Tannoy Gold 5 Powered 5" Studio Monitor
Whether you're recording, editing, mixing, or mastering audio, a truly great studio reference monitor design needs to provide the most accurate, uncolored representation of your music as possible. Tannoy Gold nearfield reference monitors have been created to serve the demanding needs of professionals in recording, broadcast and post-production environments. Engineered to the highest standards and build quality, the Gold 5 will impress you whether you're a seasoned Tannoy user or just taking your first step up to a monitor system based on the legendary Dual Concentric driver.
Get a closer look at Tannoy's Gold powered studio monitors in this 2-minute overview:
Times may have changed, but Tannoy's engineering values and commitment to perfection have not. Everything they do today is judged against their considerable achievements of the past as they continue to advance the art and science of building the world's premier reference monitors. Constant refinement of our famed Dual Concentric driver, advanced Klippel analysis and a host of other technologies ensure that with every new product comes another historic chapter. Thanks to the integrated design, the speakers and the amplifiers are designed as one. Breathtaking yesterday; equally breathtaking today...
Obsessive About Precision
Clearly, to build the best studio monitors you must start with the very best drivers. At Tannoy, their reputation for excellence is built on the quality and performance of the speaker systems they build, and that is why they continue to design and manufacture their own drivers. Tannoy has long held to a philosophical stand on crossover points, understanding the anomalous effects of any crossover network with respect to phase. Their monitor designs have consequently always strived to minimise the number of crossover points that fall inside the critical response band. Reducing the number of crossover points reduces potential phase errors and creates a more natural and accurate device.
Tannoy Dual Concentric
At the heart of the GOLD 5's superb performance you will find a distinct iteration of their legendary and exclusive Tannoy Dual Concentric Driver Technology. With seven decades of refinement behind it, the Dual Concentric driver represents a near-perfect point source, preserving the tonal character and harmonic structure of program material as no discrete-driver system can. The benefits are immediately obvious with flat response, controlled dispersion and a wider sweet-spot in both the horizontal and vertical planes.
Point Source Tulip Waveguide
In nature, all sounds emanate from a single point in space. By centrally-locating the high frequency unit of the Dual Concentric configuration, GOLD 5 acoustically replicates the single point sound source, delivering exceptionally natural performance with an incredibly wide imaging "sweet-spot". Delivery is further enhanced by the implementation of a highly-innovative point source Tulip Waveguide with symmetrical dispersion, which provides a broad soundstage with remarkably focused and accurate stereo imaging.
Suited For All Placements
The ideal environment for listening is a room that is "flat," neither too reflective (reverberent) nor too absorptive (where the sound is muffled). But since all rooms are not the same acoustically, your GOLD 5 comes equipped to function in a wide variety of environments. HF trim control, and a rear panel filter switch is provided to adapt the monitor's low frequency characteristics for the effects of boundary conditions.
Bi-Amplification Via Class-AB
Why Class-AB? The duty of any amplifier is to take a small input signal and turn it into a louder output that maintains the characteristics of the original signal, and to be large enough to meet the demands of the loudspeaker it drives. While Class-A amplifiers sound great at low volumes, they waste a tremendous amount of power that is lost as heat when asked to output hundreds of Watts. And even though Class-B amplifiers are much more efficient, they tend to bring a great deal of distortion to the mix. A Class-AB amplifier combines the linear performance of Class-A with the higher efficiency performance of Class-B, producing a much better amplifier design for loudspeakers used in critical listening environments.
GOLD 5 allows you to connect up to 2 audio sources simultaneously thanks to its continually-active XLR and TRS inputs, and assign Left or Right when connected to a 3.5mm TRS jack plug. Switchable intelligent signal sensing circuitry is included, ensuring that when your system is not in use, your monitors switch into an environmentally friendly, power-saving stand-by mode.
- Premium 200 Watt bi-amped nearfield studio reference monitor for accurate sound reproduction with outstanding definition
- Ultra-precise and neutral soundstage delivers non-fatiguing sound for extended listening sessions
- Legendary Tannoy Dual Concentric driver technology provides class-leading phase coherence and point-source imaging
- Front-firing bass port design allows for near-wall placement and ensures optimal low frequency performance
- Next generation 5" Dual Concentric driver secures unrivalled musical articulation and outstanding dynamics
- 0.75" titanium tweeter with Tulip waveguide produces detailed stereo image with widened "sweet spot"
- Class-AB system with transducer-matched LF and HF bi-amplification for accurate dynamics
- Continually-active XLR and TRS phone jack inputs let you connect up to 2 audio sources
- Dedicated input trim, bass and treble controls let you optimise the audio for your listening conditions
- Selectable automatic standby mode conserves energy
- Tannoy - over 90 years of British audio innovation
- 3-Year Warranty Program
- Designed and engineered in the U.K.
zZounds is an authorized dealer of Tannoy products.
- Frequency Response:
- 70 Hz - 20 kHz +/-3 dB
- 49 Hz - 20 kHz -10 dB- Nominal Dispersion:
90 degree conical @ -6 dB point- Maximum SPL:
107 dB- Crossover Type:
2 way, active- Crossover Frequency:
2 kHz- Transducers:
- 1 x 5" (127 mm) LF driver
- 1 x 0.8" (20 mm) HF drivers- Limiter:
Independent high and low frequency limiters- Magnetic Shielding:
No- Maximum Output Power:
200 W- Type:
Short circuit, thermal- Inputs:
- 1 x XLR, balanced
- 1 x 1/4 " TRS, balanced
- 3.5 mm stereo mini jack- Sensitivity:
0 dBu, nominal- Input Impedance:
5 kOhm unbalanced, 10 kOhm balanced- Maximum Input Level:
+20 dBu- Outputs:
Monitor Link, 3.5 mm stereo mini jack- User Controls:
Power on / off, Input trim, HF trim, Bass adjustment, Auto-standby on / off- Power Consumption:
50 W @ 1/8 max power- Voltage (Fuses):
100-240 V~, 50/60 Hz (T 3.15 A L 250 V)- Mains Supply:
IEC mains connector with integrated power switch- Dimensions (H x W x D):
294 x 183 x 252 mm (11.6 x 7.2 x 9.9")- Net Weight:
5.8 kg (12.8 lbs)
- Weight, Dimensions, and Manufacturer Part Numbers
Manufacturer Part Number (MPN):