Peavey SP218 II Passive, Unpowered Subwoofer (2400 Watts, 2x18")

Peavey SP218 II Passive, Unpowered Subwoofer (2400 Watts, 2x18"), New, Left

Peavey SP218 II Passive, Unpowered Subwoofer (2400 Watts, 2x18"), New, Right

zZounds Gear Experts Say...

Rock the club with this dual 18" sub! Handling 2400 watts program and 4000 watts peak, Peavey's SP218 II passive subwoofer reaches all the way down to 41 Hz.

Overview

The Peavey SP 218 subwoofer features two 18" Pro Rider woofers. Power handling is 2,400 watts program and 4,800 watts peak, with low frequency response down to 41Hz. Inputs include one four-pin twist lock connector and two 1/4" phone jacks all in parallel, and one Neutrik Speakon switching jack for independent access to the woofers. Threaded pole for mount included.

Features:

- Two 18" Pro Rider woofers
- 2,400 watts program, and 4,800 watts peak power handling
- 4 ohms (dual 8 ohm via switch jack)
- Low frequency response down to 41Hz
- Inputs include one four-pin twist lock connector and two 1/4" phone jacks all in parallel, and one Neutrik Speakon switching jack for independent access to the woofers
- Threaded pole for mount included
- Pole mount plate built-in, threaded for positive pole support
- Full-length, wraparound perforated steel grille
- Tilt-back casters

Note: Unpowered speaker, requires separate power amplifier.

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

Pole Socket Size: M20 threaded

- Weight Unpacked: 133.38 lb (60.5 kg)
- Weight Packed: 139.99 lb (63.5 kg)
- Width Packed: 29.92" (75.9968 cm)
- Height Packed: 51.18" (129.9972 cm)
- Depth Packed: 23.62" (59.9948 cm)

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 164.5 lbs; Shipping Dimensions: 51 x 30 x 24 in; Manufacturer Part Number (MPN): 03614830

Note: Unpowered speaker, requires separate power amplifier.

Documents and Manuals

For support or warranty questions, please contact the manufacturer:
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us

Reviews

(3 ratings)

Submitted October 1, 2024 by Lynn P in Radcliff, KY

"Clear Vibrations"

Overall:

(see rating details)

Verified Purchaser zZounds has verified that this reviewer purchased this specific product from us.

In order to get the clarity and good definition you will need a good crossover and high - pass filter with these. I set my crossover at around 90-100 Hz. I drive each cabinet with 3000 watts in bridge mode and have had no problems. I use these inside and outside and would have to say I've been impressed. The casters are a dream due to these being on the heavy side. Nice BOOM for the BUCK!