
Whirlwind IMP2 Standard Direct Box
The Whirlwind IMP2 is a simple, standard, yet bulletproof DI box. Passive operation eliminates concerns about powering up on a crowded stage.
Whirlwind IMP JT High-End Passive Direct Box
No longer available at zZounds

zZounds Gear Experts Say...
Every gigging musician needs a good DI -- and venues and studios need a stack of them. Plug directly into great sound with the IMP JT's Jensen transformer.
Overview
This top of the line passive DI features a Jensen transformer renowned for wide frequency response and superior noise reduction. Eliminates hum and buzz with a ground lift switch.
Depend on the rugged metal box to provide extra shielding and to extend the life of this direct box.
- LOW Z OUTPUT (XLR Jack): A male XLR that provides a low-impedance balanced output suitable for connection to a mixing console or work station.
- GROUND LIFT SWITCH: This switch disconnects the ground between the input connectors and the output connectors when set to the LFT position. The ground is connected through when the switch is in the GND position.
Depend on the rugged metal box to provide extra shielding and to extend the life of this direct box.
Features:
- PARALLEL HIGH Z IN/OUT (1/4" JACKS): Two 1/4" jacks which provide the means to input and "loop through" the signal source. These jacks are wired in parallel, it makes no difference which one is used for input or output.- LOW Z OUTPUT (XLR Jack): A male XLR that provides a low-impedance balanced output suitable for connection to a mixing console or work station.
- GROUND LIFT SWITCH: This switch disconnects the ground between the input connectors and the output connectors when set to the LFT position. The ground is connected through when the switch is in the GND position.
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.