Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters, Action Position Back
Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters, Action Position Back
Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters, Action Position Back
Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters, In Use
Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters, Action Position Back Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters, Action Position Back Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters, Action Position Back Xvive U5R Dual-Channel Digital Wireless Receiver for U5T Transmitters, In Use
This camera-mountable wireless receiver captures audio from up to two Xvive U5T transmitters, and runs on its rechargeable battery for up to 5 hours.

Mount the Xvive U5R dual-channel digital wireless receiver on your DLSR or mirrorless camera's shoe mount, and capture audio from up to two Xvive U5T transmitters. This easy-to-use receiver has a small beltpack form factor.

Equipped with four internal antennas, the U5R harnesses the power of true-diversity technology to avoid dropouts, giving you a reliable 2.4 GHz wireless signal. Use the U5R's auto-scan function to automatically find a clear channel and pair with your U5T transmitters.

The U5R receiver features a bright OLED screen that displays battery life, the battery life of paired transmitters, channel, gain, clip, and mute status. Two gain knobs let you adjust recording levels independently for each microphone channel.

Choose stereo mode to record audio from two transmitters separately on your camera's right and left channels, isolating them so you can easily adjust each mic's level later in postproduction. Or choose mono mode to combine both microphones on both sides of your audio track -- useful for live streams.

Your U5R comes with a replaceable Xvive ID799 lithium-ion rechargeable battery, which gives you up to 5 hours of operation on a full charge.


See how easy it is to use the U5 wireless system in this video from Xvive:


Learn how to set up your U5 wireless system with your camera:

Receiver Type: Beltpack
Dimensions: 54 x 44 x 65mm
Weight: 53g without battery
Housing: Molded plastic and cast metal
Charging Voltage & Current: 5V 2A
Battery: 3.7V rechargeable Li-ion, 860mAh(Included, Replaceable)
Impedance: Output 470O (1KHz)
Output connector: 3.5 mm stereo TRS jack
Max output level: 2V RMS
Battery life: Up to 5 hours
Antenna Impedance: 50 Ohms
Antenna Type: 1/4 wave sleeve dipole, non-removable
Number of antennas: 4
Display: OLED
Audio output max level: 0 dBV
Frequency response: 20 Hz to 20 kHz
Output gain control range: -54dB to +24dB
Frequencies: 2400-2483.5 MHz
Wireless Range: Up to 100ft; depends on RF signal absorption, reflection and interference
Dynamic Range: MIC: 99dB; LINE: 107dB
Signal-To-Noise Ratio: MIC: 95dB; LINE: 107dB
Battery Life: 5 Hours (Xvive U5B battery)
RF Sensitivity: -86dBm
Total Harmonic Distortion: 0.2%
RF Output Power: 10 mW E.I.R.P. max
Operating Temperature Range: -18 degrees to 57 degrees(battery characteristics may limit this range)
Channel Count: Up to 6
Latency: 6ms
High-resolution audio: 24-bit/48kHz

For support or warranty questions, please contact the manufacturer:
Email: info@xviveaudio.com
Web: https://xvive.com/audio/contact/

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer