Trulli Audio Bass50 Double Stack Upgrade Bundle

zZounds Gear Experts Say...
Already own a Trulli Bass50 and Universal Port? This bundle is a second set to stack on top, including Trulli's Stacking Kit hardware and pole-mount add-ons.

The Trulli Audio Bass50 Double Stack Upgrade Bundle turns a Bass50 and Universal Port you already own into a double stack. It adds a second Bass50 Rugged 10" subwoofer and Rugged Universal Port, the Stacking Kit to lock the two together, and the M20 Threaded Pole Plate and 1-foot speaker pole for mounting your top speaker on top of the stack.

This bundle can also be deployed as a self-contained all-in-one subwoofer system, with its own single Bass50 and single Universal Port.

The Trulli Bass50 reaches down to 20Hz and weighs 35.1 pounds with its swappable battery installed. Trulli's ThinDriver technology -- an open ring of neodymium magnets around a perimeter-driven voice coil -- keeps the whole enclosure just 8 inches wide, feet included. Built-in SKAA Pro low-latency wireless and Bluetooth 5.1 let you run it without cables, with 3.5mm aux and USB-C digital connections when you want them wired. The Bass50 is built in Mundelein, Illinois, and ships with a wall charger and a 12 VDC vehicle charger.

The Rugged Universal Port turns the Bass50's sealed enclosure into a fourth-order bandpass system with up to 9dB more output (132.4dB peak). The Stacking Kit's four tool-free clamps fasten two Universal Ports together, doubling your low end while keeping the floor footprint of a single sub. If you already use a Trulli Single Dolly, it holds up to two Bass50s with two Universal Ports.

The M20 Threaded Pole Plate attaches with the Bass50's own hardware and adds a threaded M20 socket,… read more plus built-in brackets for sandbags. The included 1-foot Trulli/K&M M20 pole keeps a top speaker low and compact above the stack, with a 77-pound maximum load. A spare Main Power battery is included too, for up to 7 more hours at full volume.

Features:

- Adds a second battery-powered Bass50 10" subwoofer and Universal Port to your system
- Universal Port adds up to 9dB of output (132.4dB peak)
- Stacking Kit with 4 tool-free clamps for a secure dual stack
- M20 Threaded Pole Plate with sandbag brackets
- 1-foot M20 speaker pole for a compact top-speaker mount
- Two batteries total: one installed, one spare
- SKAA Pro low-latency wireless and Bluetooth 5.1

Package Includes:

- Bass50 Rugged Battery-Powered Subwoofer (battery installed)
- Rugged Universal Port for Bass50
- Stacking Kit for Dual Bass50 Subwoofers
- M20 Threaded Pole Plate for Bass50
- K&M M20 Speaker Pole for Bass50 (1 Foot)
- Spare Main Power Swappable Rechargeable Battery for Bass50
read less

Bass50 Subwoofer Specifications:

Finish:
Tough exterior finish for protection against the elements and wear.
Dimensions:
20.25" x 17.1" x 8" (with feet attached)
Weight:
35.1 lb
Power:
300 W; Removable rechargeable battery
Inputs:
USB-C (digital), 3.5mm AUX (TRS), Bluetooth 5.1, SKAA Pro (wireless)
Outputs:
USB-C (digital), 3.5mm AUX (TRS), SKAA Pro (wireless)
Max SPL (dB):
122.7dB peak; 132.4dB peak with Universal Port
Frequency Range:
20Hz to 225Hz

Universal Port Specifications:

Dimensions:
20.2" x 17.1" x 14.9"
Weight:
30.9 lb
Features:
M20 threaded pole mount socket
Materials:
Baltic birch plywood; rugged Dura Tex textured speaker cabinet coating
Performance:
Adds up to 9dB to the output of the Bass50
Dimensions (with Bass50 attached):
20.2 x 17.1 x 22 in
Weight (with Bass50 attached):
66 lbs
Pole Mount:
M20 (Rugged Edition only)

M20 Threaded Pole Plate Specifications:

Compatibility:
Bass50 and Universal Port
Features:
  • Threaded M20 socket for mounting speaker poles.
  • Attaches to Bass50 or Universal Port using those products' existing hardware.
  • Built-in brackets for adding sand bags for additional weight.

M20 Speaker Pole (1 Foot) Specifications:

Max. load capacity:
77 lbs
Mounting Thread:
M20 threaded bolt
Speaker Mount:
Expanding mandrel with Ring Lock, for 35mm speaker sockets
Tube Material:
Steel, powder coated
Ring Lock Material:
Aluminum
Mandrel Elements:
Polyamide (PA)

Main Power Battery Specifications:

Playtime Expectancy:
7 hours at full volume; 20 hours at moderate volume; 40 hours at low volume
Battery chemistry:
LiFePO4
Battery config:
5s3p
Weight:
3.7 lbs
Voltage:
16 V
Watt Hour:
172.8 Wh
Life Expectancy:
greater than 2500 discharge cycles
Charge temp:
0 to 60 degrees C / 32 to 140 degrees F
Discharge temp:
-20 to 60 degrees C / -4 to 140 degrees F

Dimensions and Weight in Packaging

Base Item

  • Shipping Weight: 114.66 lbs

For support or warranty questions, please contact the manufacturer:
Phone: +1 (888) 357-4199
Email: hello@trulliaudio.com
Web: https://trulliaudio.com/pages/contact-trulli-audio

New

$6,137.00
  • 12  Interest-Free Payments
  • 8  Interest-Free Payments
Other Financing Options
  • 18 payments of

FREE -Day Shipping!
Get it for 
Get it (or get it with an order of ), if you order within
Shipping to