Rode Complete Studio Kit with NT1 Microphone and AI-1 USB Audio Interface

Rode NT1 Microphone Specifications:

- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 1-inch
- Directional Pattern: Cardioid
- Address Type: Side
- Frequency Range: 20Hz - 20kHz
- Output Impedance: 100 Ohm
- Equivalent Noise: 4.5 dBA SPL
- Maximum Output: +8 dBu (1kHz, 1% THD into 1K Ohm load)
- Sensitivity: -29 dB re 1V/Pa (35mV @ 94dB SPL) +/- 2dB @ 1kHz
- Dynamic Range: 128 dB SPL
- Maximum SPL: 132 dB SPL
- Signal / Noise: 90 dBA SPL (as per IEC651)
- Power Requirements: 24V phantom power, 48V phantom power
- Output Connection: 3-Pin XLR
- Balanced output: between pin 2 (+), pin 3 (-) and pin 1 (ground)
- Weight: 0.97 lb. (440 grams)

Rode AI-1 Audio Interface Specifications:


- Computer Connectivity: USB
- Form Factor: Desktop
- Simultaneous I/O: 1 x 2
- Number of Preamps: 1
- Phantom Power: Yes
- Bit Depth: 24-bit
- Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Analog Inputs: 1 x Neutrik XLR-1/4" combo
- Analog Outputs: 2 x 1/4" (impedance balanced), 1 x 1/4" (headphones)
- Direct Monitor: Yes
- USB: 1 x USB Type C
- Bus Powered: Yes
- OS Requirements: Mac OS 10.10 or later, Windows 7 or later
- Power: USB bus-powered
- Depth: 88mm chassis, 100mm total (with knobs)
- Width: 124mm
- Height: 38mm
- Weight: 1 lb 3.7oz (560g)

XLR/MIC INPUT:
- Dynamic Range: 104 dBA
Equivalent Input Noise @ Maximum Gain (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted): –128dBA
- Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
- Gain Range: 0dB – >45dB
- Input Impedance: 1.3k Ohms

INSTRUMENT INPUT:
- Dynamic Range 99 dBA
- Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
- Gain Range: 0dB – >45dB
- Input Impedance: 900k Ohms

MONITOR OUTPUTS:
- Maximum Output Level: -6dBu
Frequency Response: 20Hz – 20kHz better than ±1dB

HEADPHONE:
- Max output power at 1% THD: 32 Ohms – >210mW, 300 Ohms – >390mW
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 5.5 lbs
Shipping Dimensions: 15 x 11 x 5 in
Manufacturer Part Number (MPN): NT1 AI1 Bundle
If you have additional warranty questions, please contact the manufacturer at 562-364-7400
Shipping to
💬
Chat With Us