Xvive U35T 5.8 GHz Digital Wireless Transmitter for Dynamic Microphones

Xvive U35T 5.8 GHz Digital Wireless Transmitter for Dynamic Microphones, New, Action Position Back

zZounds Gear Experts Say...

Transmit your mic signal over the less crowded 5.8GHz frequency for reliable signal with the Xvive U35T digital wireless microphone transmitter.

Overview

The Xvive U35T dynamic microphone wireless transmitter operates on the 5.8GHz frequency for stable, interference-free signal. Its compact transmitter and receiver deliver high-quality audio with low latency. Ideal for live performances, recordings, and content creation, it turns any dynamic microphone wireless, and also wirelessly transmit audio signals with easy setup and reliable performance.

Features:

- High-fidelity plug-and-play wireless transmitter for dynamic microphones, for use with a U35 Receiver
- 5.8 GHz True Diversity wireless Transmitter for dynamic microphones
- Automatic scanning for the best signal out of the available 6 channels
- 24-bit / 48 kHz digital audio with low distortion and wide frequency response
- Stable 5.8 GHz wireless connection with a range of up to 100 feet (30.5 m)
- Mono balanced XLR input
- Two input modes: Mic mode for dynamic microphones, Line mode for PA systems

FREE VOICE
The U35 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians... anyone who wants to move freely while speaking or performing to an audience!

BYPASS THE MIXER
If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don't need a mixer! Just connect your U35 receiver directly to the XLR input of the cabinet.

CONTROL YOUR RANGE
The U35 receiver can be connected to an XLR cable or snake, meaning that… read more the transmitter's signal doesn't have to reach all the way to the soundboard or monitor desk--it can broadcast to the front of the stage, or any central and convenient location.

GET AMPED
Beyond all the vocal applications, the U35 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.

PA FRIEND
Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors.

FREE INSTRUMENTS
Use the U35 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Please note that U35 is not compatible with condenser microphones -- so if you do use a condenser mic, the choice for you is the U3C Microphone Wireless System.

Specs

Transmitter
- MODEL: U35T
- MODE: Input: Mic / Line (-10 dB)
- CONNECTOR: Balanced XLR (female)
- DIMENSIONS: 31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"
- WEIGHT: 93 g / 3.3 oz
- MUTE: Yes

Battery
- TYPE: Rechargeable Lithium-ion (internal)
- BATTERY LIFE: 5 hrs
- CHARGING TIME: 2.5 hrs (full charge)
- CHARGING VOLTAGE: 5V (USB)
- USABLE WHILE CHARGING: Yes

System
- WIRELESS TYPE: 5.8 GHz ISM worldwide open band
- BIT DEPTH / SAMPLE RATE: 24-bit / 48 kHz
- SWITCHABLE CHANNELS: 6
- SIMULTANEOUS CHANNELS: 6
- MODE: Input: Mic / Line
- FREQUENCY RESPONSE: 20 Hz - 20 kHz (-3dB)
- DYNAMIC RANGE: 110 dB (-3 dB)
- MICROPHONE COMPATIBILITY: Dynamic and battery-powered condenser microphones
- SIGNAL-TO-NOISE RATIO: 110 dB
- TOTAL HARMONIC DISTORTION: 0.2%
- LATENCY: 5 ms
- OPERATING RANGE: 30.48 m / 100 ft (line-of-sight)

Dimensions and Weight in Packaging

Base Item

Shipping Weight: 0.36 lbs
Shipping Dimensions: 6 x 3 x 2 in
Manufacturer Part Number (MPN): U35T

Consumer Alert

Most users do not need a license to operate this wireless system. Nevertheless, operating this system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.