, 20 Hz to 20 kHz): +/-15 degrees
- Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode
- Sensitivity: 1.4V
- Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 105 dB (A weighted)
- Damping Factor: Better than 500 from 20 Hz to 500 Hz
- Crosstalk: > 80 dB below rated power, 20 Hz to 1 kHz
- Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz
- Input Stage: Input is electronically balanced and employs precision 1% resistors
- Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced
- Maximum Input Signal: +22 dBu typical
- AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V 50/60 Hz

AC Line Current:
XTi 1000: 6.5A
XTi 2000: 6.9A
XTi 4000: 8.0A

- At Idle: Draws no more than 90 watts
- Operating Temperature: 0 degrees C to 40 degrees C at 95% relative humidity (non-condensing)

DSP Section
- EQ: 4-band paragraphic per channel, boost/cut

For support or warranty questions, please contact the manufacturer:
Phone: 800-342-6939
Data Sheet
Owner's Manual
Spec Sheet

Reviewers gave this product an overall rating of 5 out of 5 stars. (40 ratings)
Submitted July 28, 2010 by a customer from accruewelding.com

"I Love It, My Boys Love It....... like I said my next move is to but the 4000 Watt Crown. What more can I say.... BUY IT, you wo"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
My Plans Are To But The Crown XTi4000 next to Drive My Bass/Sub Bass............ Bridged. Bass driven Omnidirectional Will Pound US d:)
Sound
This amp is incredible, I use it as our home stereo, and do play out for family and friends. We have had people approximately 1 mile from our last party tell us they could hear it clearly, one was on top of the mountain, and the others we're down by the river. For 2000 watts - everyone loved it.
Features
If you have a brain you can figure this out. Programable, with pre-sets. NICE! Nice features.
Ease of Use
Read the manual, and experiment. Any problems you can't figure out call Crown they will help. Of course there is a learning curve, agains it's not that complicated if you read the manual.
Quality
VERY VERY NICE DESIGN AND FOR THE MONEY EXCELLENT QUALITY
Value
Great Value For The Money!
Manufacturer Support
Haven't had any problems, but I have read Crown is there for you when you need them.
The Wow Factor
Clean Look, Stand Out Front Cover.... What Can I Say. NICE!

Musical Background:

Active Musician, and Party Entertainment Expert d:)

Musical Style:

ALl of the above, if it's good we play it! No joke.
5 of 5 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds