ValveTrain Bennington Pro 112C Guitar Combo Amplifier (45 Watts, 1x12")

Taking its cues from the simplicity of early '60s amps, the Bennington Pro features three 12AX7 pre tubes, two 6L6 power tubes and an analog spring reverb.

The ValveTrain Bennington Pro reaches the next plateau above its lower wattage sibling, the Bennington Reverb, by offering more power, additional tone shaping controls, and a footswitch-enabled RAW mode. The Benny Pro boasts the ValveTrain-voiced all-tube spring reverb, and point-to-point handwiring, and delivers a club- and studio-friendly 45 watts RMS.

Inspired by the simplicity of the amp designs of the early 1960's, the 112C features three 12AX7 dual-triode preamp tubes driving the signal through an all-tube spring reverb circuit and into a matched pair of 6L6GC power tubes. The controls are Volume, Bass, Middle, Treble, Reverb, and the Governor.

The Governor is an output power management control originally designed by Dennis Kager. ValveTrain is pleased to bring this control back to the market through a special arrangement with Dennis. The Governor can be completely switched out of the circuit enabling the full output from the power amp. Power reduction via the Governor is variable. The further the Governor is advanced, the more the power is reduced. Once activated the Governor can variably tame the smoking 45 watts of dual 6L6GC power down to an apartment-friendly 2 watts.

The Bright switch enables a vibrant attack to each note without being overpowering.
The RAW switch disables the tone controls and takes you from the early 60's blackface era and unleashes the raw edge of the late 50's vintage tweed territory.

The Bennington Pro delivers a varied tonal spectrum from read more shimmering cleans through vintage crunch. A quick flick of the guitar volume knob controls the full range of the Bennington Pro's warm voice. The ValveTrain-voiced All Tube Spring Reverb is tuned so that the effect blooms behind the note while allowing for pick attack and note articulation -- not overshadowing the true tone of what the player wants to hear. The reverb can be adjusted to provide a touch of ambience to full out surf tones with its lush full sonic spectrum. This amp is great for home, studio or small venues. Put a microphone in front of it and the Bennington Pro will fill the largest of venues.

All ValveTrain amplifiers continue to prove that high value, affordable, handwired production amplification is still built in America. All of the major components including cabinet, transformers, speakers, board and chassis are proudly made in America. The amp is handwired at the ValveTrain facility in Altamonte Springs, Florida. There are over 50 American small- to medium-sized businesses in the supply chain behind every one of these amps.

Features

- All-Tube Spring Reverb Circuit
- Full Size "Long" 6 Spring Reverb Tank
- Hand-Wired Point to Point Eyelet Board
- Bright Switch
- RAW Switch (Footswitch Enabled)
- Volume, Treble, Middle, Bass, Reverb and the Governor Controls
- Vintage Style Chicken Head knobs
- American-Made High Grade Aluminum Chassis
- American-Made ClassicTone Transformers
- American-Made Baltic Birch Cabinet
read less

Models: 1x12 Combo
Power:
- 45 Watts - Class AB
- Variable power reduction to 2 watts via the Governor
- Fixed Bias
Tubes:
- 12AX7 Dual-Triode (preamp)
- 12AX7 Dual-Triode (reverb)
- 12AT7 Dual-Triode (phase splitter)
- Matched 6L6GC Duet (power)
- Rectifier 5AR4/GZ34
Size: 22x11x20 (LxDxH) - Combo
Weight: 45 lbs - Combo
Speakers: 1x12 Combo - Eminence Wizard
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 60 lbs
Shipping Dimensions: 28 x 26 x 16 in
Manufacturer Part Number (MPN): VT-BP112C
Blemished
Shipping Weight: 60 lbs
Shipping Dimensions: 28 x 26 x 16 in
Manufacturer Part Number (MPN): VT-BP112C

For support or warranty questions, please contact the manufacturer:
Phone: 407-886-7656
Web: http://www.valvetrainamps.com/contact/

Blemished

What is Blemished?
$1,699.00
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to