Victory V4 The Jack Pedalboard Amp with Two Notes



zZounds Gear Experts Say...
A pedal-sized rig that doesn't sacrifice tone! Victory's The Jack amp offers a V4 Series preamplifier, 180-watt power amp, and Two Notes DynIR technology.
Overview
The V4 The Jack guitar amp partners a V4 Series all-valve preamp with a solid-state, 180-watt Class D power amp. Building on the success of the V4 The Duchess and The Kraken, the V4 Jack guitar amp continues the ultra-compact size and huge tones by adding even more features. The V4 Jack guitar amp features Two notes audio engineering Torpedo-embedded DynIR Virtual Cabinet technology making it easy to take your cabinets anywhere! The all-rounder of the Victory V4 amp range, the Jack is the amp Victory developed with 'Guthrie Govan'. Four valves in the front end, 180-watt power section, two channels, reverb and Two notes technology. Only 1.7kg / 3.75lbs all the Jack tones in a small box!
Channel one is clean to mild breakup while Channel two is glorious overdrive. The Jack is designed to be able to handle any situation and in the V4 amp format it's portable, powerful and practical.
Two Channels of Versatile Tone:
The V4 Jack has two channels, channel one is clean to mild breakup and channel two is your overdrive channel. The V4 Jack is based in hugely successful V30 Jack, developed with Guthrie Govan to be his 'flying amp'.
The Story of the V4 amp valves!:
"The V4 amps have some interesting valves in them, to be specific 3 CV4014's and 1 EC900. The CV4014's were made in 1981 in the Mullard factory in England and then stored in a climate-controlled atmosphere deep underground, the depot was part of a cold-war nuclear bunker! They lay there until Victory decided to design some… read more products from them!
The EC900 were made by E.I (Elektronska Industrija) in the former Yugoslavia under license from Phillips and Mullard, they were produced to an incredibly high standard so much so, Victory has included a 2-year valve warranty on the V4 amps."
Three-Band EQ:
Powerful bass, middle and treble controls to shape your tone. These also have an effect on the gain character and drive levels just like in any valve guitar amp.
Reverb:
Lush sounding digital reverb gives you ambience aplenty. Run it low for a subtle feeling of space, or max it out for washy, splashy hugeness! The reverb is foot-switchable using a TRS cable (sold separately).
Series Effects Loop:
Sits between the preamp and power amp. Run your time-based effects here for maximum clarity.
Balanced Line Out and Headphone Out:
Send a direct feed to a separate speaker simulator, front of house or wherever you like. Can be used with or without a speaker connected. The inbuilt headphone output makes silent practice quick and easy.
9V DC Power Output:
Want to power some extra pedals and stick this on your board? Victory included a 9V DC centre-negative output that will put out a maximum of 500mA. This is more than enough for the vast majority of drives, fuzzes and analogue delays and so on.
VRC Valve Response Circuit:
The idea behind this little piece of the circuit is to mimic what a "resonance" or "thump" (other adjectives are available!) control does in the power amp of a valve amp. So with the V.R.C () circuit you get closer to how a valve power section should feel but in a tiny amp you can throw in your backpack and still get up to 180 watts of power!
Two notes Technology:
Victory has partnered with the incredibly talented folks at Two notes Audio Engineering to embed their incredible tech in the V4 Jack Guitar amp. Straight out of the box you have access to six presets created by Victory artist Jack Gardiner. These have been specifically created by Jack for the V4 Jack guitar amp. There are ten Victory virtual cabinets included with the amp and a collection of microphones and positions to choose and build your own presets. All this can be accessed by plugging the V4 Jack guitar amp into your computer, via Torpedo Remote (download for free from the Two notes website) this is also where you access the power amp modes, rooms, studio-grade EQ and audio enhancer. Register your device with Two notes to gain access to a further two Two notes DynIR cabs.
read less
Channel one is clean to mild breakup while Channel two is glorious overdrive. The Jack is designed to be able to handle any situation and in the V4 amp format it's portable, powerful and practical.
Two Channels of Versatile Tone:
The V4 Jack has two channels, channel one is clean to mild breakup and channel two is your overdrive channel. The V4 Jack is based in hugely successful V30 Jack, developed with Guthrie Govan to be his 'flying amp'.
