Walrus Audio Iron Horse V2 Distortion Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Walrus Audio Iron Horse V2 Distortion Pedal, Action Position Front
Walrus Audio Iron Horse V2 Distortion Pedal, Action Position Side
Walrus Audio Iron Horse V2 Distortion Pedal, Action Position Back
Walrus Audio Iron Horse V2 Distortion Pedal, Action Position Side
Walrus Audio Iron Horse V2 Distortion Pedal, Action Position Front Walrus Audio Iron Horse V2 Distortion Pedal, Action Position Side Walrus Audio Iron Horse V2 Distortion Pedal, Action Position Back Walrus Audio Iron Horse V2 Distortion Pedal, Action Position Side
zZounds Gear Experts Say...
All hail the return of classic distortion! The Walrus Audio Iron Horse V2 is a true-bypass behemoth that offers three distortion modes, so you can get rowdy.

The Walrus Audio Iron Horse V2 is a return to the classic distortion: thick, punchy, riffy and rowdy. The true bypass, high-gain behemoth has been updated to help steer the stallion or let the reins loose for a full-on distorted onslaught. Dial back the gain and it can be used as a thick, warm overdrive. The Iron Horse has three distortion modes operated by a toggle switch that changes between different clipping diodes providing more versatility in shaping the tone of the distortion. Left will give some compression. Right will give you a higher amount of compression and middle will give you a wide open, non-compressed signal.

The Iron Horse V2 comes in a Galaxy Gold finish with black ink. Artwork by illustrator Adam Forster features a battle-ready stallion cloaked in armor.


Features:

- Updated Level control so it's easier to dial in unity gain
- Updated Tone control to allow more treble to be dialed in if desired
- Updated Distortion control to smooth out the range of distortion, making it easier to dial in lower gain tones

Power: 9V DC 10mA
Dimensions: 4.77 x 2.9 x 2.3 inches

The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.

For support or warranty questions, please contact the manufacturer:
Phone: 405-295-7847
Email: customerservice@walrusaudio.com
Web: https://www.walrusaudio.com/pages/contact

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer