Warm Audio Fen-Tone Instrument Ribbon Microphone

zZounds Gear Experts Say...
The mic wizards at Warm modernized a '50s-era ribbon mic! Try the Fen-Tone for smooth, natural, mids-boosted clarity on guitar amps or just about any source.

The Warm Audio Fen-tone is inspired by a classic 50s ribbon mic built with upgraded, modern components to deliver iconic tones. Like the original B&O design, the Warm Audio Fen-tone recreates the compact, pencil-style design with ventilated sides that can easily be placed in crowded recording environments. Unlike the original, Fen-tone features modern upgrades including a custom Japanese ribbon, rare-earth Neodymium magnet, and CineMag USA transformer to deliver the iconic ribbon tones made popular in contemporary music on electric guitars, overheads, horns, and many more sources. Fen-tone adds an all-analog 26 dB JFET in-line preamp, allowing for active use - a critical feature for using ribbons directly with underpowered interface preamps.

Features:

- Inspired by a classic 50s ribbon microphone
- Easily be placed in crowded recording environments
- Great for electric guitars, pianos, overheads, horns, & more
- Delivers rich detail at high SPLs with powerful bass & rich midrange
- Warm "forgiving" tone by taming top-end harshness above 15 kHz
- Smooth presence without exaggerated sibilance or harshness
- All analog in-Line 26dB Preamp (Phantom Power Required)
- Custom CineMag USA Transformer
- Powerful Rare-Earth Neodymium Magnet
- 1.8-Micron thick Ribbon
- Figure-8 Polar Pattern
- Eliminates side-address noise

The Ultimate Ribbon Mic for Instrument Recording
The Warm Audio Fen-tone is a recreation of a classic 50s ribbon mic design with modern components, iconic read more tones, and feature upgrades. Delivering rich detail at high SPLs, the figure-8 Fen-tone is ideal for many instruments, especially guitar cabs, horns, drum overheads, pianos, and more. In addition to custom, premium components, Fen-tone includes an in-line Warm Lifter preamp to add 26dB of clean, analog gain to setups with inferior or underpowered preamps.

Tight Lows, Rich Mids, No Harsh Highs
Fen-tone captures powerful bass & rich midrange, true to the sound profile of the most sought-after small-format ribbon microphone. In addition to the bass and midrange emphasis, Fen-tone shows off its warm "forgiving" tone by taming top-end harshness above 15 kHz for smooth presence without exaggerated sibilance or harshness.

Tailor-Made for Guitar, & More
Fen-tone excels on loud sources that require detail while handling high SPLs, like electric guitar cabs, overheads, and horns. The upgraded components in Fen-tone deliver intricate midrange detail that helps guitars shine in dense mixes.

Selectable All-Analog 26 dB In-Line Warm Lifter Active Preamp
Fen-tone has a selectable, 26dB in-line discrete 5k Ohm high-impedance JFET Warm Lifter circuit onboard, making it easy to plug directly into audio interfaces or inferior preamps without volume, tone, and frequency loss.

Figure-8 Polar Pattern
Fen-tone has a figure-8 polar pattern which helps eliminate side-address noise when recording. That means that Fen-tone will pick up what is directly in front of it and behind it. This feature is great for recording two acoustic instrumentalists facing each other, playing into either side of the mic without picking up as much bleed as other microphone designs.

Hand-Inspected & Tested at Warm Audio HQ in Austin, Texas
Carefully inspected at Warm Audio Headquarters in Austin, Texas by trained engineers & musicians with a passion for helping you sound your best.

Included Accessories:
- Heavy-Duty Flight Case
- Mic Clip
- Protective Mic Sock
read less

Type: Instrument Ribbon Microphone
Preamp: Selectable 26dB In-Line Lifter (Phantom Power Required)
Transformer: Custom CineMag USA Transformer
Magnet: Powerful Rare-Earth Neodymium Magnet
Ribbon: 99.1% Aluminum, 1.8-Micron thick Ribbon
Polar Pattern: Figure-8
Frequency Response: 30 Hz-15 kHz (+/- 3db)
Max SPL: 148dB (1kHz=1%T.H.D)
Output Impedance: 300 Ohms (Passive) 150 Ohms (Active)
S/N Ratio: 87dB
Sensitivity (Passive): -47 dBv Re. 1v/pa | (Active): -21 dBv Re. 1v/pa
Dimensions (LxW): 6.7" x 1.5"
Weight: .67 lbs
Dimensions and Weight in Packaging
WA-FT, Single Mic
Shipping Weight: 3.2 lbs
Shipping Dimensions: 13 x 9 x 4 in
Manufacturer Part Number (MPN): WA-FT
WA-2FT, Pair
Shipping Weight: 4.4 lbs
Shipping Dimensions: 13 x 11 x 5 in
Manufacturer Part Number (MPN): WA-2FT

For support or warranty questions, please contact the manufacturer:
Web: https://warmaudio.com/contact-support/

WA-FT, Single Mic

$699.00
  • 12 x  
    $58.25
  • 8 x  
    $87.38
FREE -Day Shipping!
Get it  for
Get it (or get it with an order of ), if you order within
Shipping to