TASCAM Series 102i USB Audio Interface

TASCAM's Series 102i USB interface gives you 2 Ultra-HDDA mic preamps with individual phantom power, ADAT optical input, and MIDI I/O in a portable package.

The TASCAM Series 102i 10-In/2-Out USB Audio/MIDI Interface provides professional quality, expandability, both internal and bundled effects processing, internal mixing, external software control, and more for studio, home, and live recording. With a new look, including an angled tabletop design and large, easy-to-grab knobs, TASCAM sets a new standard for mid-grade audio interfaces.

Start Making Music Immediately with Bundled Software

TASCAM SERIES audio interfaces are bundled with a series of software that allow full operational coverage: at the core of music production is Steinberg's Cubase LE / Cubasis LE; for instrumental recordings comes IK Multimedia's AmpliTube with guitar/bass modeling and colorful effects; newly added to the bundle is iZotope's redesigned Neutron Elements, which includes 4 powerful tools for creating great mixes; last but not least, IK Multimedia's T-RackS mastering software will finish up users' creations into high quality masterpieces.

Features:

- Equipped with two EIN-129dBu achieving TASCAM high-grade Ultra-HDDA mic preamps
- Installed with high spec input audio circuits that enabling low noise recording
- Supports audio formats up to 24 bit / 192 kHz
- 10 in/2 out maximum via USB 2.0 connection
- Expansible to up to 8 inputs via S/MUX supported OPTICAL input
- 8 input @44.1 k/48 kHz
- 4 input @88.2 k/96 kHz
- 2 input @176.4 k/192 kHz
- Compatible with Windows / Mac computers and read more iOS devices (supports UAC2.0)
- Stable driver operation with low latency (in-house developed driver for Windows devices)
- Equipped with two 18mW/ch stereo standard headphone output connectors
- Equipped with two balanced input XLR/TRS combo connectors
- [MIC/LINE]-[INST (Hi-Z)]-[+48V Phantom] slide switch installed
- Phantom power supply applicable to each input channel individually
- Mixer/Routing/TASCAM FXs (COMP, EQ, Reverb) functions installed
- Controllable with the Settings Panel software Reverb effects invalid for 4Fs
- Rugged all-metal casing
- Automatic update function available for software/driver/firmware updates
- Information window function(shown in the Settings Panel screen)
- Direct monitor option for low latency monitoring
- Compatible with mainstream DAW software (Pro Tools, Live, Cubase, Studio One, GarageBand)
- Includes Steinberg Cubase DAW software and IK Multimedia AmpliTube and T-RackS world-class guitar effects/modeling and mastering software, and iZotope Neutron Elements mixing plug-ins
read less

Sampling frequencies: 44.1, 48, 88.2, 96, 176.4, 192 kHz
Quantization bit depth: 16/24-bit
Mic Inputs (BALANCED): 1-2 (when the input switch is set to MIC/LINE)
Connector: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
Input impedance: 1.5 kohm
Rated input level: -64 dBu (0.0005 Vrms, GAIN knob at MAX)/- 6 dBu (0.388 Vrms, GAIN knob at MIN)
Maximum input level: +10 dBu (2.45 Vrms)
Gain range: 58 dB 1-2 (when the input switch is set to INST)
Connectors: 6.3mm (1/4”) standard TS jacks (Tip: HOT, Sleeve: GND)
Input impedance: 1 Mohm or more
Rated input level: -64 dBV (0.0006 Vrms, GAIN knob at MAX)/ -6 dBV (0.501 Vrms, GAIN knob at MIN)
Maximum input level: +10 dBV (3.162 Vrms)
Gain range: 58 dB 1-2 (when the input switch set to MIC/LINE)
Connectors: 6.3 mm (1/4 “) standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: 10 kohm
Rated input level: -54 dBu (0.0015 Vrms, GAIN knob at MAX)/ +4 dBu (1.228 Vrms, GAIN knob at MIN)
Maximum input level: +24 dBu (12.282 Vrms)
Gain range: 58 dB

Analog outputs:
Monitor outputs: (balanced, LINE OUT 1-2)
Connectors: 6.3mm (1/4”) standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
Output impedance: 230 ohm
Nominal output level: +4 dBu (1.228 Vrms)
Maximum output level: +20 dBu (7.75 Vrms)
Headphone outputs (PHONES 1/2):
- Connectors 6.3mm (1/4”) standard stereo jacks
- Maximum output 18mW + 18mW (THD+N 0.1% or less, into 32 O load)

Digital audio input ratings:
Optical (S/MUX): IN
Connector: OPTICAL (JEITA RC-5720C)
Signal format: Multi-channel optical format (Supports S/MUX when 88.2, 96, 176.4 or 192 kHz)
Control input/output: USB
Mic amp EIN (equivalent input noise):-129 dBu or lower
Frequency response MIC/LINE IN thru LINE OUT:
- At 44.1/48 kHz, 20 Hz – 20 kHz: +0 dB/1 dB (JEITA)
- At 88.2/96 kHz, 20 Hz – 40 kHz: +0 dB/2 dB (JEITA)
- At 176.4/192 kHz, 20 Hz – 80 kHz: +0 dB/12 dB (JEITA)
S/N ratio: 106 dB or higher (MIC/LINE thru LINE OUT, GAIN knob at minimum, JEITA)
Distortion: 0.005 % or less (MIC/LINE thru LINE OUT, 1kHz sine wave, full-scale -2 dB input level, MONITOR knob at maximum)
Crosstalk: 100 dB or more (MIC/LINE thru LINE OUT, 1kHz sine wave, GAIN knob at minimum)

Computer System Requirements:
Windows:
- Supported operating systems Windows 10 32-bit
- Windows 10 64-bit
- Windows 8.1 32-bit
- Windows 8.1 64-bit
- Windows 7 32-bit SP1 or later
- Windows 7 64-bit SP1 or later (Windows Vista and Windows XP are not supported)

Computer hardware requirements:
Windows:
- Windows computer with a USB port that supports at least USB 2.0 or USB 3.0
- CPU/processor speed 2 GHz or faster dual core processor (x86)
- Memory 2 GB or more
MAC:
- Supported operating systems macOS Mojave (10.14 or later)
- macOS High Sierra (10.13 or later)
- macOS Sierra (10.12 or later)
- Mac with a USB port that supports at least USB 2.0 or USB 3.0
- CPU/processor speed 2 GHz or faster dual core processor
- Memory 2 GB or more
- iOS device Apple iOS device running iOS 10 or later
- IOS DEVICE

Supported audio drivers:
- Windows USB Audio Class 2.0, ASIO 2.2, WDM (MME), MIDI
- Mac Core Audio, Core MIDI
- iOS device Core Audio for iPhone
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 3.75 lbs
Shipping Dimensions: 13 x 9 x 4 in
Manufacturer Part Number (MPN): TAS SERIES102I

For support or warranty questions, please contact the manufacturer:
Phone: (323) 726-0303
Web: https://tascam.com/us/support/contact

New

$299.00
On Backorder
Preorder Today
FREE -Day Shipping!
Get it  for
×
Get it by if you order within
Shipping to
SALE: Save $100! Was $399, Now $299
  • For a limited time, save $100 when you buy this product at zZounds. Hurry -- sale ends January 31!

Get TM-80 and TM-82 Microphones and TH-02 Headphones FREE from TASCAM!
  • Only through January 31, register your new gear and you'll receive a TM-80 mic, TM-82 mic, and TH-02 headphones, FREE from TASCAM! See link for details. Learn more »