Rode RODECaster Pro Podcast Console
The RODECaster Pro is the world's first fully integrated podcast production studio. Whether you're just starting out, or a seasoned broadcast professional, the RODECaster Pro Podcast Production Studio is all you will ever need.
Connect and record
The 4 high-quality microphone channels are able to power studio condenser microphones as well as conventional dynamic microphones. You can quickly connect microphones for you and your guests with automatic level setting and one-touch recording to a microSD card. You can literally be recording your first podcast within minutes of taking the RODECaster Pro out of the box.
Get started with the RODECaster Pro with this intro video:
Record your podcast with the RODECaster's SD card slot or USB output to your computer:
Download updated firmware for more features
Rode has updated the RODECaster's firmware with a host of new features, including:
- Ability to save and load a snapshot of the RØDECaster's settings -- called 'Shows'
- Podcast Transfer Mode: allows users to transfer podcasts direct from the microSD to a computer
- New sound pad functionality
- New broadcast-ready features (pre-fade listen, "off-air" caller communication & more).
- Tweaked audio engine for clearer, sparklier podcasts!
See what's new in Rode's Firmware 2.0 update for the RODECaster Pro:
Sound Effects and Jingles
The RODECaster Pro comes with eight programmable sound effects pads, for instant triggering of sound effects, music, jingles, applause and ads – perfect for giving your podcast that professional quality. You can record audio direct to the programmable pads from any input, or simply "drag and drop" files from your computer using the supplied software. You can even select your favourite colours for the pad illumination.
See how to use the RODECaster's sound pads in your productions:
Have a remote guest you want to interview? Simply connect your phone to the RODECaster Pro via Bluetooth or with a TRRS cable. The RODECaster Pro automatically provides "mix-minus" audio to prevent echo being heard by the caller, without the need to purchase dedicated and costly hardware. Telephone interviews with a remote guest never sounded so good!
Sound like a million dollars: Class A Servo-biased Preamps
The RODECaster Pro's pristine preamps and outputs feature Class A circuitry, as found in broadcast consoles that cost hundreds of thousands of dollars. The Class A preamps provide a much cleaner gain structure with lower levels of distortion. The result is an incredibly clean, low-noise signal. The Preamps are also servo-biased, keeping distortion levels low. Your signal is broadcast-pure.
Plug up to four microphones into the RODECaster Pro and set your levels:
APHEX On Board
Your pristine signal can also be enhanced with the legendary patented audio processors, APHEX Aural Exciter and APHEX Big Bottom. These have been incorporated in the audio processing section of the RODECaster Pro, and your sound will have that rich, warm tone only found in professional studios. The RODECaster Pro also features multistage dynamics, such as compression, limiting, de-essing and noise-gating.
The RODECaster Pro operates as a standalone unit straight out of the box, recording your finished podcast direct to a microSD™ card. The RODECaster Pro also connects to your computer as a USB audio interface, so you can record your podcast to your favourite recording software, or stream live. And with the 1.1.0 firmware version available for download, you will also be able to record in multi-channel mode, allowing you to separately record each of the sources to its own track for later post-production.
zZounds is an authorized dealer of RODE products.
- Mic Inputs:
20 Hz – 20 kHz, -3dB at 20 Hz (high-pass filter)- Monitor Outputs:
20 Hz – 20 kHz better than ±0.5dB- Input Impedance:
600O (Mic Preamplifiers)- Equivalent Noise:
–125dBA (A-Weighted, measured as per IEC651)- Maximum Output Level:
+3dBu (Monitor Outputs)- Headphone Output Power:
Max output power at 1% THD: 32O –> 220mW | 300O –> 31mW- Dynamic Range:
100 dBA (Mic Preamplifiers)- Gain Range:
0dB – 55dB (Mic Preamplifiers)- Power Requirements:
External DC power supply 12 - 15v DC, 1A- Output Connection:
USB-C, 1/4” Balanced TRS STEREO (Monitor Outputs)- Computer Connectivity:
USB- Bit Depth:
24-Bit- Sample Rates:
48 kHz- Storage:
microSD card slot, 512MB internal memory for storing sounds for programmable pads- OS Requirements:
- Weight, Dimensions, and Manufacturer Part Numbers
- Base Item
Manufacturer Part Number (MPN):
- with Single Microphone Pack
- with Rodecast Microphone Pack
- with Four Microphone Pack