The Story of the V4 amp valves!:
"The V4 amps have some interesting valves in them, to be specific 3 CV4014's and 1 EC900. The CV4014's were made in 1981 in the Mullard factory in England and then stored in a climate-controlled atmosphere deep underground, the depot was part of a cold-war nuclear bunker! They lay there until Victory decided to design some… read more products from them!
The EC900 were made by E.I (Elektronska Industrija) in the former Yugoslavia under license from Phillips and Mullard, they were produced to an incredibly high standard so much so, Victory has included a 2-year valve warranty on the V4 amps."
Three-Band EQ:
Powerful bass, middle and treble controls to shape your tone. These also have an effect on the gain character and drive levels just like in any valve guitar amp.
Reverb:
Lush sounding digital reverb gives you ambience aplenty. Run it low for a subtle feeling of space, or max it out for washy, splashy hugeness! The reverb is foot-switchable using a TRS cable (sold separately).
Series Effects Loop:
Sits between the preamp and power amp. Run your time-based effects here for maximum clarity.
Balanced Line Out and Headphone Out:
Send a direct feed to a separate speaker simulator, front of house or wherever you like. Can be used with or without a speaker connected. The inbuilt headphone output makes silent practice quick and easy.
9V DC Power Output:
Want to power some extra pedals and stick this on your board? Victory included a 9V DC centre-negative output that will put out a maximum of 500mA. This is more than enough for the vast majority of drives, fuzzes and analogue delays and so on.
VRC Valve Response Circuit:
The idea behind this little piece of the circuit is to mimic what a "resonance" or "thump" (other adjectives are available!) control does in the power amp of a valve amp. So with the V.R.C () circuit you get closer to how a valve power section should feel but in a tiny amp you can throw in your backpack and still get up to 180 watts of power!
Two notes Technology:
Victory has partnered with the incredibly talented folks at Two notes Audio Engineering to embed their incredible tech in the V4 Jack Guitar amp. Straight out of the box you have access to six presets created by Victory artist Jack Gardiner. These have been specifically created by Jack for the V4 Jack guitar amp. There are ten Victory virtual cabinets included with the amp and a collection of microphones and positions to choose and build your own presets. All this can be accessed by plugging the V4 Jack guitar amp into your computer, via Torpedo Remote (download for free from the Two notes website) this is also where you access the power amp modes, rooms, studio-grade EQ and audio enhancer. Register your device with Two notes to gain access to a further two Two notes DynIR cabs.
Specs
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 5 lbs
- Shipping Dimensions: 13 x 9 x 7 in
- Manufacturer Part Number (MPN): V4 PWR Jack TN HP
- Open Box (Very Good)
- Shipping Weight: 5 lbs
- Shipping Dimensions: 13 x 9 x 7 in
- Manufacturer Part Number (MPN): V4 PWR Jack TN HP
- Open Box (Like New)
- Shipping Weight: 5 lbs
- Shipping Dimensions: 13 x 9 x 7 in
- Manufacturer Part Number (MPN): V4 PWR Jack TN HP
Things To Know
Victory V4 The Jack Pedalboard Amp with Two Notes
Updated November 1, 2024 11:47
by Myles Bacon
What's up everybody, this is Myles from zZounds with some things to know about the Victory V4 The Jack pedalboard amp. Now, if you're looking for a pedal -- an ultra-compact pedal -- that has genuine tube tone within it, the V4 is for you. It has what's called the "Valve Response Circuit," which is designed to closely imitate the feel and the tone of a true valve and tube amp. So, in this small form factor that you can fit on your pedal board or at your feet, you're getting true genuine tube tone without having to lug around a super-heavy amplifier. It's got a three-band EQ as well as master and individual channel volume controls, and it also has Two Notes DSP, meaning you can plug this directly into your computer and create your own virtual cabinet sounds. This allows you to plug this directly into the front of house during a show without needing a cabinet, or you can plug this into a 4-ohm cabinet at 180 watts to use this as a traditional head. So again, if you're looking for a true valve tone amp that is in a super compact form factor, I highly recommend the Victory V4 the Jack pedalboard amp.

Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Web: https://www.victoryamps.com/contact
Web: https://www.victoryamps.com/contact
New
$999.00
- 12 x$83.25
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.